1======================
2Linux Kernel Makefiles
3======================
4
5This document describes the Linux kernel Makefiles.
6
7.. Table of Contents
8
9	=== 1 Overview
10	=== 2 Who does what
11	=== 3 The kbuild files
12	   --- 3.1 Goal definitions
13	   --- 3.2 Built-in object goals - obj-y
14	   --- 3.3 Loadable module goals - obj-m
15	   --- 3.4 <deleted>
16	   --- 3.5 Library file goals - lib-y
17	   --- 3.6 Descending down in directories
18	   --- 3.7 Non-builtin vmlinux targets - extra-y
19	   --- 3.8 Always built goals - always-y
20	   --- 3.9 Compilation flags
21	   --- 3.10 Dependency tracking
22	   --- 3.11 Custom Rules
23	   --- 3.12 Command change detection
24	   --- 3.13 $(CC) support functions
25	   --- 3.14 $(LD) support functions
26	   --- 3.15 Script Invocation
27
28	=== 4 Host Program support
29	   --- 4.1 Simple Host Program
30	   --- 4.2 Composite Host Programs
31	   --- 4.3 Using C++ for host programs
32	   --- 4.4 Controlling compiler options for host programs
33	   --- 4.5 When host programs are actually built
34
35	=== 5 Userspace Program support
36	   --- 5.1 Simple Userspace Program
37	   --- 5.2 Composite Userspace Programs
38	   --- 5.3 Controlling compiler options for userspace programs
39	   --- 5.4 When userspace programs are actually built
40
41	=== 6 Kbuild clean infrastructure
42
43	=== 7 Architecture Makefiles
44	   --- 7.1 Set variables to tweak the build to the architecture
45	   --- 7.2 Add prerequisites to archheaders
46	   --- 7.3 Add prerequisites to archprepare
47	   --- 7.4 List directories to visit when descending
48	   --- 7.5 Architecture-specific boot images
49	   --- 7.6 Building non-kbuild targets
50	   --- 7.7 Commands useful for building a boot image
51	   --- 7.8 <deleted>
52	   --- 7.9 Preprocessing linker scripts
53	   --- 7.10 Generic header files
54	   --- 7.11 Post-link pass
55
56	=== 8 Kbuild syntax for exported headers
57		--- 8.1 no-export-headers
58		--- 8.2 generic-y
59		--- 8.3 generated-y
60		--- 8.4 mandatory-y
61
62	=== 9 Kbuild Variables
63	=== 10 Makefile language
64	=== 11 Credits
65	=== 12 TODO
66
671 Overview
68==========
69
70The Makefiles have five parts::
71
72	Makefile                    the top Makefile.
73	.config                     the kernel configuration file.
74	arch/$(SRCARCH)/Makefile    the arch Makefile.
75	scripts/Makefile.*          common rules etc. for all kbuild Makefiles.
76	kbuild Makefiles            exist in every subdirectory
77
78The top Makefile reads the .config file, which comes from the kernel
79configuration process.
80
81The top Makefile is responsible for building two major products: vmlinux
82(the resident kernel image) and modules (any module files).
83It builds these goals by recursively descending into the subdirectories of
84the kernel source tree.
85The list of subdirectories which are visited depends upon the kernel
86configuration. The top Makefile textually includes an arch Makefile
87with the name arch/$(SRCARCH)/Makefile. The arch Makefile supplies
88architecture-specific information to the top Makefile.
89
90Each subdirectory has a kbuild Makefile which carries out the commands
91passed down from above. The kbuild Makefile uses information from the
92.config file to construct various file lists used by kbuild to build
93any built-in or modular targets.
94
95scripts/Makefile.* contains all the definitions/rules etc. that
96are used to build the kernel based on the kbuild makefiles.
97
98
992 Who does what
100===============
101
102People have four different relationships with the kernel Makefiles.
103
104*Users* are people who build kernels.  These people type commands such as
105"make menuconfig" or "make".  They usually do not read or edit
106any kernel Makefiles (or any other source files).
107
108*Normal developers* are people who work on features such as device
109drivers, file systems, and network protocols.  These people need to
110maintain the kbuild Makefiles for the subsystem they are
111working on.  In order to do this effectively, they need some overall
112knowledge about the kernel Makefiles, plus detailed knowledge about the
113public interface for kbuild.
114
115*Arch developers* are people who work on an entire architecture, such
116as sparc or ia64.  Arch developers need to know about the arch Makefile
117as well as kbuild Makefiles.
118
119*Kbuild developers* are people who work on the kernel build system itself.
120These people need to know about all aspects of the kernel Makefiles.
121
122This document is aimed towards normal developers and arch developers.
123
124
1253 The kbuild files
126==================
127
128Most Makefiles within the kernel are kbuild Makefiles that use the
129kbuild infrastructure. This chapter introduces the syntax used in the
130kbuild makefiles.
131The preferred name for the kbuild files are 'Makefile' but 'Kbuild' can
132be used and if both a 'Makefile' and a 'Kbuild' file exists, then the 'Kbuild'
133file will be used.
134
135Section 3.1 "Goal definitions" is a quick intro; further chapters provide
136more details, with real examples.
137
1383.1 Goal definitions
139--------------------
140
141	Goal definitions are the main part (heart) of the kbuild Makefile.
142	These lines define the files to be built, any special compilation
143	options, and any subdirectories to be entered recursively.
144
145	The most simple kbuild makefile contains one line:
146
147	Example::
148
149		obj-y += foo.o
150
151	This tells kbuild that there is one object in that directory, named
152	foo.o. foo.o will be built from foo.c or foo.S.
153
154	If foo.o shall be built as a module, the variable obj-m is used.
155	Therefore the following pattern is often used:
156
157	Example::
158
159		obj-$(CONFIG_FOO) += foo.o
160
161	$(CONFIG_FOO) evaluates to either y (for built-in) or m (for module).
162	If CONFIG_FOO is neither y nor m, then the file will not be compiled
163	nor linked.
164
1653.2 Built-in object goals - obj-y
166---------------------------------
167
168	The kbuild Makefile specifies object files for vmlinux
169	in the $(obj-y) lists.  These lists depend on the kernel
170	configuration.
171
172	Kbuild compiles all the $(obj-y) files.  It then calls
173	"$(AR) rcSTP" to merge these files into one built-in.a file.
174	This is a thin archive without a symbol table. It will be later
175	linked into vmlinux by scripts/link-vmlinux.sh
176
177	The order of files in $(obj-y) is significant.  Duplicates in
178	the lists are allowed: the first instance will be linked into
179	built-in.a and succeeding instances will be ignored.
180
181	Link order is significant, because certain functions
182	(module_init() / __initcall) will be called during boot in the
183	order they appear. So keep in mind that changing the link
184	order may e.g. change the order in which your SCSI
185	controllers are detected, and thus your disks are renumbered.
186
187	Example::
188
189		#drivers/isdn/i4l/Makefile
190		# Makefile for the kernel ISDN subsystem and device drivers.
191		# Each configuration option enables a list of files.
192		obj-$(CONFIG_ISDN_I4L)         += isdn.o
193		obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o
194
1953.3 Loadable module goals - obj-m
196---------------------------------
197
198	$(obj-m) specifies object files which are built as loadable
199	kernel modules.
200
201	A module may be built from one source file or several source
202	files. In the case of one source file, the kbuild makefile
203	simply adds the file to $(obj-m).
204
205	Example::
206
207		#drivers/isdn/i4l/Makefile
208		obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o
209
210	Note: In this example $(CONFIG_ISDN_PPP_BSDCOMP) evaluates to 'm'
211
212	If a kernel module is built from several source files, you specify
213	that you want to build a module in the same way as above; however,
214	kbuild needs to know which object files you want to build your
215	module from, so you have to tell it by setting a $(<module_name>-y)
216	variable.
217
218	Example::
219
220		#drivers/isdn/i4l/Makefile
221		obj-$(CONFIG_ISDN_I4L) += isdn.o
222		isdn-y := isdn_net_lib.o isdn_v110.o isdn_common.o
223
224	In this example, the module name will be isdn.o. Kbuild will
225	compile the objects listed in $(isdn-y) and then run
226	"$(LD) -r" on the list of these files to generate isdn.o.
227
228	Due to kbuild recognizing $(<module_name>-y) for composite objects,
229	you can use the value of a `CONFIG_` symbol to optionally include an
230	object file as part of a composite object.
231
232	Example::
233
234		#fs/ext2/Makefile
235	        obj-$(CONFIG_EXT2_FS) += ext2.o
236		ext2-y := balloc.o dir.o file.o ialloc.o inode.o ioctl.o \
237			  namei.o super.o symlink.o
238	        ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o xattr_user.o \
239						xattr_trusted.o
240
241	In this example, xattr.o, xattr_user.o and xattr_trusted.o are only
242	part of the composite object ext2.o if $(CONFIG_EXT2_FS_XATTR)
243	evaluates to 'y'.
244
245	Note: Of course, when you are building objects into the kernel,
246	the syntax above will also work. So, if you have CONFIG_EXT2_FS=y,
247	kbuild will build an ext2.o file for you out of the individual
248	parts and then link this into built-in.a, as you would expect.
249
2503.5 Library file goals - lib-y
251------------------------------
252
253	Objects listed with obj-* are used for modules, or
254	combined in a built-in.a for that specific directory.
255	There is also the possibility to list objects that will
256	be included in a library, lib.a.
257	All objects listed with lib-y are combined in a single
258	library for that directory.
259	Objects that are listed in obj-y and additionally listed in
260	lib-y will not be included in the library, since they will
261	be accessible anyway.
262	For consistency, objects listed in lib-m will be included in lib.a.
263
264	Note that the same kbuild makefile may list files to be built-in
265	and to be part of a library. Therefore the same directory
266	may contain both a built-in.a and a lib.a file.
267
268	Example::
269
270		#arch/x86/lib/Makefile
271		lib-y    := delay.o
272
273	This will create a library lib.a based on delay.o. For kbuild to
274	actually recognize that there is a lib.a being built, the directory
275	shall be listed in libs-y.
276
277	See also "7.4 List directories to visit when descending".
278
279	Use of lib-y is normally restricted to `lib/` and `arch/*/lib`.
280
2813.6 Descending down in directories
282----------------------------------
283
284	A Makefile is only responsible for building objects in its own
285	directory. Files in subdirectories should be taken care of by
286	Makefiles in these subdirs. The build system will automatically
287	invoke make recursively in subdirectories, provided you let it know of
288	them.
289
290	To do so, obj-y and obj-m are used.
291	ext2 lives in a separate directory, and the Makefile present in fs/
292	tells kbuild to descend down using the following assignment.
293
294	Example::
295
296		#fs/Makefile
297		obj-$(CONFIG_EXT2_FS) += ext2/
298
299	If CONFIG_EXT2_FS is set to either 'y' (built-in) or 'm' (modular)
300	the corresponding obj- variable will be set, and kbuild will descend
301	down in the ext2 directory.
302
303	Kbuild uses this information not only to decide that it needs to visit
304	the directory, but also to decide whether or not to link objects from
305	the directory into vmlinux.
306
307	When Kbuild descends into the directory with 'y', all built-in objects
308	from that directory are combined into the built-in.a, which will be
309	eventually linked into vmlinux.
310
311	When Kbuild descends into the directory with 'm', in contrast, nothing
312	from that directory will be linked into vmlinux. If the Makefile in
313	that directory specifies obj-y, those objects will be left orphan.
314	It is very likely a bug of the Makefile or of dependencies in Kconfig.
315
316	Kbuild also supports dedicated syntax, subdir-y and subdir-m, for
317	descending into subdirectories. It is a good fit when you know they
318	do not contain kernel-space objects at all. A typical usage is to let
319	Kbuild descend into subdirectories to build tools.
320
321	Examples::
322
323		# scripts/Makefile
324		subdir-$(CONFIG_GCC_PLUGINS) += gcc-plugins
325		subdir-$(CONFIG_MODVERSIONS) += genksyms
326		subdir-$(CONFIG_SECURITY_SELINUX) += selinux
327
328	Unlike obj-y/m, subdir-y/m does not need the trailing slash since this
329	syntax is always used for directories.
330
331	It is good practice to use a `CONFIG_` variable when assigning directory
332	names. This allows kbuild to totally skip the directory if the
333	corresponding `CONFIG_` option is neither 'y' nor 'm'.
334
3353.7 Non-builtin vmlinux targets - extra-y
336-----------------------------------------
337
338	extra-y specifies targets which are needed for building vmlinux,
339	but not combined into built-in.a.
340
341	Examples are:
342
343	1) head objects
344
345	    Some objects must be placed at the head of vmlinux. They are
346	    directly linked to vmlinux without going through built-in.a
347	    A typical use-case is an object that contains the entry point.
348
349	    arch/$(SRCARCH)/Makefile should specify such objects as head-y.
350
351	    Discussion:
352	      Given that we can control the section order in the linker script,
353	      why do we need head-y?
354
355	2) vmlinux linker script
356
357	    The linker script for vmlinux is located at
358	    arch/$(SRCARCH)/kernel/vmlinux.lds
359
360	Example::
361
362		# arch/x86/kernel/Makefile
363		extra-y	:= head_$(BITS).o
364		extra-y	+= head$(BITS).o
365		extra-y	+= ebda.o
366		extra-y	+= platform-quirks.o
367		extra-y	+= vmlinux.lds
368
369	$(extra-y) should only contain targets needed for vmlinux.
370
371	Kbuild skips extra-y when vmlinux is apparently not a final goal.
372	(e.g. 'make modules', or building external modules)
373
374	If you intend to build targets unconditionally, always-y (explained
375	in the next section) is the correct syntax to use.
376
3773.8 Always built goals - always-y
378---------------------------------
379
380	always-y specifies targets which are literally always built when
381	Kbuild visits the Makefile.
382
383	Example::
384	  # ./Kbuild
385	  offsets-file := include/generated/asm-offsets.h
386	  always-y += $(offsets-file)
387
3883.9 Compilation flags
389---------------------
390
391    ccflags-y, asflags-y and ldflags-y
392	These three flags apply only to the kbuild makefile in which they
393	are assigned. They are used for all the normal cc, as and ld
394	invocations happening during a recursive build.
395	Note: Flags with the same behaviour were previously named:
396	EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS.
397	They are still supported but their usage is deprecated.
398
399	ccflags-y specifies options for compiling with $(CC).
400
401	Example::
402
403		# drivers/acpi/acpica/Makefile
404		ccflags-y			:= -Os -D_LINUX -DBUILDING_ACPICA
405		ccflags-$(CONFIG_ACPI_DEBUG)	+= -DACPI_DEBUG_OUTPUT
406
407	This variable is necessary because the top Makefile owns the
408	variable $(KBUILD_CFLAGS) and uses it for compilation flags for the
409	entire tree.
410
411	asflags-y specifies assembler options.
412
413	Example::
414
415		#arch/sparc/kernel/Makefile
416		asflags-y := -ansi
417
418	ldflags-y specifies options for linking with $(LD).
419
420	Example::
421
422		#arch/cris/boot/compressed/Makefile
423		ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
424
425    subdir-ccflags-y, subdir-asflags-y
426	The two flags listed above are similar to ccflags-y and asflags-y.
427	The difference is that the subdir- variants have effect for the kbuild
428	file where they are present and all subdirectories.
429	Options specified using subdir-* are added to the commandline before
430	the options specified using the non-subdir variants.
431
432	Example::
433
434		subdir-ccflags-y := -Werror
435
436    ccflags-remove-y, asflags-remove-y
437	These flags are used to remove particular flags for the compiler,
438	assembler invocations.
439
440	Example::
441
442		ccflags-remove-$(CONFIG_MCOUNT) += -pg
443
444    CFLAGS_$@, AFLAGS_$@
445	CFLAGS_$@ and AFLAGS_$@ only apply to commands in current
446	kbuild makefile.
447
448	$(CFLAGS_$@) specifies per-file options for $(CC).  The $@
449	part has a literal value which specifies the file that it is for.
450
451	CFLAGS_$@ has the higher priority than ccflags-remove-y; CFLAGS_$@
452	can re-add compiler flags that were removed by ccflags-remove-y.
453
454	Example::
455
456		# drivers/scsi/Makefile
457		CFLAGS_aha152x.o =   -DAHA152X_STAT -DAUTOCONF
458
459	This line specify compilation flags for aha152x.o.
460
461	$(AFLAGS_$@) is a similar feature for source files in assembly
462	languages.
463
464	AFLAGS_$@ has the higher priority than asflags-remove-y; AFLAGS_$@
465	can re-add assembler flags that were removed by asflags-remove-y.
466
467	Example::
468
469		# arch/arm/kernel/Makefile
470		AFLAGS_head.o        := -DTEXT_OFFSET=$(TEXT_OFFSET)
471		AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
472		AFLAGS_iwmmxt.o      := -Wa,-mcpu=iwmmxt
473
474
4753.10 Dependency tracking
476------------------------
477
478	Kbuild tracks dependencies on the following:
479
480	1) All prerequisite files (both `*.c` and `*.h`)
481	2) `CONFIG_` options used in all prerequisite files
482	3) Command-line used to compile target
483
484	Thus, if you change an option to $(CC) all affected files will
485	be re-compiled.
486
4873.11 Custom Rules
488-----------------
489
490	Custom rules are used when the kbuild infrastructure does
491	not provide the required support. A typical example is
492	header files generated during the build process.
493	Another example are the architecture-specific Makefiles which
494	need custom rules to prepare boot images etc.
495
496	Custom rules are written as normal Make rules.
497	Kbuild is not executing in the directory where the Makefile is
498	located, so all custom rules shall use a relative
499	path to prerequisite files and target files.
500
501	Two variables are used when defining custom rules:
502
503	$(src)
504	    $(src) is a relative path which points to the directory
505	    where the Makefile is located. Always use $(src) when
506	    referring to files located in the src tree.
507
508	$(obj)
509	    $(obj) is a relative path which points to the directory
510	    where the target is saved. Always use $(obj) when
511	    referring to generated files.
512
513	    Example::
514
515		#drivers/scsi/Makefile
516		$(obj)/53c8xx_d.h: $(src)/53c7,8xx.scr $(src)/script_asm.pl
517			$(CPP) -DCHIP=810 - < $< | ... $(src)/script_asm.pl
518
519	    This is a custom rule, following the normal syntax
520	    required by make.
521
522	    The target file depends on two prerequisite files. References
523	    to the target file are prefixed with $(obj), references
524	    to prerequisites are referenced with $(src) (because they are not
525	    generated files).
526
527	$(kecho)
528	    echoing information to user in a rule is often a good practice
529	    but when execution "make -s" one does not expect to see any output
530	    except for warnings/errors.
531	    To support this kbuild defines $(kecho) which will echo out the
532	    text following $(kecho) to stdout except if "make -s" is used.
533
534	Example::
535
536		# arch/arm/Makefile
537		$(BOOT_TARGETS): vmlinux
538			$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
539			@$(kecho) '  Kernel: $(boot)/$@ is ready'
540
541	When kbuild is executing with KBUILD_VERBOSE=0, then only a shorthand
542	of a command is normally displayed.
543	To enable this behaviour for custom commands kbuild requires
544	two variables to be set::
545
546		quiet_cmd_<command>	- what shall be echoed
547		      cmd_<command>	- the command to execute
548
549	Example::
550
551		# lib/Makefile
552		quiet_cmd_crc32 = GEN     $@
553		      cmd_crc32 = $< > $@
554
555		$(obj)/crc32table.h: $(obj)/gen_crc32table
556			$(call cmd,crc32)
557
558	When updating the $(obj)/crc32table.h target, the line:
559
560		  GEN     lib/crc32table.h
561
562	will be displayed with "make KBUILD_VERBOSE=0".
563
5643.12 Command change detection
565-----------------------------
566
567	When the rule is evaluated, timestamps are compared between the target
568	and its prerequisite files. GNU Make updates the target when any of the
569	prerequisites is newer than that.
570
571	The target should be rebuilt also when the command line has changed
572	since the last invocation. This is not supported by Make itself, so
573	Kbuild achieves this by a kind of meta-programming.
574
575	if_changed is the macro used for this purpose, in the following form::
576
577		quiet_cmd_<command> = ...
578		      cmd_<command> = ...
579
580		<target>: <source(s)> FORCE
581			$(call if_changed,<command>)
582
583	Any target that utilizes if_changed must be listed in $(targets),
584	otherwise the command line check will fail, and the target will
585	always be built.
586
587	If the target is already listed in the recognized syntax such as
588	obj-y/m, lib-y/m, extra-y/m, always-y/m, hostprogs, userprogs, Kbuild
589	automatically adds it to $(targets). Otherwise, the target must be
590	explicitly added to $(targets).
591
592	Assignments to $(targets) are without $(obj)/ prefix. if_changed may be
593	used in conjunction with custom rules as defined in "3.11 Custom Rules".
594
595	Note: It is a typical mistake to forget the FORCE prerequisite.
596	Another common pitfall is that whitespace is sometimes significant; for
597	instance, the below will fail (note the extra space after the comma)::
598
599		target: source(s) FORCE
600
601	**WRONG!**	$(call if_changed, objcopy)
602
603	Note:
604		if_changed should not be used more than once per target.
605		It stores the executed command in a corresponding .cmd
606		file and multiple calls would result in overwrites and
607		unwanted results when the target is up to date and only the
608		tests on changed commands trigger execution of commands.
609
6103.13 $(CC) support functions
611----------------------------
612
613	The kernel may be built with several different versions of
614	$(CC), each supporting a unique set of features and options.
615	kbuild provides basic support to check for valid options for $(CC).
616	$(CC) is usually the gcc compiler, but other alternatives are
617	available.
618
619    as-option
620	as-option is used to check if $(CC) -- when used to compile
621	assembler (`*.S`) files -- supports the given option. An optional
622	second option may be specified if the first option is not supported.
623
624	Example::
625
626		#arch/sh/Makefile
627		cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),)
628
629	In the above example, cflags-y will be assigned the option
630	-Wa$(comma)-isa=$(isa-y) if it is supported by $(CC).
631	The second argument is optional, and if supplied will be used
632	if first argument is not supported.
633
634    as-instr
635	as-instr checks if the assembler reports a specific instruction
636	and then outputs either option1 or option2
637	C escapes are supported in the test instruction
638	Note: as-instr-option uses KBUILD_AFLAGS for assembler options
639
640    cc-option
641	cc-option is used to check if $(CC) supports a given option, and if
642	not supported to use an optional second option.
643
644	Example::
645
646		#arch/x86/Makefile
647		cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586)
648
649	In the above example, cflags-y will be assigned the option
650	-march=pentium-mmx if supported by $(CC), otherwise -march=i586.
651	The second argument to cc-option is optional, and if omitted,
652	cflags-y will be assigned no value if first option is not supported.
653	Note: cc-option uses KBUILD_CFLAGS for $(CC) options
654
655   cc-option-yn
656	cc-option-yn is used to check if gcc supports a given option
657	and return 'y' if supported, otherwise 'n'.
658
659	Example::
660
661		#arch/ppc/Makefile
662		biarch := $(call cc-option-yn, -m32)
663		aflags-$(biarch) += -a32
664		cflags-$(biarch) += -m32
665
666	In the above example, $(biarch) is set to y if $(CC) supports the -m32
667	option. When $(biarch) equals 'y', the expanded variables $(aflags-y)
668	and $(cflags-y) will be assigned the values -a32 and -m32,
669	respectively.
670	Note: cc-option-yn uses KBUILD_CFLAGS for $(CC) options
671
672    cc-disable-warning
673	cc-disable-warning checks if gcc supports a given warning and returns
674	the commandline switch to disable it. This special function is needed,
675	because gcc 4.4 and later accept any unknown -Wno-* option and only
676	warn about it if there is another warning in the source file.
677
678	Example::
679
680		KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
681
682	In the above example, -Wno-unused-but-set-variable will be added to
683	KBUILD_CFLAGS only if gcc really accepts it.
684
685    cc-ifversion
686	cc-ifversion tests the version of $(CC) and equals the fourth parameter
687	if version expression is true, or the fifth (if given) if the version
688	expression is false.
689
690	Example::
691
692		#fs/reiserfs/Makefile
693		ccflags-y := $(call cc-ifversion, -lt, 0402, -O1)
694
695	In this example, ccflags-y will be assigned the value -O1 if the
696	$(CC) version is less than 4.2.
697	cc-ifversion takes all the shell operators:
698	-eq, -ne, -lt, -le, -gt, and -ge
699	The third parameter may be a text as in this example, but it may also
700	be an expanded variable or a macro.
701
702    cc-cross-prefix
703	cc-cross-prefix is used to check if there exists a $(CC) in path with
704	one of the listed prefixes. The first prefix where there exist a
705	prefix$(CC) in the PATH is returned - and if no prefix$(CC) is found
706	then nothing is returned.
707	Additional prefixes are separated by a single space in the
708	call of cc-cross-prefix.
709	This functionality is useful for architecture Makefiles that try
710	to set CROSS_COMPILE to well-known values but may have several
711	values to select between.
712	It is recommended only to try to set CROSS_COMPILE if it is a cross
713	build (host arch is different from target arch). And if CROSS_COMPILE
714	is already set then leave it with the old value.
715
716	Example::
717
718		#arch/m68k/Makefile
719		ifneq ($(SUBARCH),$(ARCH))
720		        ifeq ($(CROSS_COMPILE),)
721		               CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu-)
722			endif
723		endif
724
7253.14 $(LD) support functions
726----------------------------
727
728    ld-option
729	ld-option is used to check if $(LD) supports the supplied option.
730	ld-option takes two options as arguments.
731	The second argument is an optional option that can be used if the
732	first option is not supported by $(LD).
733
734	Example::
735
736		#Makefile
737		LDFLAGS_vmlinux += $(call ld-option, -X)
738
7393.15 Script invocation
740----------------------
741
742	Make rules may invoke scripts to build the kernel. The rules shall
743	always provide the appropriate interpreter to execute the script. They
744	shall not rely on the execute bits being set, and shall not invoke the
745	script directly. For the convenience of manual script invocation, such
746	as invoking ./scripts/checkpatch.pl, it is recommended to set execute
747	bits on the scripts nonetheless.
748
749	Kbuild provides variables $(CONFIG_SHELL), $(AWK), $(PERL),
750	and $(PYTHON3) to refer to interpreters for the respective
751	scripts.
752
753	Example::
754
755		#Makefile
756		cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
757			     $(KERNELRELEASE)
758
7594 Host Program support
760======================
761
762Kbuild supports building executables on the host for use during the
763compilation stage.
764Two steps are required in order to use a host executable.
765
766The first step is to tell kbuild that a host program exists. This is
767done utilising the variable "hostprogs".
768
769The second step is to add an explicit dependency to the executable.
770This can be done in two ways. Either add the dependency in a rule,
771or utilise the variable "always-y".
772Both possibilities are described in the following.
773
7744.1 Simple Host Program
775-----------------------
776
777	In some cases there is a need to compile and run a program on the
778	computer where the build is running.
779	The following line tells kbuild that the program bin2hex shall be
780	built on the build host.
781
782	Example::
783
784		hostprogs := bin2hex
785
786	Kbuild assumes in the above example that bin2hex is made from a single
787	c-source file named bin2hex.c located in the same directory as
788	the Makefile.
789
7904.2 Composite Host Programs
791---------------------------
792
793	Host programs can be made up based on composite objects.
794	The syntax used to define composite objects for host programs is
795	similar to the syntax used for kernel objects.
796	$(<executable>-objs) lists all objects used to link the final
797	executable.
798
799	Example::
800
801		#scripts/lxdialog/Makefile
802		hostprogs     := lxdialog
803		lxdialog-objs := checklist.o lxdialog.o
804
805	Objects with extension .o are compiled from the corresponding .c
806	files. In the above example, checklist.c is compiled to checklist.o
807	and lxdialog.c is compiled to lxdialog.o.
808
809	Finally, the two .o files are linked to the executable, lxdialog.
810	Note: The syntax <executable>-y is not permitted for host-programs.
811
8124.3 Using C++ for host programs
813-------------------------------
814
815	kbuild offers support for host programs written in C++. This was
816	introduced solely to support kconfig, and is not recommended
817	for general use.
818
819	Example::
820
821		#scripts/kconfig/Makefile
822		hostprogs     := qconf
823		qconf-cxxobjs := qconf.o
824
825	In the example above the executable is composed of the C++ file
826	qconf.cc - identified by $(qconf-cxxobjs).
827
828	If qconf is composed of a mixture of .c and .cc files, then an
829	additional line can be used to identify this.
830
831	Example::
832
833		#scripts/kconfig/Makefile
834		hostprogs     := qconf
835		qconf-cxxobjs := qconf.o
836		qconf-objs    := check.o
837
8384.4 Controlling compiler options for host programs
839--------------------------------------------------
840
841	When compiling host programs, it is possible to set specific flags.
842	The programs will always be compiled utilising $(HOSTCC) passed
843	the options specified in $(KBUILD_HOSTCFLAGS).
844	To set flags that will take effect for all host programs created
845	in that Makefile, use the variable HOST_EXTRACFLAGS.
846
847	Example::
848
849		#scripts/lxdialog/Makefile
850		HOST_EXTRACFLAGS += -I/usr/include/ncurses
851
852	To set specific flags for a single file the following construction
853	is used:
854
855	Example::
856
857		#arch/ppc64/boot/Makefile
858		HOSTCFLAGS_piggyback.o := -DKERNELBASE=$(KERNELBASE)
859
860	It is also possible to specify additional options to the linker.
861
862	Example::
863
864		#scripts/kconfig/Makefile
865		HOSTLDLIBS_qconf := -L$(QTDIR)/lib
866
867	When linking qconf, it will be passed the extra option
868	"-L$(QTDIR)/lib".
869
8704.5 When host programs are actually built
871-----------------------------------------
872
873	Kbuild will only build host-programs when they are referenced
874	as a prerequisite.
875	This is possible in two ways:
876
877	(1) List the prerequisite explicitly in a custom rule.
878
879	Example::
880
881		#drivers/pci/Makefile
882		hostprogs := gen-devlist
883		$(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist
884			( cd $(obj); ./gen-devlist ) < $<
885
886	The target $(obj)/devlist.h will not be built before
887	$(obj)/gen-devlist is updated. Note that references to
888	the host programs in custom rules must be prefixed with $(obj).
889
890	(2) Use always-y
891
892	When there is no suitable custom rule, and the host program
893	shall be built when a makefile is entered, the always-y
894	variable shall be used.
895
896	Example::
897
898		#scripts/lxdialog/Makefile
899		hostprogs     := lxdialog
900		always-y      := $(hostprogs)
901
902	Kbuild provides the following shorthand for this:
903
904		hostprogs-always-y := lxdialog
905
906	This will tell kbuild to build lxdialog even if not referenced in
907	any rule.
908
9095 Userspace Program support
910===========================
911
912Just like host programs, Kbuild also supports building userspace executables
913for the target architecture (i.e. the same architecture as you are building
914the kernel for).
915
916The syntax is quite similar. The difference is to use "userprogs" instead of
917"hostprogs".
918
9195.1 Simple Userspace Program
920----------------------------
921
922	The following line tells kbuild that the program bpf-direct shall be
923	built for the target architecture.
924
925	Example::
926
927		userprogs := bpf-direct
928
929	Kbuild assumes in the above example that bpf-direct is made from a
930	single C source file named bpf-direct.c located in the same directory
931	as the Makefile.
932
9335.2 Composite Userspace Programs
934--------------------------------
935
936	Userspace programs can be made up based on composite objects.
937	The syntax used to define composite objects for userspace programs is
938	similar to the syntax used for kernel objects.
939	$(<executable>-objs) lists all objects used to link the final
940	executable.
941
942	Example::
943
944		#samples/seccomp/Makefile
945		userprogs      := bpf-fancy
946		bpf-fancy-objs := bpf-fancy.o bpf-helper.o
947
948	Objects with extension .o are compiled from the corresponding .c
949	files. In the above example, bpf-fancy.c is compiled to bpf-fancy.o
950	and bpf-helper.c is compiled to bpf-helper.o.
951
952	Finally, the two .o files are linked to the executable, bpf-fancy.
953	Note: The syntax <executable>-y is not permitted for userspace programs.
954
9555.3 Controlling compiler options for userspace programs
956-------------------------------------------------------
957
958	When compiling userspace programs, it is possible to set specific flags.
959	The programs will always be compiled utilising $(CC) passed
960	the options specified in $(KBUILD_USERCFLAGS).
961	To set flags that will take effect for all userspace programs created
962	in that Makefile, use the variable userccflags.
963
964	Example::
965
966		# samples/seccomp/Makefile
967		userccflags += -I usr/include
968
969	To set specific flags for a single file the following construction
970	is used:
971
972	Example::
973
974		bpf-helper-userccflags += -I user/include
975
976	It is also possible to specify additional options to the linker.
977
978	Example::
979
980		# net/bpfilter/Makefile
981		bpfilter_umh-userldflags += -static
982
983	When linking bpfilter_umh, it will be passed the extra option -static.
984
985	From command line, :ref:`USERCFLAGS and USERLDFLAGS <userkbuildflags>` will also be used.
986
9875.4 When userspace programs are actually built
988----------------------------------------------
989
990	Kbuild builds userspace programs only when told to do so.
991	There are two ways to do this.
992
993	(1) Add it as the prerequisite of another file
994
995	Example::
996
997		#net/bpfilter/Makefile
998		userprogs := bpfilter_umh
999		$(obj)/bpfilter_umh_blob.o: $(obj)/bpfilter_umh
1000
1001	$(obj)/bpfilter_umh is built before $(obj)/bpfilter_umh_blob.o
1002
1003	(2) Use always-y
1004
1005	Example::
1006
1007		userprogs := binderfs_example
1008		always-y := $(userprogs)
1009
1010	Kbuild provides the following shorthand for this:
1011
1012		userprogs-always-y := binderfs_example
1013
1014	This will tell Kbuild to build binderfs_example when it visits this
1015	Makefile.
1016
10176 Kbuild clean infrastructure
1018=============================
1019
1020"make clean" deletes most generated files in the obj tree where the kernel
1021is compiled. This includes generated files such as host programs.
1022Kbuild knows targets listed in $(hostprogs), $(always-y), $(always-m),
1023$(always-), $(extra-y), $(extra-) and $(targets). They are all deleted
1024during "make clean". Files matching the patterns "*.[oas]", "*.ko", plus
1025some additional files generated by kbuild are deleted all over the kernel
1026source tree when "make clean" is executed.
1027
1028Additional files or directories can be specified in kbuild makefiles by use of
1029$(clean-files).
1030
1031	Example::
1032
1033		#lib/Makefile
1034		clean-files := crc32table.h
1035
1036When executing "make clean", the file "crc32table.h" will be deleted.
1037Kbuild will assume files to be in the same relative directory as the
1038Makefile, except if prefixed with $(objtree).
1039
1040To exclude certain files or directories from make clean, use the
1041$(no-clean-files) variable.
1042
1043Usually kbuild descends down in subdirectories due to "obj-* := dir/",
1044but in the architecture makefiles where the kbuild infrastructure
1045is not sufficient this sometimes needs to be explicit.
1046
1047	Example::
1048
1049		#arch/x86/boot/Makefile
1050		subdir- := compressed
1051
1052The above assignment instructs kbuild to descend down in the
1053directory compressed/ when "make clean" is executed.
1054
1055Note 1: arch/$(SRCARCH)/Makefile cannot use "subdir-", because that file is
1056included in the top level makefile. Instead, arch/$(SRCARCH)/Kbuild can use
1057"subdir-".
1058
1059Note 2: All directories listed in core-y, libs-y, drivers-y and net-y will
1060be visited during "make clean".
1061
10627 Architecture Makefiles
1063========================
1064
1065The top level Makefile sets up the environment and does the preparation,
1066before starting to descend down in the individual directories.
1067The top level makefile contains the generic part, whereas
1068arch/$(SRCARCH)/Makefile contains what is required to set up kbuild
1069for said architecture.
1070To do so, arch/$(SRCARCH)/Makefile sets up a number of variables and defines
1071a few targets.
1072
1073When kbuild executes, the following steps are followed (roughly):
1074
10751) Configuration of the kernel => produce .config
10762) Store kernel version in include/linux/version.h
10773) Updating all other prerequisites to the target prepare:
1078   - Additional prerequisites are specified in arch/$(SRCARCH)/Makefile
10794) Recursively descend down in all directories listed in
1080   init-* core* drivers-* net-* libs-* and build all targets.
1081   - The values of the above variables are expanded in arch/$(SRCARCH)/Makefile.
10825) All object files are then linked and the resulting file vmlinux is
1083   located at the root of the obj tree.
1084   The very first objects linked are listed in head-y, assigned by
1085   arch/$(SRCARCH)/Makefile.
10866) Finally, the architecture-specific part does any required post processing
1087   and builds the final bootimage.
1088   - This includes building boot records
1089   - Preparing initrd images and the like
1090
1091
10927.1 Set variables to tweak the build to the architecture
1093--------------------------------------------------------
1094
1095    KBUILD_LDFLAGS
1096	Generic $(LD) options
1097
1098	Flags used for all invocations of the linker.
1099	Often specifying the emulation is sufficient.
1100
1101	Example::
1102
1103		#arch/s390/Makefile
1104		KBUILD_LDFLAGS         := -m elf_s390
1105
1106	Note: ldflags-y can be used to further customise
1107	the flags used. See section 3.7.
1108
1109    LDFLAGS_vmlinux
1110	Options for $(LD) when linking vmlinux
1111
1112	LDFLAGS_vmlinux is used to specify additional flags to pass to
1113	the linker when linking the final vmlinux image.
1114	LDFLAGS_vmlinux uses the LDFLAGS_$@ support.
1115
1116	Example::
1117
1118		#arch/x86/Makefile
1119		LDFLAGS_vmlinux := -e stext
1120
1121    OBJCOPYFLAGS
1122	objcopy flags
1123
1124	When $(call if_changed,objcopy) is used to translate a .o file,
1125	the flags specified in OBJCOPYFLAGS will be used.
1126	$(call if_changed,objcopy) is often used to generate raw binaries on
1127	vmlinux.
1128
1129	Example::
1130
1131		#arch/s390/Makefile
1132		OBJCOPYFLAGS := -O binary
1133
1134		#arch/s390/boot/Makefile
1135		$(obj)/image: vmlinux FORCE
1136			$(call if_changed,objcopy)
1137
1138	In this example, the binary $(obj)/image is a binary version of
1139	vmlinux. The usage of $(call if_changed,xxx) will be described later.
1140
1141    KBUILD_AFLAGS
1142	Assembler flags
1143
1144	Default value - see top level Makefile
1145	Append or modify as required per architecture.
1146
1147	Example::
1148
1149		#arch/sparc64/Makefile
1150		KBUILD_AFLAGS += -m64 -mcpu=ultrasparc
1151
1152    KBUILD_CFLAGS
1153	$(CC) compiler flags
1154
1155	Default value - see top level Makefile
1156	Append or modify as required per architecture.
1157
1158	Often, the KBUILD_CFLAGS variable depends on the configuration.
1159
1160	Example::
1161
1162		#arch/x86/boot/compressed/Makefile
1163		cflags-$(CONFIG_X86_32) := -march=i386
1164		cflags-$(CONFIG_X86_64) := -mcmodel=small
1165		KBUILD_CFLAGS += $(cflags-y)
1166
1167	Many arch Makefiles dynamically run the target C compiler to
1168	probe supported options::
1169
1170		#arch/x86/Makefile
1171
1172		...
1173		cflags-$(CONFIG_MPENTIUMII)     += $(call cc-option,\
1174						-march=pentium2,-march=i686)
1175		...
1176		# Disable unit-at-a-time mode ...
1177		KBUILD_CFLAGS += $(call cc-option,-fno-unit-at-a-time)
1178		...
1179
1180
1181	The first example utilises the trick that a config option expands
1182	to 'y' when selected.
1183
1184    KBUILD_AFLAGS_KERNEL
1185	Assembler options specific for built-in
1186
1187	$(KBUILD_AFLAGS_KERNEL) contains extra C compiler flags used to compile
1188	resident kernel code.
1189
1190    KBUILD_AFLAGS_MODULE
1191	Assembler options specific for modules
1192
1193	$(KBUILD_AFLAGS_MODULE) is used to add arch-specific options that
1194	are used for assembler.
1195
1196	From commandline AFLAGS_MODULE shall be used (see kbuild.rst).
1197
1198    KBUILD_CFLAGS_KERNEL
1199	$(CC) options specific for built-in
1200
1201	$(KBUILD_CFLAGS_KERNEL) contains extra C compiler flags used to compile
1202	resident kernel code.
1203
1204    KBUILD_CFLAGS_MODULE
1205	Options for $(CC) when building modules
1206
1207	$(KBUILD_CFLAGS_MODULE) is used to add arch-specific options that
1208	are used for $(CC).
1209	From commandline CFLAGS_MODULE shall be used (see kbuild.rst).
1210
1211    KBUILD_LDFLAGS_MODULE
1212	Options for $(LD) when linking modules
1213
1214	$(KBUILD_LDFLAGS_MODULE) is used to add arch-specific options
1215	used when linking modules. This is often a linker script.
1216
1217	From commandline LDFLAGS_MODULE shall be used (see kbuild.rst).
1218
1219    KBUILD_LDS
1220
1221	The linker script with full path. Assigned by the top-level Makefile.
1222
1223    KBUILD_LDS_MODULE
1224
1225	The module linker script with full path. Assigned by the top-level
1226	Makefile and additionally by the arch Makefile.
1227
1228    KBUILD_VMLINUX_OBJS
1229
1230	All object files for vmlinux. They are linked to vmlinux in the same
1231	order as listed in KBUILD_VMLINUX_OBJS.
1232
1233    KBUILD_VMLINUX_LIBS
1234
1235	All .a "lib" files for vmlinux. KBUILD_VMLINUX_OBJS and
1236	KBUILD_VMLINUX_LIBS together specify all the object files used to
1237	link vmlinux.
1238
12397.2 Add prerequisites to archheaders
1240------------------------------------
1241
1242	The archheaders: rule is used to generate header files that
1243	may be installed into user space by "make header_install".
1244
1245	It is run before "make archprepare" when run on the
1246	architecture itself.
1247
1248
12497.3 Add prerequisites to archprepare
1250------------------------------------
1251
1252	The archprepare: rule is used to list prerequisites that need to be
1253	built before starting to descend down in the subdirectories.
1254	This is usually used for header files containing assembler constants.
1255
1256	Example::
1257
1258		#arch/arm/Makefile
1259		archprepare: maketools
1260
1261	In this example, the file target maketools will be processed
1262	before descending down in the subdirectories.
1263	See also chapter XXX-TODO that describes how kbuild supports
1264	generating offset header files.
1265
1266
12677.4 List directories to visit when descending
1268---------------------------------------------
1269
1270	An arch Makefile cooperates with the top Makefile to define variables
1271	which specify how to build the vmlinux file.  Note that there is no
1272	corresponding arch-specific section for modules; the module-building
1273	machinery is all architecture-independent.
1274
1275
1276	head-y, core-y, libs-y, drivers-y
1277	    $(head-y) lists objects to be linked first in vmlinux.
1278
1279	    $(libs-y) lists directories where a lib.a archive can be located.
1280
1281	    The rest list directories where a built-in.a object file can be
1282	    located.
1283
1284	    Then the rest follows in this order:
1285
1286		$(core-y), $(libs-y), $(drivers-y)
1287
1288	    The top level Makefile defines values for all generic directories,
1289	    and arch/$(SRCARCH)/Makefile only adds architecture-specific
1290	    directories.
1291
1292	    Example::
1293
1294		# arch/sparc/Makefile
1295		core-y                 += arch/sparc/
1296
1297		libs-y                 += arch/sparc/prom/
1298		libs-y                 += arch/sparc/lib/
1299
1300		drivers-$(CONFIG_PM) += arch/sparc/power/
1301
13027.5 Architecture-specific boot images
1303-------------------------------------
1304
1305	An arch Makefile specifies goals that take the vmlinux file, compress
1306	it, wrap it in bootstrapping code, and copy the resulting files
1307	somewhere. This includes various kinds of installation commands.
1308	The actual goals are not standardized across architectures.
1309
1310	It is common to locate any additional processing in a boot/
1311	directory below arch/$(SRCARCH)/.
1312
1313	Kbuild does not provide any smart way to support building a
1314	target specified in boot/. Therefore arch/$(SRCARCH)/Makefile shall
1315	call make manually to build a target in boot/.
1316
1317	The recommended approach is to include shortcuts in
1318	arch/$(SRCARCH)/Makefile, and use the full path when calling down
1319	into the arch/$(SRCARCH)/boot/Makefile.
1320
1321	Example::
1322
1323		#arch/x86/Makefile
1324		boot := arch/x86/boot
1325		bzImage: vmlinux
1326			$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
1327
1328	"$(Q)$(MAKE) $(build)=<dir>" is the recommended way to invoke
1329	make in a subdirectory.
1330
1331	There are no rules for naming architecture-specific targets,
1332	but executing "make help" will list all relevant targets.
1333	To support this, $(archhelp) must be defined.
1334
1335	Example::
1336
1337		#arch/x86/Makefile
1338		define archhelp
1339		  echo  '* bzImage      - Compressed kernel image (arch/x86/boot/bzImage)'
1340		endif
1341
1342	When make is executed without arguments, the first goal encountered
1343	will be built. In the top level Makefile the first goal present
1344	is all:.
1345	An architecture shall always, per default, build a bootable image.
1346	In "make help", the default goal is highlighted with a '*'.
1347	Add a new prerequisite to all: to select a default goal different
1348	from vmlinux.
1349
1350	Example::
1351
1352		#arch/x86/Makefile
1353		all: bzImage
1354
1355	When "make" is executed without arguments, bzImage will be built.
1356
13577.7 Commands useful for building a boot image
1358---------------------------------------------
1359
1360    Kbuild provides a few macros that are useful when building a
1361    boot image.
1362
1363    ld
1364	Link target. Often, LDFLAGS_$@ is used to set specific options to ld.
1365
1366	Example::
1367
1368		#arch/x86/boot/Makefile
1369		LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
1370		LDFLAGS_setup    := -Ttext 0x0 -s --oformat binary -e begtext
1371
1372		targets += setup setup.o bootsect bootsect.o
1373		$(obj)/setup $(obj)/bootsect: %: %.o FORCE
1374			$(call if_changed,ld)
1375
1376	In this example, there are two possible targets, requiring different
1377	options to the linker. The linker options are specified using the
1378	LDFLAGS_$@ syntax - one for each potential target.
1379	$(targets) are assigned all potential targets, by which kbuild knows
1380	the targets and will:
1381
1382		1) check for commandline changes
1383		2) delete target during make clean
1384
1385	The ": %: %.o" part of the prerequisite is a shorthand that
1386	frees us from listing the setup.o and bootsect.o files.
1387
1388	Note:
1389	      It is a common mistake to forget the "targets :=" assignment,
1390	      resulting in the target file being recompiled for no
1391	      obvious reason.
1392
1393    objcopy
1394	Copy binary. Uses OBJCOPYFLAGS usually specified in
1395	arch/$(SRCARCH)/Makefile.
1396	OBJCOPYFLAGS_$@ may be used to set additional options.
1397
1398    gzip
1399	Compress target. Use maximum compression to compress target.
1400
1401	Example::
1402
1403		#arch/x86/boot/compressed/Makefile
1404		$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
1405			$(call if_changed,gzip)
1406
1407    dtc
1408	Create flattened device tree blob object suitable for linking
1409	into vmlinux. Device tree blobs linked into vmlinux are placed
1410	in an init section in the image. Platform code *must* copy the
1411	blob to non-init memory prior to calling unflatten_device_tree().
1412
1413	To use this command, simply add `*.dtb` into obj-y or targets, or make
1414	some other target depend on `%.dtb`
1415
1416	A central rule exists to create `$(obj)/%.dtb` from `$(src)/%.dts`;
1417	architecture Makefiles do no need to explicitly write out that rule.
1418
1419	Example::
1420
1421		targets += $(dtb-y)
1422		DTC_FLAGS ?= -p 1024
1423
14247.9 Preprocessing linker scripts
1425--------------------------------
1426
1427	When the vmlinux image is built, the linker script
1428	arch/$(SRCARCH)/kernel/vmlinux.lds is used.
1429	The script is a preprocessed variant of the file vmlinux.lds.S
1430	located in the same directory.
1431	kbuild knows .lds files and includes a rule `*lds.S` -> `*lds`.
1432
1433	Example::
1434
1435		#arch/x86/kernel/Makefile
1436		extra-y := vmlinux.lds
1437
1438	The assignment to extra-y is used to tell kbuild to build the
1439	target vmlinux.lds.
1440	The assignment to $(CPPFLAGS_vmlinux.lds) tells kbuild to use the
1441	specified options when building the target vmlinux.lds.
1442
1443	When building the `*.lds` target, kbuild uses the variables::
1444
1445		KBUILD_CPPFLAGS	: Set in top-level Makefile
1446		cppflags-y	: May be set in the kbuild makefile
1447		CPPFLAGS_$(@F)  : Target-specific flags.
1448				Note that the full filename is used in this
1449				assignment.
1450
1451	The kbuild infrastructure for `*lds` files is used in several
1452	architecture-specific files.
1453
14547.10 Generic header files
1455-------------------------
1456
1457	The directory include/asm-generic contains the header files
1458	that may be shared between individual architectures.
1459	The recommended approach how to use a generic header file is
1460	to list the file in the Kbuild file.
1461	See "8.2 generic-y" for further info on syntax etc.
1462
14637.11 Post-link pass
1464-------------------
1465
1466	If the file arch/xxx/Makefile.postlink exists, this makefile
1467	will be invoked for post-link objects (vmlinux and modules.ko)
1468	for architectures to run post-link passes on. Must also handle
1469	the clean target.
1470
1471	This pass runs after kallsyms generation. If the architecture
1472	needs to modify symbol locations, rather than manipulate the
1473	kallsyms, it may be easier to add another postlink target for
1474	.tmp_vmlinux? targets to be called from link-vmlinux.sh.
1475
1476	For example, powerpc uses this to check relocation sanity of
1477	the linked vmlinux file.
1478
14798 Kbuild syntax for exported headers
1480------------------------------------
1481
1482The kernel includes a set of headers that is exported to userspace.
1483Many headers can be exported as-is but other headers require a
1484minimal pre-processing before they are ready for user-space.
1485The pre-processing does:
1486
1487- drop kernel-specific annotations
1488- drop include of compiler.h
1489- drop all sections that are kernel internal (guarded by `ifdef __KERNEL__`)
1490
1491All headers under include/uapi/, include/generated/uapi/,
1492arch/<arch>/include/uapi/ and arch/<arch>/include/generated/uapi/
1493are exported.
1494
1495A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
1496arch/<arch>/include/asm/ to list asm files coming from asm-generic.
1497See subsequent chapter for the syntax of the Kbuild file.
1498
14998.1 no-export-headers
1500---------------------
1501
1502	no-export-headers is essentially used by include/uapi/linux/Kbuild to
1503	avoid exporting specific headers (e.g. kvm.h) on architectures that do
1504	not support it. It should be avoided as much as possible.
1505
15068.2 generic-y
1507-------------
1508
1509	If an architecture uses a verbatim copy of a header from
1510	include/asm-generic then this is listed in the file
1511	arch/$(SRCARCH)/include/asm/Kbuild like this:
1512
1513		Example::
1514
1515			#arch/x86/include/asm/Kbuild
1516			generic-y += termios.h
1517			generic-y += rtc.h
1518
1519	During the prepare phase of the build a wrapper include
1520	file is generated in the directory::
1521
1522		arch/$(SRCARCH)/include/generated/asm
1523
1524	When a header is exported where the architecture uses
1525	the generic header a similar wrapper is generated as part
1526	of the set of exported headers in the directory::
1527
1528		usr/include/asm
1529
1530	The generated wrapper will in both cases look like the following:
1531
1532		Example: termios.h::
1533
1534			#include <asm-generic/termios.h>
1535
15368.3 generated-y
1537---------------
1538
1539	If an architecture generates other header files alongside generic-y
1540	wrappers, generated-y specifies them.
1541
1542	This prevents them being treated as stale asm-generic wrappers and
1543	removed.
1544
1545		Example::
1546
1547			#arch/x86/include/asm/Kbuild
1548			generated-y += syscalls_32.h
1549
15508.4 mandatory-y
1551---------------
1552
1553	mandatory-y is essentially used by include/(uapi/)asm-generic/Kbuild
1554	to define the minimum set of ASM headers that all architectures must have.
1555
1556	This works like optional generic-y. If a mandatory header is missing
1557	in arch/$(SRCARCH)/include/(uapi/)/asm, Kbuild will automatically
1558	generate a wrapper of the asm-generic one.
1559
15609 Kbuild Variables
1561==================
1562
1563The top Makefile exports the following variables:
1564
1565    VERSION, PATCHLEVEL, SUBLEVEL, EXTRAVERSION
1566	These variables define the current kernel version.  A few arch
1567	Makefiles actually use these values directly; they should use
1568	$(KERNELRELEASE) instead.
1569
1570	$(VERSION), $(PATCHLEVEL), and $(SUBLEVEL) define the basic
1571	three-part version number, such as "2", "4", and "0".  These three
1572	values are always numeric.
1573
1574	$(EXTRAVERSION) defines an even tinier sublevel for pre-patches
1575	or additional patches.	It is usually some non-numeric string
1576	such as "-pre4", and is often blank.
1577
1578    KERNELRELEASE
1579	$(KERNELRELEASE) is a single string such as "2.4.0-pre4", suitable
1580	for constructing installation directory names or showing in
1581	version strings.  Some arch Makefiles use it for this purpose.
1582
1583    ARCH
1584	This variable defines the target architecture, such as "i386",
1585	"arm", or "sparc". Some kbuild Makefiles test $(ARCH) to
1586	determine which files to compile.
1587
1588	By default, the top Makefile sets $(ARCH) to be the same as the
1589	host system architecture.  For a cross build, a user may
1590	override the value of $(ARCH) on the command line::
1591
1592	    make ARCH=m68k ...
1593
1594    SRCARCH
1595	This variable specifies the directory in arch/ to build.
1596
1597	ARCH and SRCARCH may not necessarily match. A couple of arch
1598	directories are biarch, that is, a single `arch/*/` directory supports
1599	both 32-bit and 64-bit.
1600
1601	For example, you can pass in ARCH=i386, ARCH=x86_64, or ARCH=x86.
1602	For all of them, SRCARCH=x86 because arch/x86/ supports	both i386 and
1603	x86_64.
1604
1605    INSTALL_PATH
1606	This variable defines a place for the arch Makefiles to install
1607	the resident kernel image and System.map file.
1608	Use this for architecture-specific install targets.
1609
1610    INSTALL_MOD_PATH, MODLIB
1611	$(INSTALL_MOD_PATH) specifies a prefix to $(MODLIB) for module
1612	installation.  This variable is not defined in the Makefile but
1613	may be passed in by the user if desired.
1614
1615	$(MODLIB) specifies the directory for module installation.
1616	The top Makefile defines $(MODLIB) to
1617	$(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE).  The user may
1618	override this value on the command line if desired.
1619
1620    INSTALL_MOD_STRIP
1621	If this variable is specified, it will cause modules to be stripped
1622	after they are installed.  If INSTALL_MOD_STRIP is '1', then the
1623	default option --strip-debug will be used.  Otherwise, the
1624	INSTALL_MOD_STRIP value will be used as the option(s) to the strip
1625	command.
1626
1627
162810 Makefile language
1629====================
1630
1631The kernel Makefiles are designed to be run with GNU Make.  The Makefiles
1632use only the documented features of GNU Make, but they do use many
1633GNU extensions.
1634
1635GNU Make supports elementary list-processing functions.  The kernel
1636Makefiles use a novel style of list building and manipulation with few
1637"if" statements.
1638
1639GNU Make has two assignment operators, ":=" and "=".  ":=" performs
1640immediate evaluation of the right-hand side and stores an actual string
1641into the left-hand side.  "=" is like a formula definition; it stores the
1642right-hand side in an unevaluated form and then evaluates this form each
1643time the left-hand side is used.
1644
1645There are some cases where "=" is appropriate.  Usually, though, ":="
1646is the right choice.
1647
164811 Credits
1649==========
1650
1651- Original version made by Michael Elizabeth Chastain, <mailto:mec@shout.net>
1652- Updates by Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
1653- Updates by Sam Ravnborg <sam@ravnborg.org>
1654- Language QA by Jan Engelhardt <jengelh@gmx.de>
1655
165612 TODO
1657=======
1658
1659- Describe how kbuild supports shipped files with _shipped.
1660- Generating offset header files.
1661- Add more variables to chapters 7 or 9?
1662