1.. SPDX-License-Identifier: GPL-2.0
2
3Kernel driver bpa-rs600
4=======================
5
6Supported chips:
7
8  * BPA-RS600-120
9
10    Datasheet: Publicly available at the BluTek website
11       http://blutekpower.com/wp-content/uploads/2019/01/BPA-RS600-120-07-19-2018.pdf
12
13Authors:
14      - Chris Packham <chris.packham@alliedtelesis.co.nz>
15
16Description
17-----------
18
19The BPA-RS600 is a compact 600W removable power supply module.
20
21Usage Notes
22-----------
23
24This driver does not probe for PMBus devices. You will have to instantiate
25devices explicitly.
26
27Sysfs attributes
28----------------
29
30======================= ============================================
31curr1_label             "iin"
32curr1_input		Measured input current
33curr1_max		Maximum input current
34curr1_max_alarm		Input current high alarm
35
36curr2_label		"iout1"
37curr2_input		Measured output current
38curr2_max		Maximum output current
39curr2_max_alarm		Output current high alarm
40
41fan1_input		Measured fan speed
42fan1_alarm		Fan warning
43fan1_fault		Fan fault
44
45in1_label		"vin"
46in1_input		Measured input voltage
47in1_max			Maximum input voltage
48in1_max_alarm		Input voltage high alarm
49in1_min			Minimum input voltage
50in1_min_alarm		Input voltage low alarm
51
52in2_label		"vout1"
53in2_input		Measured output voltage
54in2_max			Maximum output voltage
55in2_max_alarm		Output voltage high alarm
56in2_min			Maximum output voltage
57in2_min_alarm		Output voltage low alarm
58
59power1_label		"pin"
60power1_input		Measured input power
61power1_alarm		Input power alarm
62power1_max		Maximum input power
63
64power2_label		"pout1"
65power2_input		Measured output power
66power2_max		Maximum output power
67power2_max_alarm	Output power high alarm
68
69temp1_input		Measured temperature around input connector
70temp1_alarm		Temperature alarm
71
72temp2_input		Measured temperature around output connector
73temp2_alarm		Temperature alarm
74======================= ============================================
75