1========================= 2Audio Stream in SoundWire 3========================= 4 5An audio stream is a logical or virtual connection created between 6 7 (1) System memory buffer(s) and Codec(s) 8 9 (2) DSP memory buffer(s) and Codec(s) 10 11 (3) FIFO(s) and Codec(s) 12 13 (4) Codec(s) and Codec(s) 14 15which is typically driven by a DMA(s) channel through the data link. An 16audio stream contains one or more channels of data. All channels within 17stream must have same sample rate and same sample size. 18 19Assume a stream with two channels (Left & Right) is opened using SoundWire 20interface. Below are some ways a stream can be represented in SoundWire. 21 22Stream Sample in memory (System memory, DSP memory or FIFOs) :: 23 24 ------------------------- 25 | L | R | L | R | L | R | 26 ------------------------- 27 28Example 1: Stereo Stream with L and R channels is rendered from Master to 29Slave. Both Master and Slave is using single port. :: 30 31 +---------------+ Clock Signal +---------------+ 32 | Master +----------------------------------+ Slave | 33 | Interface | | Interface | 34 | | | 1 | 35 | | Data Signal | | 36 | L + R +----------------------------------+ L + R | 37 | (Data) | Data Direction | (Data) | 38 +---------------+ +-----------------------> +---------------+ 39 40 41Example 2: Stereo Stream with L and R channels is captured from Slave to 42Master. Both Master and Slave is using single port. :: 43 44 45 +---------------+ Clock Signal +---------------+ 46 | Master +----------------------------------+ Slave | 47 | Interface | | Interface | 48 | | | 1 | 49 | | Data Signal | | 50 | L + R +----------------------------------+ L + R | 51 | (Data) | Data Direction | (Data) | 52 +---------------+ <-----------------------+ +---------------+ 53 54 55Example 3: Stereo Stream with L and R channels is rendered by Master. Each 56of the L and R channel is received by two different Slaves. Master and both 57Slaves are using single port. :: 58 59 +---------------+ Clock Signal +---------------+ 60 | Master +---------+------------------------+ Slave | 61 | Interface | | | Interface | 62 | | | | 1 | 63 | | | Data Signal | | 64 | L + R +---+------------------------------+ L | 65 | (Data) | | | Data Direction | (Data) | 66 +---------------+ | | +-------------> +---------------+ 67 | | 68 | | 69 | | +---------------+ 70 | +----------------------> | Slave | 71 | | Interface | 72 | | 2 | 73 | | | 74 +----------------------------> | R | 75 | (Data) | 76 +---------------+ 77 78 79Example 4: Stereo Stream with L and R channel is rendered by two different 80Ports of the Master and is received by only single Port of the Slave 81interface. :: 82 83 +--------------------+ 84 | | 85 | +--------------+ +----------------+ 86 | | || | | 87 | | Data Port || L Channel | | 88 | | 1 |------------+ | | 89 | | L Channel || | +-----+----+ | 90 | | (Data) || | L + R Channel || Data | | 91 | Master +----------+ | +---+---------> || Port | | 92 | Interface | | || 1 | | 93 | +--------------+ | || | | 94 | | || | +----------+ | 95 | | Data Port |------------+ | | 96 | | 2 || R Channel | Slave | 97 | | R Channel || | Interface | 98 | | (Data) || | 1 | 99 | +--------------+ Clock Signal | L + R | 100 | +---------------------------> | (Data) | 101 +--------------------+ | | 102 +----------------+ 103 104Example 5: Stereo Stream with L and R channel is rendered by 2 Masters, each 105rendering one channel, and is received by two different Slaves, each 106receiving one channel. Both Masters and both Slaves are using single port. :: 107 108 +---------------+ Clock Signal +---------------+ 109 | Master +----------------------------------+ Slave | 110 | Interface | | Interface | 111 | 1 | | 1 | 112 | | Data Signal | | 113 | L +----------------------------------+ L | 114 | (Data) | Data Direction | (Data) | 115 +---------------+ +-----------------------> +---------------+ 116 117 +---------------+ Clock Signal +---------------+ 118 | Master +----------------------------------+ Slave | 119 | Interface | | Interface | 120 | 2 | | 2 | 121 | | Data Signal | | 122 | R +----------------------------------+ R | 123 | (Data) | Data Direction | (Data) | 124 +---------------+ +-----------------------> +---------------+ 125 126Note: In multi-link cases like above, to lock, one would acquire a global 127lock and then go on locking bus instances. But, in this case the caller 128framework(ASoC DPCM) guarantees that stream operations on a card are 129always serialized. So, there is no race condition and hence no need for 130global lock. 131 132SoundWire Stream Management flow 133================================ 134 135Stream definitions 136------------------ 137 138 (1) Current stream: This is classified as the stream on which operation has 139 to be performed like prepare, enable, disable, de-prepare etc. 140 141 (2) Active stream: This is classified as the stream which is already active 142 on Bus other than current stream. There can be multiple active streams 143 on the Bus. 144 145SoundWire Bus manages stream operations for each stream getting 146rendered/captured on the SoundWire Bus. This section explains Bus operations 147done for each of the stream allocated/released on Bus. Following are the 148stream states maintained by the Bus for each of the audio stream. 149 150 151SoundWire stream states 152----------------------- 153 154Below shows the SoundWire stream states and state transition diagram. :: 155 156 +-----------+ +------------+ +----------+ +----------+ 157 | ALLOCATED +---->| CONFIGURED +---->| PREPARED +---->| ENABLED | 158 | STATE | | STATE | | STATE | | STATE | 159 +-----------+ +------------+ +----------+ +----+-----+ 160 ^ 161 | 162 | 163 v 164 +----------+ +------------+ +----+-----+ 165 | RELEASED |<----------+ DEPREPARED |<-------+ DISABLED | 166 | STATE | | STATE | | STATE | 167 +----------+ +------------+ +----------+ 168 169NOTE: State transition between prepare and deprepare is supported in Spec 170but not in the software (subsystem) 171 172NOTE2: Stream state transition checks need to be handled by caller 173framework, for example ALSA/ASoC. No checks for stream transition exist in 174SoundWire subsystem. 175 176Stream State Operations 177----------------------- 178 179Below section explains the operations done by the Bus on Master(s) and 180Slave(s) as part of stream state transitions. 181 182SDW_STREAM_ALLOCATED 183~~~~~~~~~~~~~~~~~~~~ 184 185Allocation state for stream. This is the entry state 186of the stream. Operations performed before entering in this state: 187 188 (1) A stream runtime is allocated for the stream. This stream 189 runtime is used as a reference for all the operations performed 190 on the stream. 191 192 (2) The resources required for holding stream runtime information are 193 allocated and initialized. This holds all stream related information 194 such as stream type (PCM/PDM) and parameters, Master and Slave 195 interface associated with the stream, stream state etc. 196 197After all above operations are successful, stream state is set to 198``SDW_STREAM_ALLOCATED``. 199 200Bus implements below API for allocate a stream which needs to be called once 201per stream. From ASoC DPCM framework, this stream state maybe linked to 202.startup() operation. 203 204 .. code-block:: c 205 206 int sdw_alloc_stream(char * stream_name); 207 208 209SDW_STREAM_CONFIGURED 210~~~~~~~~~~~~~~~~~~~~~ 211 212Configuration state of stream. Operations performed before entering in 213this state: 214 215 (1) The resources allocated for stream information in SDW_STREAM_ALLOCATED 216 state are updated here. This includes stream parameters, Master(s) 217 and Slave(s) runtime information associated with current stream. 218 219 (2) All the Master(s) and Slave(s) associated with current stream provide 220 the port information to Bus which includes port numbers allocated by 221 Master(s) and Slave(s) for current stream and their channel mask. 222 223After all above operations are successful, stream state is set to 224``SDW_STREAM_CONFIGURED``. 225 226Bus implements below APIs for CONFIG state which needs to be called by 227the respective Master(s) and Slave(s) associated with stream. These APIs can 228only be invoked once by respective Master(s) and Slave(s). From ASoC DPCM 229framework, this stream state is linked to .hw_params() operation. 230 231 .. code-block:: c 232 233 int sdw_stream_add_master(struct sdw_bus * bus, 234 struct sdw_stream_config * stream_config, 235 struct sdw_ports_config * ports_config, 236 struct sdw_stream_runtime * stream); 237 238 int sdw_stream_add_slave(struct sdw_slave * slave, 239 struct sdw_stream_config * stream_config, 240 struct sdw_ports_config * ports_config, 241 struct sdw_stream_runtime * stream); 242 243 244SDW_STREAM_PREPARED 245~~~~~~~~~~~~~~~~~~~ 246 247Prepare state of stream. Operations performed before entering in this state: 248 249 (1) Bus parameters such as bandwidth, frame shape, clock frequency, 250 are computed based on current stream as well as already active 251 stream(s) on Bus. Re-computation is required to accommodate current 252 stream on the Bus. 253 254 (2) Transport and port parameters of all Master(s) and Slave(s) port(s) are 255 computed for the current as well as already active stream based on frame 256 shape and clock frequency computed in step 1. 257 258 (3) Computed Bus and transport parameters are programmed in Master(s) and 259 Slave(s) registers. The banked registers programming is done on the 260 alternate bank (bank currently unused). Port(s) are enabled for the 261 already active stream(s) on the alternate bank (bank currently unused). 262 This is done in order to not disrupt already active stream(s). 263 264 (4) Once all the values are programmed, Bus initiates switch to alternate 265 bank where all new values programmed gets into effect. 266 267 (5) Ports of Master(s) and Slave(s) for current stream are prepared by 268 programming PrepareCtrl register. 269 270After all above operations are successful, stream state is set to 271``SDW_STREAM_PREPARED``. 272 273Bus implements below API for PREPARE state which needs to be called once per 274stream. From ASoC DPCM framework, this stream state is linked to 275.prepare() operation. 276 277 .. code-block:: c 278 279 int sdw_prepare_stream(struct sdw_stream_runtime * stream); 280 281 282SDW_STREAM_ENABLED 283~~~~~~~~~~~~~~~~~~ 284 285Enable state of stream. The data port(s) are enabled upon entering this state. 286Operations performed before entering in this state: 287 288 (1) All the values computed in SDW_STREAM_PREPARED state are programmed 289 in alternate bank (bank currently unused). It includes programming of 290 already active stream(s) as well. 291 292 (2) All the Master(s) and Slave(s) port(s) for the current stream are 293 enabled on alternate bank (bank currently unused) by programming 294 ChannelEn register. 295 296 (3) Once all the values are programmed, Bus initiates switch to alternate 297 bank where all new values programmed gets into effect and port(s) 298 associated with current stream are enabled. 299 300After all above operations are successful, stream state is set to 301``SDW_STREAM_ENABLED``. 302 303Bus implements below API for ENABLE state which needs to be called once per 304stream. From ASoC DPCM framework, this stream state is linked to 305.trigger() start operation. 306 307 .. code-block:: c 308 309 int sdw_enable_stream(struct sdw_stream_runtime * stream); 310 311SDW_STREAM_DISABLED 312~~~~~~~~~~~~~~~~~~~ 313 314Disable state of stream. The data port(s) are disabled upon exiting this state. 315Operations performed before entering in this state: 316 317 (1) All the Master(s) and Slave(s) port(s) for the current stream are 318 disabled on alternate bank (bank currently unused) by programming 319 ChannelEn register. 320 321 (2) All the current configuration of Bus and active stream(s) are programmed 322 into alternate bank (bank currently unused). 323 324 (3) Once all the values are programmed, Bus initiates switch to alternate 325 bank where all new values programmed gets into effect and port(s) associated 326 with current stream are disabled. 327 328After all above operations are successful, stream state is set to 329``SDW_STREAM_DISABLED``. 330 331Bus implements below API for DISABLED state which needs to be called once 332per stream. From ASoC DPCM framework, this stream state is linked to 333.trigger() stop operation. 334 335 .. code-block:: c 336 337 int sdw_disable_stream(struct sdw_stream_runtime * stream); 338 339 340SDW_STREAM_DEPREPARED 341~~~~~~~~~~~~~~~~~~~~~ 342 343De-prepare state of stream. Operations performed before entering in this 344state: 345 346 (1) All the port(s) of Master(s) and Slave(s) for current stream are 347 de-prepared by programming PrepareCtrl register. 348 349 (2) The payload bandwidth of current stream is reduced from the total 350 bandwidth requirement of bus and new parameters calculated and 351 applied by performing bank switch etc. 352 353After all above operations are successful, stream state is set to 354``SDW_STREAM_DEPREPARED``. 355 356Bus implements below API for DEPREPARED state which needs to be called once 357per stream. From ASoC DPCM framework, this stream state is linked to 358.trigger() stop operation. 359 360 .. code-block:: c 361 362 int sdw_deprepare_stream(struct sdw_stream_runtime * stream); 363 364 365SDW_STREAM_RELEASED 366~~~~~~~~~~~~~~~~~~~ 367 368Release state of stream. Operations performed before entering in this state: 369 370 (1) Release port resources for all Master(s) and Slave(s) port(s) 371 associated with current stream. 372 373 (2) Release Master(s) and Slave(s) runtime resources associated with 374 current stream. 375 376 (3) Release stream runtime resources associated with current stream. 377 378After all above operations are successful, stream state is set to 379``SDW_STREAM_RELEASED``. 380 381Bus implements below APIs for RELEASE state which needs to be called by 382all the Master(s) and Slave(s) associated with stream. From ASoC DPCM 383framework, this stream state is linked to .hw_free() operation. 384 385 .. code-block:: c 386 387 int sdw_stream_remove_master(struct sdw_bus * bus, 388 struct sdw_stream_runtime * stream); 389 int sdw_stream_remove_slave(struct sdw_slave * slave, 390 struct sdw_stream_runtime * stream); 391 392 393The .shutdown() ASoC DPCM operation calls below Bus API to release 394stream assigned as part of ALLOCATED state. 395 396In .shutdown() the data structure maintaining stream state are freed up. 397 398 .. code-block:: c 399 400 void sdw_release_stream(struct sdw_stream_runtime * stream); 401 402Not Supported 403============= 404 4051. A single port with multiple channels supported cannot be used between two 406streams or across stream. For example a port with 4 channels cannot be used 407to handle 2 independent stereo streams even though it's possible in theory 408in SoundWire. 409