1.. SPDX-License-Identifier: GPL-2.0 2 3.. UBIFS Authentication 4.. sigma star gmbh 5.. 2018 6 7============================ 8UBIFS Authentication Support 9============================ 10 11Introduction 12============ 13 14UBIFS utilizes the fscrypt framework to provide confidentiality for file 15contents and file names. This prevents attacks where an attacker is able to 16read contents of the filesystem on a single point in time. A classic example 17is a lost smartphone where the attacker is unable to read personal data stored 18on the device without the filesystem decryption key. 19 20At the current state, UBIFS encryption however does not prevent attacks where 21the attacker is able to modify the filesystem contents and the user uses the 22device afterwards. In such a scenario an attacker can modify filesystem 23contents arbitrarily without the user noticing. One example is to modify a 24binary to perform a malicious action when executed [DMC-CBC-ATTACK]. Since 25most of the filesystem metadata of UBIFS is stored in plain, this makes it 26fairly easy to swap files and replace their contents. 27 28Other full disk encryption systems like dm-crypt cover all filesystem metadata, 29which makes such kinds of attacks more complicated, but not impossible. 30Especially, if the attacker is given access to the device multiple points in 31time. For dm-crypt and other filesystems that build upon the Linux block IO 32layer, the dm-integrity or dm-verity subsystems [DM-INTEGRITY, DM-VERITY] 33can be used to get full data authentication at the block layer. 34These can also be combined with dm-crypt [CRYPTSETUP2]. 35 36This document describes an approach to get file contents _and_ full metadata 37authentication for UBIFS. Since UBIFS uses fscrypt for file contents and file 38name encryption, the authentication system could be tied into fscrypt such that 39existing features like key derivation can be utilized. It should however also 40be possible to use UBIFS authentication without using encryption. 41 42 43MTD, UBI & UBIFS 44---------------- 45 46On Linux, the MTD (Memory Technology Devices) subsystem provides a uniform 47interface to access raw flash devices. One of the more prominent subsystems that 48work on top of MTD is UBI (Unsorted Block Images). It provides volume management 49for flash devices and is thus somewhat similar to LVM for block devices. In 50addition, it deals with flash-specific wear-leveling and transparent I/O error 51handling. UBI offers logical erase blocks (LEBs) to the layers on top of it 52and maps them transparently to physical erase blocks (PEBs) on the flash. 53 54UBIFS is a filesystem for raw flash which operates on top of UBI. Thus, wear 55leveling and some flash specifics are left to UBI, while UBIFS focuses on 56scalability, performance and recoverability. 57 58:: 59 60 +------------+ +*******+ +-----------+ +-----+ 61 | | * UBIFS * | UBI-BLOCK | | ... | 62 | JFFS/JFFS2 | +*******+ +-----------+ +-----+ 63 | | +-----------------------------+ +-----------+ +-----+ 64 | | | UBI | | MTD-BLOCK | | ... | 65 +------------+ +-----------------------------+ +-----------+ +-----+ 66 +------------------------------------------------------------------+ 67 | MEMORY TECHNOLOGY DEVICES (MTD) | 68 +------------------------------------------------------------------+ 69 +-----------------------------+ +--------------------------+ +-----+ 70 | NAND DRIVERS | | NOR DRIVERS | | ... | 71 +-----------------------------+ +--------------------------+ +-----+ 72 73 Figure 1: Linux kernel subsystems for dealing with raw flash 74 75 76 77Internally, UBIFS maintains multiple data structures which are persisted on 78the flash: 79 80- *Index*: an on-flash B+ tree where the leaf nodes contain filesystem data 81- *Journal*: an additional data structure to collect FS changes before updating 82 the on-flash index and reduce flash wear. 83- *Tree Node Cache (TNC)*: an in-memory B+ tree that reflects the current FS 84 state to avoid frequent flash reads. It is basically the in-memory 85 representation of the index, but contains additional attributes. 86- *LEB property tree (LPT)*: an on-flash B+ tree for free space accounting per 87 UBI LEB. 88 89In the remainder of this section we will cover the on-flash UBIFS data 90structures in more detail. The TNC is of less importance here since it is never 91persisted onto the flash directly. More details on UBIFS can also be found in 92[UBIFS-WP]. 93 94 95UBIFS Index & Tree Node Cache 96~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 97 98Basic on-flash UBIFS entities are called *nodes*. UBIFS knows different types 99of nodes. Eg. data nodes (``struct ubifs_data_node``) which store chunks of file 100contents or inode nodes (``struct ubifs_ino_node``) which represent VFS inodes. 101Almost all types of nodes share a common header (``ubifs_ch``) containing basic 102information like node type, node length, a sequence number, etc. (see 103``fs/ubifs/ubifs-media.h`` in kernel source). Exceptions are entries of the LPT 104and some less important node types like padding nodes which are used to pad 105unusable content at the end of LEBs. 106 107To avoid re-writing the whole B+ tree on every single change, it is implemented 108as *wandering tree*, where only the changed nodes are re-written and previous 109versions of them are obsoleted without erasing them right away. As a result, 110the index is not stored in a single place on the flash, but *wanders* around 111and there are obsolete parts on the flash as long as the LEB containing them is 112not reused by UBIFS. To find the most recent version of the index, UBIFS stores 113a special node called *master node* into UBI LEB 1 which always points to the 114most recent root node of the UBIFS index. For recoverability, the master node 115is additionally duplicated to LEB 2. Mounting UBIFS is thus a simple read of 116LEB 1 and 2 to get the current master node and from there get the location of 117the most recent on-flash index. 118 119The TNC is the in-memory representation of the on-flash index. It contains some 120additional runtime attributes per node which are not persisted. One of these is 121a dirty-flag which marks nodes that have to be persisted the next time the 122index is written onto the flash. The TNC acts as a write-back cache and all 123modifications of the on-flash index are done through the TNC. Like other caches, 124the TNC does not have to mirror the full index into memory, but reads parts of 125it from flash whenever needed. A *commit* is the UBIFS operation of updating the 126on-flash filesystem structures like the index. On every commit, the TNC nodes 127marked as dirty are written to the flash to update the persisted index. 128 129 130Journal 131~~~~~~~ 132 133To avoid wearing out the flash, the index is only persisted (*commited*) when 134certain conditions are met (eg. ``fsync(2)``). The journal is used to record 135any changes (in form of inode nodes, data nodes etc.) between commits 136of the index. During mount, the journal is read from the flash and replayed 137onto the TNC (which will be created on-demand from the on-flash index). 138 139UBIFS reserves a bunch of LEBs just for the journal called *log area*. The 140amount of log area LEBs is configured on filesystem creation (using 141``mkfs.ubifs``) and stored in the superblock node. The log area contains only 142two types of nodes: *reference nodes* and *commit start nodes*. A commit start 143node is written whenever an index commit is performed. Reference nodes are 144written on every journal update. Each reference node points to the position of 145other nodes (inode nodes, data nodes etc.) on the flash that are part of this 146journal entry. These nodes are called *buds* and describe the actual filesystem 147changes including their data. 148 149The log area is maintained as a ring. Whenever the journal is almost full, 150a commit is initiated. This also writes a commit start node so that during 151mount, UBIFS will seek for the most recent commit start node and just replay 152every reference node after that. Every reference node before the commit start 153node will be ignored as they are already part of the on-flash index. 154 155When writing a journal entry, UBIFS first ensures that enough space is 156available to write the reference node and buds part of this entry. Then, the 157reference node is written and afterwards the buds describing the file changes. 158On replay, UBIFS will record every reference node and inspect the location of 159the referenced LEBs to discover the buds. If these are corrupt or missing, 160UBIFS will attempt to recover them by re-reading the LEB. This is however only 161done for the last referenced LEB of the journal. Only this can become corrupt 162because of a power cut. If the recovery fails, UBIFS will not mount. An error 163for every other LEB will directly cause UBIFS to fail the mount operation. 164 165:: 166 167 | ---- LOG AREA ---- | ---------- MAIN AREA ------------ | 168 169 -----+------+-----+--------+---- ------+-----+-----+--------------- 170 \ | | | | / / | | | \ 171 / CS | REF | REF | | \ \ DENT | INO | INO | / 172 \ | | | | / / | | | \ 173 ----+------+-----+--------+--- -------+-----+-----+---------------- 174 | | ^ ^ 175 | | | | 176 +------------------------+ | 177 | | 178 +-------------------------------+ 179 180 181 Figure 2: UBIFS flash layout of log area with commit start nodes 182 (CS) and reference nodes (REF) pointing to main area 183 containing their buds 184 185 186LEB Property Tree/Table 187~~~~~~~~~~~~~~~~~~~~~~~ 188 189The LEB property tree is used to store per-LEB information. This includes the 190LEB type and amount of free and *dirty* (old, obsolete content) space [1]_ on 191the LEB. The type is important, because UBIFS never mixes index nodes with data 192nodes on a single LEB and thus each LEB has a specific purpose. This again is 193useful for free space calculations. See [UBIFS-WP] for more details. 194 195The LEB property tree again is a B+ tree, but it is much smaller than the 196index. Due to its smaller size it is always written as one chunk on every 197commit. Thus, saving the LPT is an atomic operation. 198 199 200.. [1] Since LEBs can only be appended and never overwritten, there is a 201 difference between free space ie. the remaining space left on the LEB to be 202 written to without erasing it and previously written content that is obsolete 203 but can't be overwritten without erasing the full LEB. 204 205 206UBIFS Authentication 207==================== 208 209This chapter introduces UBIFS authentication which enables UBIFS to verify 210the authenticity and integrity of metadata and file contents stored on flash. 211 212 213Threat Model 214------------ 215 216UBIFS authentication enables detection of offline data modification. While it 217does not prevent it, it enables (trusted) code to check the integrity and 218authenticity of on-flash file contents and filesystem metadata. This covers 219attacks where file contents are swapped. 220 221UBIFS authentication will not protect against rollback of full flash contents. 222Ie. an attacker can still dump the flash and restore it at a later time without 223detection. It will also not protect against partial rollback of individual 224index commits. That means that an attacker is able to partially undo changes. 225This is possible because UBIFS does not immediately overwrites obsolete 226versions of the index tree or the journal, but instead marks them as obsolete 227and garbage collection erases them at a later time. An attacker can use this by 228erasing parts of the current tree and restoring old versions that are still on 229the flash and have not yet been erased. This is possible, because every commit 230will always write a new version of the index root node and the master node 231without overwriting the previous version. This is further helped by the 232wear-leveling operations of UBI which copies contents from one physical 233eraseblock to another and does not atomically erase the first eraseblock. 234 235UBIFS authentication does not cover attacks where an attacker is able to 236execute code on the device after the authentication key was provided. 237Additional measures like secure boot and trusted boot have to be taken to 238ensure that only trusted code is executed on a device. 239 240 241Authentication 242-------------- 243 244To be able to fully trust data read from flash, all UBIFS data structures 245stored on flash are authenticated. That is: 246 247- The index which includes file contents, file metadata like extended 248 attributes, file length etc. 249- The journal which also contains file contents and metadata by recording changes 250 to the filesystem 251- The LPT which stores UBI LEB metadata which UBIFS uses for free space accounting 252 253 254Index Authentication 255~~~~~~~~~~~~~~~~~~~~ 256 257Through UBIFS' concept of a wandering tree, it already takes care of only 258updating and persisting changed parts from leaf node up to the root node 259of the full B+ tree. This enables us to augment the index nodes of the tree 260with a hash over each node's child nodes. As a result, the index basically also 261a Merkle tree. Since the leaf nodes of the index contain the actual filesystem 262data, the hashes of their parent index nodes thus cover all the file contents 263and file metadata. When a file changes, the UBIFS index is updated accordingly 264from the leaf nodes up to the root node including the master node. This process 265can be hooked to recompute the hash only for each changed node at the same time. 266Whenever a file is read, UBIFS can verify the hashes from each leaf node up to 267the root node to ensure the node's integrity. 268 269To ensure the authenticity of the whole index, the UBIFS master node stores a 270keyed hash (HMAC) over its own contents and a hash of the root node of the index 271tree. As mentioned above, the master node is always written to the flash whenever 272the index is persisted (ie. on index commit). 273 274Using this approach only UBIFS index nodes and the master node are changed to 275include a hash. All other types of nodes will remain unchanged. This reduces 276the storage overhead which is precious for users of UBIFS (ie. embedded 277devices). 278 279:: 280 281 +---------------+ 282 | Master Node | 283 | (hash) | 284 +---------------+ 285 | 286 v 287 +-------------------+ 288 | Index Node #1 | 289 | | 290 | branch0 branchn | 291 | (hash) (hash) | 292 +-------------------+ 293 | ... | (fanout: 8) 294 | | 295 +-------+ +------+ 296 | | 297 v v 298 +-------------------+ +-------------------+ 299 | Index Node #2 | | Index Node #3 | 300 | | | | 301 | branch0 branchn | | branch0 branchn | 302 | (hash) (hash) | | (hash) (hash) | 303 +-------------------+ +-------------------+ 304 | ... | ... | 305 v v v 306 +-----------+ +----------+ +-----------+ 307 | Data Node | | INO Node | | DENT Node | 308 +-----------+ +----------+ +-----------+ 309 310 311 Figure 3: Coverage areas of index node hash and master node HMAC 312 313 314 315The most important part for robustness and power-cut safety is to atomically 316persist the hash and file contents. Here the existing UBIFS logic for how 317changed nodes are persisted is already designed for this purpose such that 318UBIFS can safely recover if a power-cut occurs while persisting. Adding 319hashes to index nodes does not change this since each hash will be persisted 320atomically together with its respective node. 321 322 323Journal Authentication 324~~~~~~~~~~~~~~~~~~~~~~ 325 326The journal is authenticated too. Since the journal is continuously written 327it is necessary to also add authentication information frequently to the 328journal so that in case of a powercut not too much data can't be authenticated. 329This is done by creating a continuous hash beginning from the commit start node 330over the previous reference nodes, the current reference node, and the bud 331nodes. From time to time whenever it is suitable authentication nodes are added 332between the bud nodes. This new node type contains a HMAC over the current state 333of the hash chain. That way a journal can be authenticated up to the last 334authentication node. The tail of the journal which may not have a authentication 335node cannot be authenticated and is skipped during journal replay. 336 337We get this picture for journal authentication:: 338 339 ,,,,,,,, 340 ,......,........................................... 341 ,. CS , hash1.----. hash2.----. 342 ,. | , . |hmac . |hmac 343 ,. v , . v . v 344 ,.REF#0,-> bud -> bud -> bud.-> auth -> bud -> bud.-> auth ... 345 ,..|...,........................................... 346 , | , 347 , | ,,,,,,,,,,,,,,, 348 . | hash3,----. 349 , | , |hmac 350 , v , v 351 , REF#1 -> bud -> bud,-> auth ... 352 ,,,|,,,,,,,,,,,,,,,,,, 353 v 354 REF#2 -> ... 355 | 356 V 357 ... 358 359Since the hash also includes the reference nodes an attacker cannot reorder or 360skip any journal heads for replay. An attacker can only remove bud nodes or 361reference nodes from the end of the journal, effectively rewinding the 362filesystem at maximum back to the last commit. 363 364The location of the log area is stored in the master node. Since the master 365node is authenticated with a HMAC as described above, it is not possible to 366tamper with that without detection. The size of the log area is specified when 367the filesystem is created using `mkfs.ubifs` and stored in the superblock node. 368To avoid tampering with this and other values stored there, a HMAC is added to 369the superblock struct. The superblock node is stored in LEB 0 and is only 370modified on feature flag or similar changes, but never on file changes. 371 372 373LPT Authentication 374~~~~~~~~~~~~~~~~~~ 375 376The location of the LPT root node on the flash is stored in the UBIFS master 377node. Since the LPT is written and read atomically on every commit, there is 378no need to authenticate individual nodes of the tree. It suffices to 379protect the integrity of the full LPT by a simple hash stored in the master 380node. Since the master node itself is authenticated, the LPTs authenticity can 381be verified by verifying the authenticity of the master node and comparing the 382LTP hash stored there with the hash computed from the read on-flash LPT. 383 384 385Key Management 386-------------- 387 388For simplicity, UBIFS authentication uses a single key to compute the HMACs 389of superblock, master, commit start and reference nodes. This key has to be 390available on creation of the filesystem (`mkfs.ubifs`) to authenticate the 391superblock node. Further, it has to be available on mount of the filesystem 392to verify authenticated nodes and generate new HMACs for changes. 393 394UBIFS authentication is intended to operate side-by-side with UBIFS encryption 395(fscrypt) to provide confidentiality and authenticity. Since UBIFS encryption 396has a different approach of encryption policies per directory, there can be 397multiple fscrypt master keys and there might be folders without encryption. 398UBIFS authentication on the other hand has an all-or-nothing approach in the 399sense that it either authenticates everything of the filesystem or nothing. 400Because of this and because UBIFS authentication should also be usable without 401encryption, it does not share the same master key with fscrypt, but manages 402a dedicated authentication key. 403 404The API for providing the authentication key has yet to be defined, but the 405key can eg. be provided by userspace through a keyring similar to the way it 406is currently done in fscrypt. It should however be noted that the current 407fscrypt approach has shown its flaws and the userspace API will eventually 408change [FSCRYPT-POLICY2]. 409 410Nevertheless, it will be possible for a user to provide a single passphrase 411or key in userspace that covers UBIFS authentication and encryption. This can 412be solved by the corresponding userspace tools which derive a second key for 413authentication in addition to the derived fscrypt master key used for 414encryption. 415 416To be able to check if the proper key is available on mount, the UBIFS 417superblock node will additionally store a hash of the authentication key. This 418approach is similar to the approach proposed for fscrypt encryption policy v2 419[FSCRYPT-POLICY2]. 420 421 422Future Extensions 423================= 424 425In certain cases where a vendor wants to provide an authenticated filesystem 426image to customers, it should be possible to do so without sharing the secret 427UBIFS authentication key. Instead, in addition the each HMAC a digital 428signature could be stored where the vendor shares the public key alongside the 429filesystem image. In case this filesystem has to be modified afterwards, 430UBIFS can exchange all digital signatures with HMACs on first mount similar 431to the way the IMA/EVM subsystem deals with such situations. The HMAC key 432will then have to be provided beforehand in the normal way. 433 434 435References 436========== 437 438[CRYPTSETUP2] https://www.saout.de/pipermail/dm-crypt/2017-November/005745.html 439 440[DMC-CBC-ATTACK] https://www.jakoblell.com/blog/2013/12/22/practical-malleability-attack-against-cbc-encrypted-luks-partitions/ 441 442[DM-INTEGRITY] https://www.kernel.org/doc/Documentation/device-mapper/dm-integrity.rst 443 444[DM-VERITY] https://www.kernel.org/doc/Documentation/device-mapper/verity.rst 445 446[FSCRYPT-POLICY2] https://www.spinics.net/lists/linux-ext4/msg58710.html 447 448[UBIFS-WP] http://www.linux-mtd.infradead.org/doc/ubifs_whitepaper.pdf 449