1Kernel driver powr1220
2======================
3
4Supported chips:
5
6  * Lattice POWR1220AT8
7
8    Prefix: 'powr1220'
9
10    Addresses scanned: none
11
12    Datasheet: Publicly available at the Lattice website
13
14	       http://www.latticesemi.com/
15
16Author: Scott Kanowitz <scott.kanowitz@gmail.com>
17
18Description
19-----------
20
21This driver supports the Lattice POWR1220AT8 chip. The POWR1220
22includes voltage monitoring for 14 inputs as well as trim settings
23for output voltages and GPIOs. This driver implements the voltage
24monitoring portion of the chip.
25
26Voltages are sampled by a 12-bit ADC with a step size of 2 mV.
27An in-line attenuator allows measurements from 0 to 6 V. The
28attenuator is enabled or disabled depending on the setting of the
29input's max value. The driver will enable the attenuator for any
30value over the low measurement range maximum of 2 V.
31
32The input naming convention is as follows:
33
34============== ========
35driver name    pin name
36============== ========
37in0            VMON1
38in1            VMON2
39in2            VMON3
40in2            VMON4
41in4            VMON5
42in5            VMON6
43in6            VMON7
44in7            VMON8
45in8            VMON9
46in9            VMON10
47in10           VMON11
48in11           VMON12
49in12           VCCA
50in13           VCCINP
51============== ========
52
53The ADC readings are updated on request with a minimum period of 1s.
54