1.. SPDX-License-Identifier: GPL-2.0
2
3.. _devlink_port:
4
5============
6Devlink Port
7============
8
9``devlink-port`` is a port that exists on the device. It has a logically
10separate ingress/egress point of the device. A devlink port can be any one
11of many flavours. A devlink port flavour along with port attributes
12describe what a port represents.
13
14A device driver that intends to publish a devlink port sets the
15devlink port attributes and registers the devlink port.
16
17Devlink port flavours are described below.
18
19.. list-table:: List of devlink port flavours
20   :widths: 33 90
21
22   * - Flavour
23     - Description
24   * - ``DEVLINK_PORT_FLAVOUR_PHYSICAL``
25     - Any kind of physical port. This can be an eswitch physical port or any
26       other physical port on the device.
27   * - ``DEVLINK_PORT_FLAVOUR_DSA``
28     - This indicates a DSA interconnect port.
29   * - ``DEVLINK_PORT_FLAVOUR_CPU``
30     - This indicates a CPU port applicable only to DSA.
31   * - ``DEVLINK_PORT_FLAVOUR_PCI_PF``
32     - This indicates an eswitch port representing a port of PCI
33       physical function (PF).
34   * - ``DEVLINK_PORT_FLAVOUR_PCI_VF``
35     - This indicates an eswitch port representing a port of PCI
36       virtual function (VF).
37   * - ``DEVLINK_PORT_FLAVOUR_PCI_SF``
38     - This indicates an eswitch port representing a port of PCI
39       subfunction (SF).
40   * - ``DEVLINK_PORT_FLAVOUR_VIRTUAL``
41     - This indicates a virtual port for the PCI virtual function.
42
43Devlink port can have a different type based on the link layer described below.
44
45.. list-table:: List of devlink port types
46   :widths: 23 90
47
48   * - Type
49     - Description
50   * - ``DEVLINK_PORT_TYPE_ETH``
51     - Driver should set this port type when a link layer of the port is
52       Ethernet.
53   * - ``DEVLINK_PORT_TYPE_IB``
54     - Driver should set this port type when a link layer of the port is
55       InfiniBand.
56   * - ``DEVLINK_PORT_TYPE_AUTO``
57     - This type is indicated by the user when driver should detect the port
58       type automatically.
59
60PCI controllers
61---------------
62In most cases a PCI device has only one controller. A controller consists of
63potentially multiple physical, virtual functions and subfunctions. A function
64consists of one or more ports. This port is represented by the devlink eswitch
65port.
66
67A PCI device connected to multiple CPUs or multiple PCI root complexes or a
68SmartNIC, however, may have multiple controllers. For a device with multiple
69controllers, each controller is distinguished by a unique controller number.
70An eswitch is on the PCI device which supports ports of multiple controllers.
71
72An example view of a system with two controllers::
73
74                 ---------------------------------------------------------
75                 |                                                       |
76                 |           --------- ---------         ------- ------- |
77    -----------  |           | vf(s) | | sf(s) |         |vf(s)| |sf(s)| |
78    | server  |  | -------   ----/---- ---/----- ------- ---/--- ---/--- |
79    | pci rc  |=== | pf0 |______/________/       | pf1 |___/_______/     |
80    | connect |  | -------                       -------                 |
81    -----------  |     | controller_num=1 (no eswitch)                   |
82                 ------|--------------------------------------------------
83                 (internal wire)
84                       |
85                 ---------------------------------------------------------
86                 | devlink eswitch ports and reps                        |
87                 | ----------------------------------------------------- |
88                 | |ctrl-0 | ctrl-0 | ctrl-0 | ctrl-0 | ctrl-0 |ctrl-0 | |
89                 | |pf0    | pf0vfN | pf0sfN | pf1    | pf1vfN |pf1sfN | |
90                 | ----------------------------------------------------- |
91                 | |ctrl-1 | ctrl-1 | ctrl-1 | ctrl-1 | ctrl-1 |ctrl-1 | |
92                 | |pf0    | pf0vfN | pf0sfN | pf1    | pf1vfN |pf1sfN | |
93                 | ----------------------------------------------------- |
94                 |                                                       |
95                 |                                                       |
96    -----------  |           --------- ---------         ------- ------- |
97    | smartNIC|  |           | vf(s) | | sf(s) |         |vf(s)| |sf(s)| |
98    | pci rc  |==| -------   ----/---- ---/----- ------- ---/--- ---/--- |
99    | connect |  | | pf0 |______/________/       | pf1 |___/_______/     |
100    -----------  | -------                       -------                 |
101                 |                                                       |
102                 |  local controller_num=0 (eswitch)                     |
103                 ---------------------------------------------------------
104
105In the above example, the external controller (identified by controller number = 1)
106doesn't have the eswitch. Local controller (identified by controller number = 0)
107has the eswitch. The Devlink instance on the local controller has eswitch
108devlink ports for both the controllers.
109
110Function configuration
111======================
112
113A user can configure the function attribute before enumerating the PCI
114function. Usually it means, user should configure function attribute
115before a bus specific device for the function is created. However, when
116SRIOV is enabled, virtual function devices are created on the PCI bus.
117Hence, function attribute should be configured before binding virtual
118function device to the driver. For subfunctions, this means user should
119configure port function attribute before activating the port function.
120
121A user may set the hardware address of the function using
122'devlink port function set hw_addr' command. For Ethernet port function
123this means a MAC address.
124
125Subfunction
126============
127
128Subfunction is a lightweight function that has a parent PCI function on which
129it is deployed. Subfunction is created and deployed in unit of 1. Unlike
130SRIOV VFs, a subfunction doesn't require its own PCI virtual function.
131A subfunction communicates with the hardware through the parent PCI function.
132
133To use a subfunction, 3 steps setup sequence is followed.
134(1) create - create a subfunction;
135(2) configure - configure subfunction attributes;
136(3) deploy - deploy the subfunction;
137
138Subfunction management is done using devlink port user interface.
139User performs setup on the subfunction management device.
140
141(1) Create
142----------
143A subfunction is created using a devlink port interface. A user adds the
144subfunction by adding a devlink port of subfunction flavour. The devlink
145kernel code calls down to subfunction management driver (devlink ops) and asks
146it to create a subfunction devlink port. Driver then instantiates the
147subfunction port and any associated objects such as health reporters and
148representor netdevice.
149
150(2) Configure
151-------------
152A subfunction devlink port is created but it is not active yet. That means the
153entities are created on devlink side, the e-switch port representor is created,
154but the subfunction device itself is not created. A user might use e-switch port
155representor to do settings, putting it into bridge, adding TC rules, etc. A user
156might as well configure the hardware address (such as MAC address) of the
157subfunction while subfunction is inactive.
158
159(3) Deploy
160----------
161Once a subfunction is configured, user must activate it to use it. Upon
162activation, subfunction management driver asks the subfunction management
163device to instantiate the subfunction device on particular PCI function.
164A subfunction device is created on the :ref:`Documentation/driver-api/auxiliary_bus.rst <auxiliary_bus>`.
165At this point a matching subfunction driver binds to the subfunction's auxiliary device.
166
167Terms and Definitions
168=====================
169
170.. list-table:: Terms and Definitions
171   :widths: 22 90
172
173   * - Term
174     - Definitions
175   * - ``PCI device``
176     - A physical PCI device having one or more PCI buses consists of one or
177       more PCI controllers.
178   * - ``PCI controller``
179     -  A controller consists of potentially multiple physical functions,
180        virtual functions and subfunctions.
181   * - ``Port function``
182     -  An object to manage the function of a port.
183   * - ``Subfunction``
184     -  A lightweight function that has parent PCI function on which it is
185        deployed.
186   * - ``Subfunction device``
187     -  A bus device of the subfunction, usually on a auxiliary bus.
188   * - ``Subfunction driver``
189     -  A device driver for the subfunction auxiliary device.
190   * - ``Subfunction management device``
191     -  A PCI physical function that supports subfunction management.
192   * - ``Subfunction management driver``
193     -  A device driver for PCI physical function that supports
194        subfunction management using devlink port interface.
195   * - ``Subfunction host driver``
196     -  A device driver for PCI physical function that hosts subfunction
197        devices. In most cases it is same as subfunction management driver. When
198        subfunction is used on external controller, subfunction management and
199        host drivers are different.
200