1.. SPDX-License-Identifier: GPL-2.0 2 3============================ 4Ceph Distributed File System 5============================ 6 7Ceph is a distributed network file system designed to provide good 8performance, reliability, and scalability. 9 10Basic features include: 11 12 * POSIX semantics 13 * Seamless scaling from 1 to many thousands of nodes 14 * High availability and reliability. No single point of failure. 15 * N-way replication of data across storage nodes 16 * Fast recovery from node failures 17 * Automatic rebalancing of data on node addition/removal 18 * Easy deployment: most FS components are userspace daemons 19 20Also, 21 22 * Flexible snapshots (on any directory) 23 * Recursive accounting (nested files, directories, bytes) 24 25In contrast to cluster filesystems like GFS, OCFS2, and GPFS that rely 26on symmetric access by all clients to shared block devices, Ceph 27separates data and metadata management into independent server 28clusters, similar to Lustre. Unlike Lustre, however, metadata and 29storage nodes run entirely as user space daemons. File data is striped 30across storage nodes in large chunks to distribute workload and 31facilitate high throughputs. When storage nodes fail, data is 32re-replicated in a distributed fashion by the storage nodes themselves 33(with some minimal coordination from a cluster monitor), making the 34system extremely efficient and scalable. 35 36Metadata servers effectively form a large, consistent, distributed 37in-memory cache above the file namespace that is extremely scalable, 38dynamically redistributes metadata in response to workload changes, 39and can tolerate arbitrary (well, non-Byzantine) node failures. The 40metadata server takes a somewhat unconventional approach to metadata 41storage to significantly improve performance for common workloads. In 42particular, inodes with only a single link are embedded in 43directories, allowing entire directories of dentries and inodes to be 44loaded into its cache with a single I/O operation. The contents of 45extremely large directories can be fragmented and managed by 46independent metadata servers, allowing scalable concurrent access. 47 48The system offers automatic data rebalancing/migration when scaling 49from a small cluster of just a few nodes to many hundreds, without 50requiring an administrator carve the data set into static volumes or 51go through the tedious process of migrating data between servers. 52When the file system approaches full, new nodes can be easily added 53and things will "just work." 54 55Ceph includes flexible snapshot mechanism that allows a user to create 56a snapshot on any subdirectory (and its nested contents) in the 57system. Snapshot creation and deletion are as simple as 'mkdir 58.snap/foo' and 'rmdir .snap/foo'. 59 60Ceph also provides some recursive accounting on directories for nested 61files and bytes. That is, a 'getfattr -d foo' on any directory in the 62system will reveal the total number of nested regular files and 63subdirectories, and a summation of all nested file sizes. This makes 64the identification of large disk space consumers relatively quick, as 65no 'du' or similar recursive scan of the file system is required. 66 67Finally, Ceph also allows quotas to be set on any directory in the system. 68The quota can restrict the number of bytes or the number of files stored 69beneath that point in the directory hierarchy. Quotas can be set using 70extended attributes 'ceph.quota.max_files' and 'ceph.quota.max_bytes', eg:: 71 72 setfattr -n ceph.quota.max_bytes -v 100000000 /some/dir 73 getfattr -n ceph.quota.max_bytes /some/dir 74 75A limitation of the current quotas implementation is that it relies on the 76cooperation of the client mounting the file system to stop writers when a 77limit is reached. A modified or adversarial client cannot be prevented 78from writing as much data as it needs. 79 80Mount Syntax 81============ 82 83The basic mount syntax is:: 84 85 # mount -t ceph user@fsid.fs_name=/[subdir] mnt -o mon_addr=monip1[:port][/monip2[:port]] 86 87You only need to specify a single monitor, as the client will get the 88full list when it connects. (However, if the monitor you specify 89happens to be down, the mount won't succeed.) The port can be left 90off if the monitor is using the default. So if the monitor is at 911.2.3.4:: 92 93 # mount -t ceph cephuser@07fe3187-00d9-42a3-814b-72a4d5e7d5be.cephfs=/ /mnt/ceph -o mon_addr=1.2.3.4 94 95is sufficient. If /sbin/mount.ceph is installed, a hostname can be 96used instead of an IP address and the cluster FSID can be left out 97(as the mount helper will fill it in by reading the ceph configuration 98file):: 99 100 # mount -t ceph cephuser@cephfs=/ /mnt/ceph -o mon_addr=mon-addr 101 102Multiple monitor addresses can be passed by separating each address with a slash (`/`):: 103 104 # mount -t ceph cephuser@cephfs=/ /mnt/ceph -o mon_addr=192.168.1.100/192.168.1.101 105 106When using the mount helper, monitor address can be read from ceph 107configuration file if available. Note that, the cluster FSID (passed as part 108of the device string) is validated by checking it with the FSID reported by 109the monitor. 110 111Mount Options 112============= 113 114 mon_addr=ip_address[:port][/ip_address[:port]] 115 Monitor address to the cluster. This is used to bootstrap the 116 connection to the cluster. Once connection is established, the 117 monitor addresses in the monitor map are followed. 118 119 fsid=cluster-id 120 FSID of the cluster (from `ceph fsid` command). 121 122 ip=A.B.C.D[:N] 123 Specify the IP and/or port the client should bind to locally. 124 There is normally not much reason to do this. If the IP is not 125 specified, the client's IP address is determined by looking at the 126 address its connection to the monitor originates from. 127 128 wsize=X 129 Specify the maximum write size in bytes. Default: 64 MB. 130 131 rsize=X 132 Specify the maximum read size in bytes. Default: 64 MB. 133 134 rasize=X 135 Specify the maximum readahead size in bytes. Default: 8 MB. 136 137 mount_timeout=X 138 Specify the timeout value for mount (in seconds), in the case 139 of a non-responsive Ceph file system. The default is 60 140 seconds. 141 142 caps_max=X 143 Specify the maximum number of caps to hold. Unused caps are released 144 when number of caps exceeds the limit. The default is 0 (no limit) 145 146 rbytes 147 When stat() is called on a directory, set st_size to 'rbytes', 148 the summation of file sizes over all files nested beneath that 149 directory. This is the default. 150 151 norbytes 152 When stat() is called on a directory, set st_size to the 153 number of entries in that directory. 154 155 nocrc 156 Disable CRC32C calculation for data writes. If set, the storage node 157 must rely on TCP's error correction to detect data corruption 158 in the data payload. 159 160 dcache 161 Use the dcache contents to perform negative lookups and 162 readdir when the client has the entire directory contents in 163 its cache. (This does not change correctness; the client uses 164 cached metadata only when a lease or capability ensures it is 165 valid.) 166 167 nodcache 168 Do not use the dcache as above. This avoids a significant amount of 169 complex code, sacrificing performance without affecting correctness, 170 and is useful for tracking down bugs. 171 172 noasyncreaddir 173 Do not use the dcache as above for readdir. 174 175 noquotadf 176 Report overall filesystem usage in statfs instead of using the root 177 directory quota. 178 179 nocopyfrom 180 Don't use the RADOS 'copy-from' operation to perform remote object 181 copies. Currently, it's only used in copy_file_range, which will revert 182 to the default VFS implementation if this option is used. 183 184 recover_session=<no|clean> 185 Set auto reconnect mode in the case where the client is blocklisted. The 186 available modes are "no" and "clean". The default is "no". 187 188 * no: never attempt to reconnect when client detects that it has been 189 blocklisted. Operations will generally fail after being blocklisted. 190 191 * clean: client reconnects to the ceph cluster automatically when it 192 detects that it has been blocklisted. During reconnect, client drops 193 dirty data/metadata, invalidates page caches and writable file handles. 194 After reconnect, file locks become stale because the MDS loses track 195 of them. If an inode contains any stale file locks, read/write on the 196 inode is not allowed until applications release all stale file locks. 197 198More Information 199================ 200 201For more information on Ceph, see the home page at 202 https://ceph.com/ 203 204The Linux kernel client source tree is available at 205 - https://github.com/ceph/ceph-client.git 206 - git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git 207 208and the source for the full system is at 209 https://github.com/ceph/ceph.git 210