1.. SPDX-License-Identifier: GPL-2.0
2
3======================
4The seq_file Interface
5======================
6
7	Copyright 2003 Jonathan Corbet <corbet@lwn.net>
8
9	This file is originally from the LWN.net Driver Porting series at
10	https://lwn.net/Articles/driver-porting/
11
12
13There are numerous ways for a device driver (or other kernel component) to
14provide information to the user or system administrator.  One useful
15technique is the creation of virtual files, in debugfs, /proc or elsewhere.
16Virtual files can provide human-readable output that is easy to get at
17without any special utility programs; they can also make life easier for
18script writers. It is not surprising that the use of virtual files has
19grown over the years.
20
21Creating those files correctly has always been a bit of a challenge,
22however. It is not that hard to make a virtual file which returns a
23string. But life gets trickier if the output is long - anything greater
24than an application is likely to read in a single operation.  Handling
25multiple reads (and seeks) requires careful attention to the reader's
26position within the virtual file - that position is, likely as not, in the
27middle of a line of output. The kernel has traditionally had a number of
28implementations that got this wrong.
29
30The 2.6 kernel contains a set of functions (implemented by Alexander Viro)
31which are designed to make it easy for virtual file creators to get it
32right.
33
34The seq_file interface is available via <linux/seq_file.h>. There are
35three aspects to seq_file:
36
37     * An iterator interface which lets a virtual file implementation
38       step through the objects it is presenting.
39
40     * Some utility functions for formatting objects for output without
41       needing to worry about things like output buffers.
42
43     * A set of canned file_operations which implement most operations on
44       the virtual file.
45
46We'll look at the seq_file interface via an extremely simple example: a
47loadable module which creates a file called /proc/sequence. The file, when
48read, simply produces a set of increasing integer values, one per line. The
49sequence will continue until the user loses patience and finds something
50better to do. The file is seekable, in that one can do something like the
51following::
52
53    dd if=/proc/sequence of=out1 count=1
54    dd if=/proc/sequence skip=1 of=out2 count=1
55
56Then concatenate the output files out1 and out2 and get the right
57result. Yes, it is a thoroughly useless module, but the point is to show
58how the mechanism works without getting lost in other details.  (Those
59wanting to see the full source for this module can find it at
60https://lwn.net/Articles/22359/).
61
62Deprecated create_proc_entry
63============================
64
65Note that the above article uses create_proc_entry which was removed in
66kernel 3.10. Current versions require the following update::
67
68    -	entry = create_proc_entry("sequence", 0, NULL);
69    -	if (entry)
70    -		entry->proc_fops = &ct_file_ops;
71    +	entry = proc_create("sequence", 0, NULL, &ct_file_ops);
72
73The iterator interface
74======================
75
76Modules implementing a virtual file with seq_file must implement an
77iterator object that allows stepping through the data of interest
78during a "session" (roughly one read() system call).  If the iterator
79is able to move to a specific position - like the file they implement,
80though with freedom to map the position number to a sequence location
81in whatever way is convenient - the iterator need only exist
82transiently during a session.  If the iterator cannot easily find a
83numerical position but works well with a first/next interface, the
84iterator can be stored in the private data area and continue from one
85session to the next.
86
87A seq_file implementation that is formatting firewall rules from a
88table, for example, could provide a simple iterator that interprets
89position N as the Nth rule in the chain.  A seq_file implementation
90that presents the content of a, potentially volatile, linked list
91might record a pointer into that list, providing that can be done
92without risk of the current location being removed.
93
94Positioning can thus be done in whatever way makes the most sense for
95the generator of the data, which need not be aware of how a position
96translates to an offset in the virtual file. The one obvious exception
97is that a position of zero should indicate the beginning of the file.
98
99The /proc/sequence iterator just uses the count of the next number it
100will output as its position.
101
102Four functions must be implemented to make the iterator work. The
103first, called start(), starts a session and takes a position as an
104argument, returning an iterator which will start reading at that
105position.  The pos passed to start() will always be either zero, or
106the most recent pos used in the previous session.
107
108For our simple sequence example,
109the start() function looks like::
110
111	static void *ct_seq_start(struct seq_file *s, loff_t *pos)
112	{
113	        loff_t *spos = kmalloc(sizeof(loff_t), GFP_KERNEL);
114	        if (! spos)
115	                return NULL;
116	        *spos = *pos;
117	        return spos;
118	}
119
120The entire data structure for this iterator is a single loff_t value
121holding the current position. There is no upper bound for the sequence
122iterator, but that will not be the case for most other seq_file
123implementations; in most cases the start() function should check for a
124"past end of file" condition and return NULL if need be.
125
126For more complicated applications, the private field of the seq_file
127structure can be used to hold state from session to session.  There is
128also a special value which can be returned by the start() function
129called SEQ_START_TOKEN; it can be used if you wish to instruct your
130show() function (described below) to print a header at the top of the
131output. SEQ_START_TOKEN should only be used if the offset is zero,
132however.
133
134The next function to implement is called, amazingly, next(); its job is to
135move the iterator forward to the next position in the sequence.  The
136example module can simply increment the position by one; more useful
137modules will do what is needed to step through some data structure. The
138next() function returns a new iterator, or NULL if the sequence is
139complete. Here's the example version::
140
141	static void *ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
142	{
143	        loff_t *spos = v;
144	        *pos = ++*spos;
145	        return spos;
146	}
147
148The stop() function closes a session; its job, of course, is to clean
149up. If dynamic memory is allocated for the iterator, stop() is the
150place to free it; if a lock was taken by start(), stop() must release
151that lock.  The value that ``*pos`` was set to by the last next() call
152before stop() is remembered, and used for the first start() call of
153the next session unless lseek() has been called on the file; in that
154case next start() will be asked to start at position zero::
155
156	static void ct_seq_stop(struct seq_file *s, void *v)
157	{
158	        kfree(v);
159	}
160
161Finally, the show() function should format the object currently pointed to
162by the iterator for output.  The example module's show() function is::
163
164	static int ct_seq_show(struct seq_file *s, void *v)
165	{
166	        loff_t *spos = v;
167	        seq_printf(s, "%lld\n", (long long)*spos);
168	        return 0;
169	}
170
171If all is well, the show() function should return zero.  A negative error
172code in the usual manner indicates that something went wrong; it will be
173passed back to user space.  This function can also return SEQ_SKIP, which
174causes the current item to be skipped; if the show() function has already
175generated output before returning SEQ_SKIP, that output will be dropped.
176
177We will look at seq_printf() in a moment. But first, the definition of the
178seq_file iterator is finished by creating a seq_operations structure with
179the four functions we have just defined::
180
181	static const struct seq_operations ct_seq_ops = {
182	        .start = ct_seq_start,
183	        .next  = ct_seq_next,
184	        .stop  = ct_seq_stop,
185	        .show  = ct_seq_show
186	};
187
188This structure will be needed to tie our iterator to the /proc file in
189a little bit.
190
191It's worth noting that the iterator value returned by start() and
192manipulated by the other functions is considered to be completely opaque by
193the seq_file code. It can thus be anything that is useful in stepping
194through the data to be output. Counters can be useful, but it could also be
195a direct pointer into an array or linked list. Anything goes, as long as
196the programmer is aware that things can happen between calls to the
197iterator function. However, the seq_file code (by design) will not sleep
198between the calls to start() and stop(), so holding a lock during that time
199is a reasonable thing to do. The seq_file code will also avoid taking any
200other locks while the iterator is active.
201
202
203Formatted output
204================
205
206The seq_file code manages positioning within the output created by the
207iterator and getting it into the user's buffer. But, for that to work, that
208output must be passed to the seq_file code. Some utility functions have
209been defined which make this task easy.
210
211Most code will simply use seq_printf(), which works pretty much like
212printk(), but which requires the seq_file pointer as an argument.
213
214For straight character output, the following functions may be used::
215
216	seq_putc(struct seq_file *m, char c);
217	seq_puts(struct seq_file *m, const char *s);
218	seq_escape(struct seq_file *m, const char *s, const char *esc);
219
220The first two output a single character and a string, just like one would
221expect. seq_escape() is like seq_puts(), except that any character in s
222which is in the string esc will be represented in octal form in the output.
223
224There are also a pair of functions for printing filenames::
225
226	int seq_path(struct seq_file *m, const struct path *path,
227		     const char *esc);
228	int seq_path_root(struct seq_file *m, const struct path *path,
229			  const struct path *root, const char *esc)
230
231Here, path indicates the file of interest, and esc is a set of characters
232which should be escaped in the output.  A call to seq_path() will output
233the path relative to the current process's filesystem root.  If a different
234root is desired, it can be used with seq_path_root().  If it turns out that
235path cannot be reached from root, seq_path_root() returns SEQ_SKIP.
236
237A function producing complicated output may want to check::
238
239	bool seq_has_overflowed(struct seq_file *m);
240
241and avoid further seq_<output> calls if true is returned.
242
243A true return from seq_has_overflowed means that the seq_file buffer will
244be discarded and the seq_show function will attempt to allocate a larger
245buffer and retry printing.
246
247
248Making it all work
249==================
250
251So far, we have a nice set of functions which can produce output within the
252seq_file system, but we have not yet turned them into a file that a user
253can see. Creating a file within the kernel requires, of course, the
254creation of a set of file_operations which implement the operations on that
255file. The seq_file interface provides a set of canned operations which do
256most of the work. The virtual file author still must implement the open()
257method, however, to hook everything up. The open function is often a single
258line, as in the example module::
259
260	static int ct_open(struct inode *inode, struct file *file)
261	{
262		return seq_open(file, &ct_seq_ops);
263	}
264
265Here, the call to seq_open() takes the seq_operations structure we created
266before, and gets set up to iterate through the virtual file.
267
268On a successful open, seq_open() stores the struct seq_file pointer in
269file->private_data. If you have an application where the same iterator can
270be used for more than one file, you can store an arbitrary pointer in the
271private field of the seq_file structure; that value can then be retrieved
272by the iterator functions.
273
274There is also a wrapper function to seq_open() called seq_open_private(). It
275kmallocs a zero filled block of memory and stores a pointer to it in the
276private field of the seq_file structure, returning 0 on success. The
277block size is specified in a third parameter to the function, e.g.::
278
279	static int ct_open(struct inode *inode, struct file *file)
280	{
281		return seq_open_private(file, &ct_seq_ops,
282					sizeof(struct mystruct));
283	}
284
285There is also a variant function, __seq_open_private(), which is functionally
286identical except that, if successful, it returns the pointer to the allocated
287memory block, allowing further initialisation e.g.::
288
289	static int ct_open(struct inode *inode, struct file *file)
290	{
291		struct mystruct *p =
292			__seq_open_private(file, &ct_seq_ops, sizeof(*p));
293
294		if (!p)
295			return -ENOMEM;
296
297		p->foo = bar; /* initialize my stuff */
298			...
299		p->baz = true;
300
301		return 0;
302	}
303
304A corresponding close function, seq_release_private() is available which
305frees the memory allocated in the corresponding open.
306
307The other operations of interest - read(), llseek(), and release() - are
308all implemented by the seq_file code itself. So a virtual file's
309file_operations structure will look like::
310
311	static const struct file_operations ct_file_ops = {
312	        .owner   = THIS_MODULE,
313	        .open    = ct_open,
314	        .read    = seq_read,
315	        .llseek  = seq_lseek,
316	        .release = seq_release
317	};
318
319There is also a seq_release_private() which passes the contents of the
320seq_file private field to kfree() before releasing the structure.
321
322The final step is the creation of the /proc file itself. In the example
323code, that is done in the initialization code in the usual way::
324
325	static int ct_init(void)
326	{
327	        struct proc_dir_entry *entry;
328
329	        proc_create("sequence", 0, NULL, &ct_file_ops);
330	        return 0;
331	}
332
333	module_init(ct_init);
334
335And that is pretty much it.
336
337
338seq_list
339========
340
341If your file will be iterating through a linked list, you may find these
342routines useful::
343
344	struct list_head *seq_list_start(struct list_head *head,
345	       		 		 loff_t pos);
346	struct list_head *seq_list_start_head(struct list_head *head,
347			 		      loff_t pos);
348	struct list_head *seq_list_next(void *v, struct list_head *head,
349					loff_t *ppos);
350
351These helpers will interpret pos as a position within the list and iterate
352accordingly.  Your start() and next() functions need only invoke the
353``seq_list_*`` helpers with a pointer to the appropriate list_head structure.
354
355
356The extra-simple version
357========================
358
359For extremely simple virtual files, there is an even easier interface.  A
360module can define only the show() function, which should create all the
361output that the virtual file will contain. The file's open() method then
362calls::
363
364	int single_open(struct file *file,
365	                int (*show)(struct seq_file *m, void *p),
366	                void *data);
367
368When output time comes, the show() function will be called once. The data
369value given to single_open() can be found in the private field of the
370seq_file structure. When using single_open(), the programmer should use
371single_release() instead of seq_release() in the file_operations structure
372to avoid a memory leak.
373