1# SPDX-License-Identifier: GPL-2.0-only
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/usb/renesas,usbhs.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Renesas USBHS (HS-USB) controller
8
9maintainers:
10  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
11
12properties:
13  compatible:
14    oneOf:
15      - items:
16          - const: renesas,usbhs-r7s72100 # RZ/A1
17          - const: renesas,rza1-usbhs
18
19      - items:
20          - const: renesas,usbhs-r7s9210 # RZ/A2
21          - const: renesas,rza2-usbhs
22
23      - items:
24          - enum:
25              - renesas,usbhs-r8a7742  # RZ/G1H
26              - renesas,usbhs-r8a7743  # RZ/G1M
27              - renesas,usbhs-r8a7744  # RZ/G1N
28              - renesas,usbhs-r8a7745  # RZ/G1E
29              - renesas,usbhs-r8a77470 # RZ/G1C
30              - renesas,usbhs-r8a7790  # R-Car H2
31              - renesas,usbhs-r8a7791  # R-Car M2-W
32              - renesas,usbhs-r8a7792  # R-Car V2H
33              - renesas,usbhs-r8a7793  # R-Car M2-N
34              - renesas,usbhs-r8a7794  # R-Car E2
35          - const: renesas,rcar-gen2-usbhs
36
37      - items:
38          - enum:
39              - renesas,usbhs-r8a774a1 # RZ/G2M
40              - renesas,usbhs-r8a774b1 # RZ/G2N
41              - renesas,usbhs-r8a774c0 # RZ/G2E
42              - renesas,usbhs-r8a774e1 # RZ/G2H
43              - renesas,usbhs-r8a7795  # R-Car H3
44              - renesas,usbhs-r8a7796  # R-Car M3-W
45              - renesas,usbhs-r8a77961 # R-Car M3-W+
46              - renesas,usbhs-r8a77965 # R-Car M3-N
47              - renesas,usbhs-r8a77990 # R-Car E3
48              - renesas,usbhs-r8a77995 # R-Car D3
49          - const: renesas,rcar-gen3-usbhs
50
51  reg:
52    maxItems: 1
53
54  clocks:
55    minItems: 1
56    items:
57      - description: USB 2.0 host
58      - description: USB 2.0 peripheral
59      - description: USB 2.0 clock selector
60
61  interrupts:
62    maxItems: 1
63
64  renesas,buswait:
65    $ref: /schemas/types.yaml#/definitions/uint32
66    description: |
67      Integer to use BUSWAIT register.
68
69  renesas,enable-gpio:
70    maxItems: 1
71    description: |
72      gpio specifier to check GPIO determining if USB function should be
73      enabled.
74
75  phys:
76    maxItems: 1
77
78  phy-names:
79    items:
80      - const: usb
81
82  dmas:
83    minItems: 2
84    maxItems: 4
85
86  dma-names:
87    minItems: 2
88    items:
89      - const: ch0
90      - const: ch1
91      - const: ch2
92      - const: ch3
93
94  dr_mode: true
95
96  power-domains:
97    maxItems: 1
98
99  resets:
100    minItems: 1
101    items:
102      - description: USB 2.0 host
103      - description: USB 2.0 peripheral
104
105required:
106  - compatible
107  - reg
108  - clocks
109  - interrupts
110
111additionalProperties: false
112
113examples:
114  - |
115    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
116    #include <dt-bindings/interrupt-controller/arm-gic.h>
117    #include <dt-bindings/power/r8a7790-sysc.h>
118
119    usbhs: usb@e6590000 {
120        compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
121        reg = <0xe6590000 0x100>;
122        interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
123        clocks = <&cpg CPG_MOD 704>;
124    };
125