1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: "http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml#" 5$schema: "http://devicetree.org/meta-schemas/core.yaml#" 6 7title: Mediatek MT6360 Type-C Port Switch and Power Delivery controller DT bindings 8 9maintainers: 10 - ChiYuan Huang <cy_huang@richtek.com> 11 12description: | 13 Mediatek MT6360 is a multi-functional device. It integrates charger, ADC, flash, RGB indicators, 14 regulators (BUCKs/LDOs), and TypeC Port Switch with Power Delivery controller. 15 This document only describes MT6360 Type-C Port Switch and Power Delivery controller. 16 17properties: 18 compatible: 19 enum: 20 - mediatek,mt6360-tcpc 21 22 interrupts: 23 maxItems: 1 24 25 interrupt-names: 26 items: 27 - const: PD_IRQB 28 29 connector: 30 type: object 31 $ref: ../connector/usb-connector.yaml# 32 description: 33 Properties for usb c connector. 34 35additionalProperties: false 36 37required: 38 - compatible 39 - interrupts 40 - interrupt-names 41 42examples: 43 - | 44 #include <dt-bindings/interrupt-controller/irq.h> 45 #include <dt-bindings/usb/pd.h> 46 i2c0 { 47 #address-cells = <1>; 48 #size-cells = <0>; 49 50 mt6360@34 { 51 compatible = "mediatek,mt6360"; 52 reg = <0x34>; 53 interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; 54 interrupt-names = "IRQB"; 55 interrupt-controller; 56 #interrupt-cells = <1>; 57 58 tcpc { 59 compatible = "mediatek,mt6360-tcpc"; 60 interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; 61 interrupt-names = "PD_IRQB"; 62 63 connector { 64 compatible = "usb-c-connector"; 65 label = "USB-C"; 66 data-role = "dual"; 67 power-role = "dual"; 68 try-power-role = "sink"; 69 source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; 70 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; 71 op-sink-microwatt = <10000000>; 72 73 ports { 74 #address-cells = <1>; 75 #size-cells = <0>; 76 77 port@0 { 78 reg = <0>; 79 endpoint { 80 remote-endpoint = <&usb_hs>; 81 }; 82 }; 83 port@1 { 84 reg = <1>; 85 endpoint { 86 remote-endpoint = <&usb_ss>; 87 }; 88 }; 89 port@2 { 90 reg = <2>; 91 endpoint { 92 remote-endpoint = <&dp_aux>; 93 }; 94 }; 95 }; 96 }; 97 }; 98 }; 99 }; 100... 101