1.. SPDX-License-Identifier: GPL-2.0 2 3========================================== 4WHAT IS Flash-Friendly File System (F2FS)? 5========================================== 6 7NAND flash memory-based storage devices, such as SSD, eMMC, and SD cards, have 8been equipped on a variety systems ranging from mobile to server systems. Since 9they are known to have different characteristics from the conventional rotating 10disks, a file system, an upper layer to the storage device, should adapt to the 11changes from the sketch in the design level. 12 13F2FS is a file system exploiting NAND flash memory-based storage devices, which 14is based on Log-structured File System (LFS). The design has been focused on 15addressing the fundamental issues in LFS, which are snowball effect of wandering 16tree and high cleaning overhead. 17 18Since a NAND flash memory-based storage device shows different characteristic 19according to its internal geometry or flash memory management scheme, namely FTL, 20F2FS and its tools support various parameters not only for configuring on-disk 21layout, but also for selecting allocation and cleaning algorithms. 22 23The following git tree provides the file system formatting tool (mkfs.f2fs), 24a consistency checking tool (fsck.f2fs), and a debugging tool (dump.f2fs). 25 26- git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git 27 28For reporting bugs and sending patches, please use the following mailing list: 29 30- linux-f2fs-devel@lists.sourceforge.net 31 32Background and Design issues 33============================ 34 35Log-structured File System (LFS) 36-------------------------------- 37"A log-structured file system writes all modifications to disk sequentially in 38a log-like structure, thereby speeding up both file writing and crash recovery. 39The log is the only structure on disk; it contains indexing information so that 40files can be read back from the log efficiently. In order to maintain large free 41areas on disk for fast writing, we divide the log into segments and use a 42segment cleaner to compress the live information from heavily fragmented 43segments." from Rosenblum, M. and Ousterhout, J. K., 1992, "The design and 44implementation of a log-structured file system", ACM Trans. Computer Systems 4510, 1, 26–52. 46 47Wandering Tree Problem 48---------------------- 49In LFS, when a file data is updated and written to the end of log, its direct 50pointer block is updated due to the changed location. Then the indirect pointer 51block is also updated due to the direct pointer block update. In this manner, 52the upper index structures such as inode, inode map, and checkpoint block are 53also updated recursively. This problem is called as wandering tree problem [1], 54and in order to enhance the performance, it should eliminate or relax the update 55propagation as much as possible. 56 57[1] Bityutskiy, A. 2005. JFFS3 design issues. http://www.linux-mtd.infradead.org/ 58 59Cleaning Overhead 60----------------- 61Since LFS is based on out-of-place writes, it produces so many obsolete blocks 62scattered across the whole storage. In order to serve new empty log space, it 63needs to reclaim these obsolete blocks seamlessly to users. This job is called 64as a cleaning process. 65 66The process consists of three operations as follows. 67 681. A victim segment is selected through referencing segment usage table. 692. It loads parent index structures of all the data in the victim identified by 70 segment summary blocks. 713. It checks the cross-reference between the data and its parent index structure. 724. It moves valid data selectively. 73 74This cleaning job may cause unexpected long delays, so the most important goal 75is to hide the latencies to users. And also definitely, it should reduce the 76amount of valid data to be moved, and move them quickly as well. 77 78Key Features 79============ 80 81Flash Awareness 82--------------- 83- Enlarge the random write area for better performance, but provide the high 84 spatial locality 85- Align FS data structures to the operational units in FTL as best efforts 86 87Wandering Tree Problem 88---------------------- 89- Use a term, “node”, that represents inodes as well as various pointer blocks 90- Introduce Node Address Table (NAT) containing the locations of all the “node” 91 blocks; this will cut off the update propagation. 92 93Cleaning Overhead 94----------------- 95- Support a background cleaning process 96- Support greedy and cost-benefit algorithms for victim selection policies 97- Support multi-head logs for static/dynamic hot and cold data separation 98- Introduce adaptive logging for efficient block allocation 99 100Mount Options 101============= 102 103 104======================== ============================================================ 105background_gc=%s Turn on/off cleaning operations, namely garbage 106 collection, triggered in background when I/O subsystem is 107 idle. If background_gc=on, it will turn on the garbage 108 collection and if background_gc=off, garbage collection 109 will be turned off. If background_gc=sync, it will turn 110 on synchronous garbage collection running in background. 111 Default value for this option is on. So garbage 112 collection is on by default. 113disable_roll_forward Disable the roll-forward recovery routine 114norecovery Disable the roll-forward recovery routine, mounted read- 115 only (i.e., -o ro,disable_roll_forward) 116discard/nodiscard Enable/disable real-time discard in f2fs, if discard is 117 enabled, f2fs will issue discard/TRIM commands when a 118 segment is cleaned. 119no_heap Disable heap-style segment allocation which finds free 120 segments for data from the beginning of main area, while 121 for node from the end of main area. 122nouser_xattr Disable Extended User Attributes. Note: xattr is enabled 123 by default if CONFIG_F2FS_FS_XATTR is selected. 124noacl Disable POSIX Access Control List. Note: acl is enabled 125 by default if CONFIG_F2FS_FS_POSIX_ACL is selected. 126active_logs=%u Support configuring the number of active logs. In the 127 current design, f2fs supports only 2, 4, and 6 logs. 128 Default number is 6. 129disable_ext_identify Disable the extension list configured by mkfs, so f2fs 130 does not aware of cold files such as media files. 131inline_xattr Enable the inline xattrs feature. 132noinline_xattr Disable the inline xattrs feature. 133inline_xattr_size=%u Support configuring inline xattr size, it depends on 134 flexible inline xattr feature. 135inline_data Enable the inline data feature: New created small(<~3.4k) 136 files can be written into inode block. 137inline_dentry Enable the inline dir feature: data in new created 138 directory entries can be written into inode block. The 139 space of inode block which is used to store inline 140 dentries is limited to ~3.4k. 141noinline_dentry Disable the inline dentry feature. 142flush_merge Merge concurrent cache_flush commands as much as possible 143 to eliminate redundant command issues. If the underlying 144 device handles the cache_flush command relatively slowly, 145 recommend to enable this option. 146nobarrier This option can be used if underlying storage guarantees 147 its cached data should be written to the novolatile area. 148 If this option is set, no cache_flush commands are issued 149 but f2fs still guarantees the write ordering of all the 150 data writes. 151fastboot This option is used when a system wants to reduce mount 152 time as much as possible, even though normal performance 153 can be sacrificed. 154extent_cache Enable an extent cache based on rb-tree, it can cache 155 as many as extent which map between contiguous logical 156 address and physical address per inode, resulting in 157 increasing the cache hit ratio. Set by default. 158noextent_cache Disable an extent cache based on rb-tree explicitly, see 159 the above extent_cache mount option. 160noinline_data Disable the inline data feature, inline data feature is 161 enabled by default. 162data_flush Enable data flushing before checkpoint in order to 163 persist data of regular and symlink. 164reserve_root=%d Support configuring reserved space which is used for 165 allocation from a privileged user with specified uid or 166 gid, unit: 4KB, the default limit is 0.2% of user blocks. 167resuid=%d The user ID which may use the reserved blocks. 168resgid=%d The group ID which may use the reserved blocks. 169fault_injection=%d Enable fault injection in all supported types with 170 specified injection rate. 171fault_type=%d Support configuring fault injection type, should be 172 enabled with fault_injection option, fault type value 173 is shown below, it supports single or combined type. 174 175 =================== =========== 176 Type_Name Type_Value 177 =================== =========== 178 FAULT_KMALLOC 0x000000001 179 FAULT_KVMALLOC 0x000000002 180 FAULT_PAGE_ALLOC 0x000000004 181 FAULT_PAGE_GET 0x000000008 182 FAULT_ALLOC_BIO 0x000000010 183 FAULT_ALLOC_NID 0x000000020 184 FAULT_ORPHAN 0x000000040 185 FAULT_BLOCK 0x000000080 186 FAULT_DIR_DEPTH 0x000000100 187 FAULT_EVICT_INODE 0x000000200 188 FAULT_TRUNCATE 0x000000400 189 FAULT_READ_IO 0x000000800 190 FAULT_CHECKPOINT 0x000001000 191 FAULT_DISCARD 0x000002000 192 FAULT_WRITE_IO 0x000004000 193 =================== =========== 194mode=%s Control block allocation mode which supports "adaptive" 195 and "lfs". In "lfs" mode, there should be no random 196 writes towards main area. 197io_bits=%u Set the bit size of write IO requests. It should be set 198 with "mode=lfs". 199usrquota Enable plain user disk quota accounting. 200grpquota Enable plain group disk quota accounting. 201prjquota Enable plain project quota accounting. 202usrjquota=<file> Appoint specified file and type during mount, so that quota 203grpjquota=<file> information can be properly updated during recovery flow, 204prjjquota=<file> <quota file>: must be in root directory; 205jqfmt=<quota type> <quota type>: [vfsold,vfsv0,vfsv1]. 206offusrjquota Turn off user journelled quota. 207offgrpjquota Turn off group journelled quota. 208offprjjquota Turn off project journelled quota. 209quota Enable plain user disk quota accounting. 210noquota Disable all plain disk quota option. 211whint_mode=%s Control which write hints are passed down to block 212 layer. This supports "off", "user-based", and 213 "fs-based". In "off" mode (default), f2fs does not pass 214 down hints. In "user-based" mode, f2fs tries to pass 215 down hints given by users. And in "fs-based" mode, f2fs 216 passes down hints with its policy. 217alloc_mode=%s Adjust block allocation policy, which supports "reuse" 218 and "default". 219fsync_mode=%s Control the policy of fsync. Currently supports "posix", 220 "strict", and "nobarrier". In "posix" mode, which is 221 default, fsync will follow POSIX semantics and does a 222 light operation to improve the filesystem performance. 223 In "strict" mode, fsync will be heavy and behaves in line 224 with xfs, ext4 and btrfs, where xfstest generic/342 will 225 pass, but the performance will regress. "nobarrier" is 226 based on "posix", but doesn't issue flush command for 227 non-atomic files likewise "nobarrier" mount option. 228test_dummy_encryption 229test_dummy_encryption=%s 230 Enable dummy encryption, which provides a fake fscrypt 231 context. The fake fscrypt context is used by xfstests. 232 The argument may be either "v1" or "v2", in order to 233 select the corresponding fscrypt policy version. 234checkpoint=%s[:%u[%]] Set to "disable" to turn off checkpointing. Set to "enable" 235 to reenable checkpointing. Is enabled by default. While 236 disabled, any unmounting or unexpected shutdowns will cause 237 the filesystem contents to appear as they did when the 238 filesystem was mounted with that option. 239 While mounting with checkpoint=disabled, the filesystem must 240 run garbage collection to ensure that all available space can 241 be used. If this takes too much time, the mount may return 242 EAGAIN. You may optionally add a value to indicate how much 243 of the disk you would be willing to temporarily give up to 244 avoid additional garbage collection. This can be given as a 245 number of blocks, or as a percent. For instance, mounting 246 with checkpoint=disable:100% would always succeed, but it may 247 hide up to all remaining free space. The actual space that 248 would be unusable can be viewed at /sys/fs/f2fs/<disk>/unusable 249 This space is reclaimed once checkpoint=enable. 250compress_algorithm=%s Control compress algorithm, currently f2fs supports "lzo", 251 "lz4", "zstd" and "lzo-rle" algorithm. 252compress_log_size=%u Support configuring compress cluster size, the size will 253 be 4KB * (1 << %u), 16KB is minimum size, also it's 254 default size. 255compress_extension=%s Support adding specified extension, so that f2fs can enable 256 compression on those corresponding files, e.g. if all files 257 with '.ext' has high compression rate, we can set the '.ext' 258 on compression extension list and enable compression on 259 these file by default rather than to enable it via ioctl. 260 For other files, we can still enable compression via ioctl. 261 Note that, there is one reserved special extension '*', it 262 can be set to enable compression for all files. 263inlinecrypt When possible, encrypt/decrypt the contents of encrypted 264 files using the blk-crypto framework rather than 265 filesystem-layer encryption. This allows the use of 266 inline encryption hardware. The on-disk format is 267 unaffected. For more details, see 268 Documentation/block/inline-encryption.rst. 269======================== ============================================================ 270 271Debugfs Entries 272=============== 273 274/sys/kernel/debug/f2fs/ contains information about all the partitions mounted as 275f2fs. Each file shows the whole f2fs information. 276 277/sys/kernel/debug/f2fs/status includes: 278 279 - major file system information managed by f2fs currently 280 - average SIT information about whole segments 281 - current memory footprint consumed by f2fs. 282 283Sysfs Entries 284============= 285 286Information about mounted f2fs file systems can be found in 287/sys/fs/f2fs. Each mounted filesystem will have a directory in 288/sys/fs/f2fs based on its device name (i.e., /sys/fs/f2fs/sda). 289The files in each per-device directory are shown in table below. 290 291Files in /sys/fs/f2fs/<devname> 292(see also Documentation/ABI/testing/sysfs-fs-f2fs) 293 294Usage 295===== 296 2971. Download userland tools and compile them. 298 2992. Skip, if f2fs was compiled statically inside kernel. 300 Otherwise, insert the f2fs.ko module:: 301 302 # insmod f2fs.ko 303 3043. Create a directory trying to mount:: 305 306 # mkdir /mnt/f2fs 307 3084. Format the block device, and then mount as f2fs:: 309 310 # mkfs.f2fs -l label /dev/block_device 311 # mount -t f2fs /dev/block_device /mnt/f2fs 312 313mkfs.f2fs 314--------- 315The mkfs.f2fs is for the use of formatting a partition as the f2fs filesystem, 316which builds a basic on-disk layout. 317 318The options consist of: 319 320=============== =========================================================== 321``-l [label]`` Give a volume label, up to 512 unicode name. 322``-a [0 or 1]`` Split start location of each area for heap-based allocation. 323 324 1 is set by default, which performs this. 325``-o [int]`` Set overprovision ratio in percent over volume size. 326 327 5 is set by default. 328``-s [int]`` Set the number of segments per section. 329 330 1 is set by default. 331``-z [int]`` Set the number of sections per zone. 332 333 1 is set by default. 334``-e [str]`` Set basic extension list. e.g. "mp3,gif,mov" 335``-t [0 or 1]`` Disable discard command or not. 336 337 1 is set by default, which conducts discard. 338=============== =========================================================== 339 340fsck.f2fs 341--------- 342The fsck.f2fs is a tool to check the consistency of an f2fs-formatted 343partition, which examines whether the filesystem metadata and user-made data 344are cross-referenced correctly or not. 345Note that, initial version of the tool does not fix any inconsistency. 346 347The options consist of:: 348 349 -d debug level [default:0] 350 351dump.f2fs 352--------- 353The dump.f2fs shows the information of specific inode and dumps SSA and SIT to 354file. Each file is dump_ssa and dump_sit. 355 356The dump.f2fs is used to debug on-disk data structures of the f2fs filesystem. 357It shows on-disk inode information recognized by a given inode number, and is 358able to dump all the SSA and SIT entries into predefined files, ./dump_ssa and 359./dump_sit respectively. 360 361The options consist of:: 362 363 -d debug level [default:0] 364 -i inode no (hex) 365 -s [SIT dump segno from #1~#2 (decimal), for all 0~-1] 366 -a [SSA dump segno from #1~#2 (decimal), for all 0~-1] 367 368Examples:: 369 370 # dump.f2fs -i [ino] /dev/sdx 371 # dump.f2fs -s 0~-1 /dev/sdx (SIT dump) 372 # dump.f2fs -a 0~-1 /dev/sdx (SSA dump) 373 374Design 375====== 376 377On-disk Layout 378-------------- 379 380F2FS divides the whole volume into a number of segments, each of which is fixed 381to 2MB in size. A section is composed of consecutive segments, and a zone 382consists of a set of sections. By default, section and zone sizes are set to one 383segment size identically, but users can easily modify the sizes by mkfs. 384 385F2FS splits the entire volume into six areas, and all the areas except superblock 386consists of multiple segments as described below:: 387 388 align with the zone size <-| 389 |-> align with the segment size 390 _________________________________________________________________________ 391 | | | Segment | Node | Segment | | 392 | Superblock | Checkpoint | Info. | Address | Summary | Main | 393 | (SB) | (CP) | Table (SIT) | Table (NAT) | Area (SSA) | | 394 |____________|_____2______|______N______|______N______|______N_____|__N___| 395 . . 396 . . 397 . . 398 ._________________________________________. 399 |_Segment_|_..._|_Segment_|_..._|_Segment_| 400 . . 401 ._________._________ 402 |_section_|__...__|_ 403 . . 404 .________. 405 |__zone__| 406 407- Superblock (SB) 408 It is located at the beginning of the partition, and there exist two copies 409 to avoid file system crash. It contains basic partition information and some 410 default parameters of f2fs. 411 412- Checkpoint (CP) 413 It contains file system information, bitmaps for valid NAT/SIT sets, orphan 414 inode lists, and summary entries of current active segments. 415 416- Segment Information Table (SIT) 417 It contains segment information such as valid block count and bitmap for the 418 validity of all the blocks. 419 420- Node Address Table (NAT) 421 It is composed of a block address table for all the node blocks stored in 422 Main area. 423 424- Segment Summary Area (SSA) 425 It contains summary entries which contains the owner information of all the 426 data and node blocks stored in Main area. 427 428- Main Area 429 It contains file and directory data including their indices. 430 431In order to avoid misalignment between file system and flash-based storage, F2FS 432aligns the start block address of CP with the segment size. Also, it aligns the 433start block address of Main area with the zone size by reserving some segments 434in SSA area. 435 436Reference the following survey for additional technical details. 437https://wiki.linaro.org/WorkingGroups/Kernel/Projects/FlashCardSurvey 438 439File System Metadata Structure 440------------------------------ 441 442F2FS adopts the checkpointing scheme to maintain file system consistency. At 443mount time, F2FS first tries to find the last valid checkpoint data by scanning 444CP area. In order to reduce the scanning time, F2FS uses only two copies of CP. 445One of them always indicates the last valid data, which is called as shadow copy 446mechanism. In addition to CP, NAT and SIT also adopt the shadow copy mechanism. 447 448For file system consistency, each CP points to which NAT and SIT copies are 449valid, as shown as below:: 450 451 +--------+----------+---------+ 452 | CP | SIT | NAT | 453 +--------+----------+---------+ 454 . . . . 455 . . . . 456 . . . . 457 +-------+-------+--------+--------+--------+--------+ 458 | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 | 459 +-------+-------+--------+--------+--------+--------+ 460 | ^ ^ 461 | | | 462 `----------------------------------------' 463 464Index Structure 465--------------- 466 467The key data structure to manage the data locations is a "node". Similar to 468traditional file structures, F2FS has three types of node: inode, direct node, 469indirect node. F2FS assigns 4KB to an inode block which contains 923 data block 470indices, two direct node pointers, two indirect node pointers, and one double 471indirect node pointer as described below. One direct node block contains 1018 472data blocks, and one indirect node block contains also 1018 node blocks. Thus, 473one inode block (i.e., a file) covers:: 474 475 4KB * (923 + 2 * 1018 + 2 * 1018 * 1018 + 1018 * 1018 * 1018) := 3.94TB. 476 477 Inode block (4KB) 478 |- data (923) 479 |- direct node (2) 480 | `- data (1018) 481 |- indirect node (2) 482 | `- direct node (1018) 483 | `- data (1018) 484 `- double indirect node (1) 485 `- indirect node (1018) 486 `- direct node (1018) 487 `- data (1018) 488 489Note that, all the node blocks are mapped by NAT which means the location of 490each node is translated by the NAT table. In the consideration of the wandering 491tree problem, F2FS is able to cut off the propagation of node updates caused by 492leaf data writes. 493 494Directory Structure 495------------------- 496 497A directory entry occupies 11 bytes, which consists of the following attributes. 498 499- hash hash value of the file name 500- ino inode number 501- len the length of file name 502- type file type such as directory, symlink, etc 503 504A dentry block consists of 214 dentry slots and file names. Therein a bitmap is 505used to represent whether each dentry is valid or not. A dentry block occupies 5064KB with the following composition. 507 508:: 509 510 Dentry Block(4 K) = bitmap (27 bytes) + reserved (3 bytes) + 511 dentries(11 * 214 bytes) + file name (8 * 214 bytes) 512 513 [Bucket] 514 +--------------------------------+ 515 |dentry block 1 | dentry block 2 | 516 +--------------------------------+ 517 . . 518 . . 519 . [Dentry Block Structure: 4KB] . 520 +--------+----------+----------+------------+ 521 | bitmap | reserved | dentries | file names | 522 +--------+----------+----------+------------+ 523 [Dentry Block: 4KB] . . 524 . . 525 . . 526 +------+------+-----+------+ 527 | hash | ino | len | type | 528 +------+------+-----+------+ 529 [Dentry Structure: 11 bytes] 530 531F2FS implements multi-level hash tables for directory structure. Each level has 532a hash table with dedicated number of hash buckets as shown below. Note that 533"A(2B)" means a bucket includes 2 data blocks. 534 535:: 536 537 ---------------------- 538 A : bucket 539 B : block 540 N : MAX_DIR_HASH_DEPTH 541 ---------------------- 542 543 level #0 | A(2B) 544 | 545 level #1 | A(2B) - A(2B) 546 | 547 level #2 | A(2B) - A(2B) - A(2B) - A(2B) 548 . | . . . . 549 level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) 550 . | . . . . 551 level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B) 552 553The number of blocks and buckets are determined by:: 554 555 ,- 2, if n < MAX_DIR_HASH_DEPTH / 2, 556 # of blocks in level #n = | 557 `- 4, Otherwise 558 559 ,- 2^(n + dir_level), 560 | if n + dir_level < MAX_DIR_HASH_DEPTH / 2, 561 # of buckets in level #n = | 562 `- 2^((MAX_DIR_HASH_DEPTH / 2) - 1), 563 Otherwise 564 565When F2FS finds a file name in a directory, at first a hash value of the file 566name is calculated. Then, F2FS scans the hash table in level #0 to find the 567dentry consisting of the file name and its inode number. If not found, F2FS 568scans the next hash table in level #1. In this way, F2FS scans hash tables in 569each levels incrementally from 1 to N. In each levels F2FS needs to scan only 570one bucket determined by the following equation, which shows O(log(# of files)) 571complexity:: 572 573 bucket number to scan in level #n = (hash value) % (# of buckets in level #n) 574 575In the case of file creation, F2FS finds empty consecutive slots that cover the 576file name. F2FS searches the empty slots in the hash tables of whole levels from 5771 to N in the same way as the lookup operation. 578 579The following figure shows an example of two cases holding children:: 580 581 --------------> Dir <-------------- 582 | | 583 child child 584 585 child - child [hole] - child 586 587 child - child - child [hole] - [hole] - child 588 589 Case 1: Case 2: 590 Number of children = 6, Number of children = 3, 591 File size = 7 File size = 7 592 593Default Block Allocation 594------------------------ 595 596At runtime, F2FS manages six active logs inside "Main" area: Hot/Warm/Cold node 597and Hot/Warm/Cold data. 598 599- Hot node contains direct node blocks of directories. 600- Warm node contains direct node blocks except hot node blocks. 601- Cold node contains indirect node blocks 602- Hot data contains dentry blocks 603- Warm data contains data blocks except hot and cold data blocks 604- Cold data contains multimedia data or migrated data blocks 605 606LFS has two schemes for free space management: threaded log and copy-and-compac- 607tion. The copy-and-compaction scheme which is known as cleaning, is well-suited 608for devices showing very good sequential write performance, since free segments 609are served all the time for writing new data. However, it suffers from cleaning 610overhead under high utilization. Contrarily, the threaded log scheme suffers 611from random writes, but no cleaning process is needed. F2FS adopts a hybrid 612scheme where the copy-and-compaction scheme is adopted by default, but the 613policy is dynamically changed to the threaded log scheme according to the file 614system status. 615 616In order to align F2FS with underlying flash-based storage, F2FS allocates a 617segment in a unit of section. F2FS expects that the section size would be the 618same as the unit size of garbage collection in FTL. Furthermore, with respect 619to the mapping granularity in FTL, F2FS allocates each section of the active 620logs from different zones as much as possible, since FTL can write the data in 621the active logs into one allocation unit according to its mapping granularity. 622 623Cleaning process 624---------------- 625 626F2FS does cleaning both on demand and in the background. On-demand cleaning is 627triggered when there are not enough free segments to serve VFS calls. Background 628cleaner is operated by a kernel thread, and triggers the cleaning job when the 629system is idle. 630 631F2FS supports two victim selection policies: greedy and cost-benefit algorithms. 632In the greedy algorithm, F2FS selects a victim segment having the smallest number 633of valid blocks. In the cost-benefit algorithm, F2FS selects a victim segment 634according to the segment age and the number of valid blocks in order to address 635log block thrashing problem in the greedy algorithm. F2FS adopts the greedy 636algorithm for on-demand cleaner, while background cleaner adopts cost-benefit 637algorithm. 638 639In order to identify whether the data in the victim segment are valid or not, 640F2FS manages a bitmap. Each bit represents the validity of a block, and the 641bitmap is composed of a bit stream covering whole blocks in main area. 642 643Write-hint Policy 644----------------- 645 6461) whint_mode=off. F2FS only passes down WRITE_LIFE_NOT_SET. 647 6482) whint_mode=user-based. F2FS tries to pass down hints given by 649users. 650 651===================== ======================== =================== 652User F2FS Block 653===================== ======================== =================== 654 META WRITE_LIFE_NOT_SET 655 HOT_NODE " 656 WARM_NODE " 657 COLD_NODE " 658ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME 659extension list " " 660 661-- buffered io 662WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME 663WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT 664WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET 665WRITE_LIFE_NONE " " 666WRITE_LIFE_MEDIUM " " 667WRITE_LIFE_LONG " " 668 669-- direct io 670WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME 671WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT 672WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET 673WRITE_LIFE_NONE " WRITE_LIFE_NONE 674WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM 675WRITE_LIFE_LONG " WRITE_LIFE_LONG 676===================== ======================== =================== 677 6783) whint_mode=fs-based. F2FS passes down hints with its policy. 679 680===================== ======================== =================== 681User F2FS Block 682===================== ======================== =================== 683 META WRITE_LIFE_MEDIUM; 684 HOT_NODE WRITE_LIFE_NOT_SET 685 WARM_NODE " 686 COLD_NODE WRITE_LIFE_NONE 687ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME 688extension list " " 689 690-- buffered io 691WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME 692WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT 693WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_LONG 694WRITE_LIFE_NONE " " 695WRITE_LIFE_MEDIUM " " 696WRITE_LIFE_LONG " " 697 698-- direct io 699WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME 700WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT 701WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET 702WRITE_LIFE_NONE " WRITE_LIFE_NONE 703WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM 704WRITE_LIFE_LONG " WRITE_LIFE_LONG 705===================== ======================== =================== 706 707Fallocate(2) Policy 708------------------- 709 710The default policy follows the below posix rule. 711 712Allocating disk space 713 The default operation (i.e., mode is zero) of fallocate() allocates 714 the disk space within the range specified by offset and len. The 715 file size (as reported by stat(2)) will be changed if offset+len is 716 greater than the file size. Any subregion within the range specified 717 by offset and len that did not contain data before the call will be 718 initialized to zero. This default behavior closely resembles the 719 behavior of the posix_fallocate(3) library function, and is intended 720 as a method of optimally implementing that function. 721 722However, once F2FS receives ioctl(fd, F2FS_IOC_SET_PIN_FILE) in prior to 723fallocate(fd, DEFAULT_MODE), it allocates on-disk blocks addressess having 724zero or random data, which is useful to the below scenario where: 725 726 1. create(fd) 727 2. ioctl(fd, F2FS_IOC_SET_PIN_FILE) 728 3. fallocate(fd, 0, 0, size) 729 4. address = fibmap(fd, offset) 730 5. open(blkdev) 731 6. write(blkdev, address) 732 733Compression implementation 734-------------------------- 735 736- New term named cluster is defined as basic unit of compression, file can 737 be divided into multiple clusters logically. One cluster includes 4 << n 738 (n >= 0) logical pages, compression size is also cluster size, each of 739 cluster can be compressed or not. 740 741- In cluster metadata layout, one special block address is used to indicate 742 cluster is compressed one or normal one, for compressed cluster, following 743 metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs 744 stores data including compress header and compressed data. 745 746- In order to eliminate write amplification during overwrite, F2FS only 747 support compression on write-once file, data can be compressed only when 748 all logical blocks in cluster contain valid data and compress ratio of 749 cluster data is lower than specified threshold. 750 751- To enable compression on regular inode, there are three ways: 752 753 * chattr +c file 754 * chattr +c dir; touch dir/file 755 * mount w/ -o compress_extension=ext; touch file.ext 756 757Compress metadata layout:: 758 759 [Dnode Structure] 760 +-----------------------------------------------+ 761 | cluster 1 | cluster 2 | ......... | cluster N | 762 +-----------------------------------------------+ 763 . . . . 764 . . . . 765 . Compressed Cluster . . Normal Cluster . 766 +----------+---------+---------+---------+ +---------+---------+---------+---------+ 767 |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | 768 +----------+---------+---------+---------+ +---------+---------+---------+---------+ 769 . . 770 . . 771 . . 772 +-------------+-------------+----------+----------------------------+ 773 | data length | data chksum | reserved | compressed data | 774 +-------------+-------------+----------+----------------------------+ 775