1.. SPDX-License-Identifier: GPL-2.0
2
3Extended Attributes
4-------------------
5
6Extended attributes (xattrs) are typically stored in a separate data
7block on the disk and referenced from inodes via ``inode.i_file_acl*``.
8The first use of extended attributes seems to have been for storing file
9ACLs and other security data (selinux). With the ``user_xattr`` mount
10option it is possible for users to store extended attributes so long as
11all attribute names begin with “user”; this restriction seems to have
12disappeared as of Linux 3.0.
13
14There are two places where extended attributes can be found. The first
15place is between the end of each inode entry and the beginning of the
16next inode entry. For example, if inode.i\_extra\_isize = 28 and
17sb.inode\_size = 256, then there are 256 - (128 + 28) = 100 bytes
18available for in-inode extended attribute storage. The second place
19where extended attributes can be found is in the block pointed to by
20``inode.i_file_acl``. As of Linux 3.11, it is not possible for this
21block to contain a pointer to a second extended attribute block (or even
22the remaining blocks of a cluster). In theory it is possible for each
23attribute's value to be stored in a separate data block, though as of
24Linux 3.11 the code does not permit this.
25
26Keys are generally assumed to be ASCIIZ strings, whereas values can be
27strings or binary data.
28
29Extended attributes, when stored after the inode, have a header
30``ext4_xattr_ibody_header`` that is 4 bytes long:
31
32.. list-table::
33   :widths: 8 8 24 40
34   :header-rows: 1
35
36   * - Offset
37     - Type
38     - Name
39     - Description
40   * - 0x0
41     - \_\_le32
42     - h\_magic
43     - Magic number for identification, 0xEA020000. This value is set by the
44       Linux driver, though e2fsprogs doesn't seem to check it(?)
45
46The beginning of an extended attribute block is in
47``struct ext4_xattr_header``, which is 32 bytes long:
48
49.. list-table::
50   :widths: 8 8 24 40
51   :header-rows: 1
52
53   * - Offset
54     - Type
55     - Name
56     - Description
57   * - 0x0
58     - \_\_le32
59     - h\_magic
60     - Magic number for identification, 0xEA020000.
61   * - 0x4
62     - \_\_le32
63     - h\_refcount
64     - Reference count.
65   * - 0x8
66     - \_\_le32
67     - h\_blocks
68     - Number of disk blocks used.
69   * - 0xC
70     - \_\_le32
71     - h\_hash
72     - Hash value of all attributes.
73   * - 0x10
74     - \_\_le32
75     - h\_checksum
76     - Checksum of the extended attribute block.
77   * - 0x14
78     - \_\_u32
79     - h\_reserved[3]
80     - Zero.
81
82The checksum is calculated against the FS UUID, the 64-bit block number
83of the extended attribute block, and the entire block (header +
84entries).
85
86Following the ``struct ext4_xattr_header`` or
87``struct ext4_xattr_ibody_header`` is an array of
88``struct ext4_xattr_entry``; each of these entries is at least 16 bytes
89long. When stored in an external block, the ``struct ext4_xattr_entry``
90entries must be stored in sorted order. The sort order is
91``e_name_index``, then ``e_name_len``, and finally ``e_name``.
92Attributes stored inside an inode do not need be stored in sorted order.
93
94.. list-table::
95   :widths: 8 8 24 40
96   :header-rows: 1
97
98   * - Offset
99     - Type
100     - Name
101     - Description
102   * - 0x0
103     - \_\_u8
104     - e\_name\_len
105     - Length of name.
106   * - 0x1
107     - \_\_u8
108     - e\_name\_index
109     - Attribute name index. There is a discussion of this below.
110   * - 0x2
111     - \_\_le16
112     - e\_value\_offs
113     - Location of this attribute's value on the disk block where it is stored.
114       Multiple attributes can share the same value. For an inode attribute
115       this value is relative to the start of the first entry; for a block this
116       value is relative to the start of the block (i.e. the header).
117   * - 0x4
118     - \_\_le32
119     - e\_value\_inum
120     - The inode where the value is stored. Zero indicates the value is in the
121       same block as this entry. This field is only used if the
122       INCOMPAT\_EA\_INODE feature is enabled.
123   * - 0x8
124     - \_\_le32
125     - e\_value\_size
126     - Length of attribute value.
127   * - 0xC
128     - \_\_le32
129     - e\_hash
130     - Hash value of attribute name and attribute value. The kernel doesn't
131       update the hash for in-inode attributes, so for that case this value
132       must be zero, because e2fsck validates any non-zero hash regardless of
133       where the xattr lives.
134   * - 0x10
135     - char
136     - e\_name[e\_name\_len]
137     - Attribute name. Does not include trailing NULL.
138
139Attribute values can follow the end of the entry table. There appears to
140be a requirement that they be aligned to 4-byte boundaries. The values
141are stored starting at the end of the block and grow towards the
142xattr\_header/xattr\_entry table. When the two collide, the overflow is
143put into a separate disk block. If the disk block fills up, the
144filesystem returns -ENOSPC.
145
146The first four fields of the ``ext4_xattr_entry`` are set to zero to
147mark the end of the key list.
148
149Attribute Name Indices
150~~~~~~~~~~~~~~~~~~~~~~
151
152Logically speaking, extended attributes are a series of key=value pairs.
153The keys are assumed to be NULL-terminated strings. To reduce the amount
154of on-disk space that the keys consume, the beginning of the key string
155is matched against the attribute name index. If a match is found, the
156attribute name index field is set, and matching string is removed from
157the key name. Here is a map of name index values to key prefixes:
158
159.. list-table::
160   :widths: 16 64
161   :header-rows: 1
162
163   * - Name Index
164     - Key Prefix
165   * - 0
166     - (no prefix)
167   * - 1
168     - “user.”
169   * - 2
170     - “system.posix\_acl\_access”
171   * - 3
172     - “system.posix\_acl\_default”
173   * - 4
174     - “trusted.”
175   * - 6
176     - “security.”
177   * - 7
178     - “system.” (inline\_data only?)
179   * - 8
180     - “system.richacl” (SuSE kernels only?)
181
182For example, if the attribute key is “user.fubar”, the attribute name
183index is set to 1 and the “fubar” name is recorded on disk.
184
185POSIX ACLs
186~~~~~~~~~~
187
188POSIX ACLs are stored in a reduced version of the Linux kernel (and
189libacl's) internal ACL format. The key difference is that the version
190number is different (1) and the ``e_id`` field is only stored for named
191user and group ACLs.
192