1TI DA8xx MUSB
2~~~~~~~~~~~~~
3For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
4
5Required properties:
6~~~~~~~~~~~~~~~~~~~~
7 - compatible : Should be set to "ti,da830-musb".
8
9 - reg: Offset and length of the USB controller register set.
10
11 - interrupts: The USB interrupt number.
12
13 - interrupt-names: Should be set to "mc".
14
15 - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
16
17 - phys: Phandle for the PHY device
18
19 - phy-names: Should be "usb-phy"
20
21Optional properties:
22~~~~~~~~~~~~~~~~~~~~
23 - vbus-supply: Phandle to a regulator providing the USB bus power.
24
25Example:
26	usb_phy: usb-phy {
27		compatible = "ti,da830-usb-phy";
28		#phy-cells = <0>;
29		status = "okay";
30	};
31	usb0: usb@200000 {
32		compatible = "ti,da830-musb";
33		reg =   <0x00200000 0x10000>;
34		interrupts = <58>;
35		interrupt-names = "mc";
36
37		dr_mode = "host";
38		vbus-supply = <&usb_vbus>;
39		phys = <&usb_phy 0>;
40		phy-names = "usb-phy";
41
42		status = "okay";
43	};
44