1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/timer/renesas,rz-mtu3.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Renesas RZ/G2L Multi-Function Timer Pulse Unit 3 (MTU3a) 8 9maintainers: 10 - Biju Das <biju.das.jz@bp.renesas.com> 11 12description: | 13 This hardware block consists of eight 16-bit timer channels and one 14 32- bit timer channel. It supports the following specifications: 15 - Pulse input/output: 28 lines max. 16 - Pulse input 3 lines 17 - Count clock 11 clocks for each channel (14 clocks for MTU0, 12 clocks 18 for MTU2, and 10 clocks for MTU5, four clocks for MTU1-MTU2 combination 19 (when LWA = 1)) 20 - Operating frequency Up to 100 MHz 21 - Available operations [MTU0 to MTU4, MTU6, MTU7, and MTU8] 22 - Waveform output on compare match 23 - Input capture function (noise filter setting available) 24 - Counter-clearing operation 25 - Simultaneous writing to multiple timer counters (TCNT) 26 (excluding MTU8). 27 - Simultaneous clearing on compare match or input capture 28 (excluding MTU8). 29 - Simultaneous input and output to registers in synchronization with 30 counter operations (excluding MTU8). 31 - Up to 12-phase PWM output in combination with synchronous operation 32 (excluding MTU8) 33 - [MTU0 MTU3, MTU4, MTU6, MTU7, and MTU8] 34 - Buffer operation specifiable 35 - [MTU1, MTU2] 36 - Phase counting mode can be specified independently 37 - 32-bit phase counting mode can be specified for interlocked operation 38 of MTU1 and MTU2 (when TMDR3.LWA = 1) 39 - Cascade connection operation available 40 - [MTU3, MTU4, MTU6, and MTU7] 41 - Through interlocked operation of MTU3/4 and MTU6/7, the positive and 42 negative signals in six phases (12 phases in total) can be output in 43 complementary PWM and reset-synchronized PWM operation. 44 - In complementary PWM mode, values can be transferred from buffer 45 registers to temporary registers at crests and troughs of the timer- 46 counter values or when the buffer registers (TGRD registers in MTU4 47 and MTU7) are written to. 48 - Double-buffering selectable in complementary PWM mode. 49 - [MTU3 and MTU4] 50 - Through interlocking with MTU0, a mode for driving AC synchronous 51 motors (brushless DC motors) by using complementary PWM output and 52 reset-synchronized PWM output is settable and allows the selection 53 of two types of waveform output (chopping or level). 54 - [MTU5] 55 - Capable of operation as a dead-time compensation counter. 56 - [MTU0/MTU5, MTU1, MTU2, and MTU8] 57 - 32-bit phase counting mode specifiable by combining MTU1 and MTU2 and 58 through interlocked operation with MTU0/MTU5 and MTU8. 59 - Interrupt-skipping function 60 - In complementary PWM mode, interrupts on crests and troughs of counter 61 values and triggers to start conversion by the A/D converter can be 62 skipped. 63 - Interrupt sources: 43 sources. 64 - Buffer operation: 65 - Automatic transfer of register data (transfer from the buffer 66 register to the timer register). 67 - Trigger generation 68 - A/D converter start triggers can be generated 69 - A/D converter start request delaying function enables A/D converter 70 to be started with any desired timing and to be synchronized with 71 PWM output. 72 - Low power consumption function 73 - The MTU3a can be placed in the module-stop state. 74 75 There are two phase counting modes. 16-bit phase counting mode in which 76 MTU1 and MTU2 operate independently, and cascade connection 32-bit phase 77 counting mode in which MTU1 and MTU2 are cascaded. 78 79 In phase counting mode, the phase difference between two external input 80 clocks is detected and the corresponding TCNT is incremented or 81 decremented. 82 The below counters are supported 83 count0 - MTU1 16-bit phase counting 84 count1 - MTU2 16-bit phase counting 85 count2 - MTU1+ MTU2 32-bit phase counting 86 87 The module supports PWM mode{1,2}, Reset-synchronized PWM mode and 88 complementary PWM mode{1,2,3}. 89 90 In complementary PWM mode, six positive-phase and six negative-phase PWM 91 waveforms (12 phases in total) with dead time can be output by 92 combining MTU{3,4} and MTU{6,7}. 93 94 The below pwm channels are supported in pwm mode 1. 95 pwm0 - MTU0.MTIOC0A PWM mode 1 96 pwm1 - MTU0.MTIOC0C PWM mode 1 97 pwm2 - MTU1.MTIOC1A PWM mode 1 98 pwm3 - MTU2.MTIOC2A PWM mode 1 99 pwm4 - MTU3.MTIOC3A PWM mode 1 100 pwm5 - MTU3.MTIOC3C PWM mode 1 101 pwm6 - MTU4.MTIOC4A PWM mode 1 102 pwm7 - MTU4.MTIOC4C PWM mode 1 103 pwm8 - MTU6.MTIOC6A PWM mode 1 104 pwm9 - MTU6.MTIOC6C PWM mode 1 105 pwm10 - MTU7.MTIOC7A PWM mode 1 106 pwm11 - MTU7.MTIOC7C PWM mode 1 107 108properties: 109 compatible: 110 items: 111 - enum: 112 - renesas,r9a07g044-mtu3 # RZ/G2{L,LC} 113 - renesas,r9a07g054-mtu3 # RZ/V2L 114 - const: renesas,rz-mtu3 115 116 reg: 117 maxItems: 1 118 119 interrupts: 120 items: 121 - description: MTU0.TGRA input capture/compare match 122 - description: MTU0.TGRB input capture/compare match 123 - description: MTU0.TGRC input capture/compare match 124 - description: MTU0.TGRD input capture/compare match 125 - description: MTU0.TCNT overflow 126 - description: MTU0.TGRE compare match 127 - description: MTU0.TGRF compare match 128 - description: MTU1.TGRA input capture/compare match 129 - description: MTU1.TGRB input capture/compare match 130 - description: MTU1.TCNT overflow 131 - description: MTU1.TCNT underflow 132 - description: MTU2.TGRA input capture/compare match 133 - description: MTU2.TGRB input capture/compare match 134 - description: MTU2.TCNT overflow 135 - description: MTU2.TCNT underflow 136 - description: MTU3.TGRA input capture/compare match 137 - description: MTU3.TGRB input capture/compare match 138 - description: MTU3.TGRC input capture/compare match 139 - description: MTU3.TGRD input capture/compare match 140 - description: MTU3.TCNT overflow 141 - description: MTU4.TGRA input capture/compare match 142 - description: MTU4.TGRB input capture/compare match 143 - description: MTU4.TGRC input capture/compare match 144 - description: MTU4.TGRD input capture/compare match 145 - description: MTU4.TCNT overflow/underflow 146 - description: MTU5.TGRU input capture/compare match 147 - description: MTU5.TGRV input capture/compare match 148 - description: MTU5.TGRW input capture/compare match 149 - description: MTU6.TGRA input capture/compare match 150 - description: MTU6.TGRB input capture/compare match 151 - description: MTU6.TGRC input capture/compare match 152 - description: MTU6.TGRD input capture/compare match 153 - description: MTU6.TCNT overflow 154 - description: MTU7.TGRA input capture/compare match 155 - description: MTU7.TGRB input capture/compare match 156 - description: MTU7.TGRC input capture/compare match 157 - description: MTU7.TGRD input capture/compare match 158 - description: MTU7.TCNT overflow/underflow 159 - description: MTU8.TGRA input capture/compare match 160 - description: MTU8.TGRB input capture/compare match 161 - description: MTU8.TGRC input capture/compare match 162 - description: MTU8.TGRD input capture/compare match 163 - description: MTU8.TCNT overflow 164 - description: MTU8.TCNT underflow 165 166 interrupt-names: 167 items: 168 - const: tgia0 169 - const: tgib0 170 - const: tgic0 171 - const: tgid0 172 - const: tciv0 173 - const: tgie0 174 - const: tgif0 175 - const: tgia1 176 - const: tgib1 177 - const: tciv1 178 - const: tciu1 179 - const: tgia2 180 - const: tgib2 181 - const: tciv2 182 - const: tciu2 183 - const: tgia3 184 - const: tgib3 185 - const: tgic3 186 - const: tgid3 187 - const: tciv3 188 - const: tgia4 189 - const: tgib4 190 - const: tgic4 191 - const: tgid4 192 - const: tciv4 193 - const: tgiu5 194 - const: tgiv5 195 - const: tgiw5 196 - const: tgia6 197 - const: tgib6 198 - const: tgic6 199 - const: tgid6 200 - const: tciv6 201 - const: tgia7 202 - const: tgib7 203 - const: tgic7 204 - const: tgid7 205 - const: tciv7 206 - const: tgia8 207 - const: tgib8 208 - const: tgic8 209 - const: tgid8 210 - const: tciv8 211 - const: tciu8 212 213 clocks: 214 maxItems: 1 215 216 power-domains: 217 maxItems: 1 218 219 resets: 220 maxItems: 1 221 222 "#pwm-cells": 223 const: 2 224 225required: 226 - compatible 227 - reg 228 - interrupts 229 - interrupt-names 230 - clocks 231 - power-domains 232 - resets 233 234additionalProperties: false 235 236examples: 237 - | 238 #include <dt-bindings/clock/r9a07g044-cpg.h> 239 #include <dt-bindings/interrupt-controller/arm-gic.h> 240 241 mtu3: timer@10001200 { 242 compatible = "renesas,r9a07g044-mtu3", "renesas,rz-mtu3"; 243 reg = <0x10001200 0xb00>; 244 interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>, 245 <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>, 246 <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>, 247 <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>, 248 <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, 249 <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, 250 <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>, 251 <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>, 252 <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>, 253 <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>, 254 <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>, 255 <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>, 256 <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>, 257 <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>, 258 <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>, 259 <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>, 260 <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>, 261 <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>, 262 <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, 263 <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>, 264 <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>, 265 <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>, 266 <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>, 267 <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>, 268 <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>, 269 <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>, 270 <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>, 271 <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>, 272 <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>, 273 <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>, 274 <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>, 275 <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>, 276 <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>, 277 <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>, 278 <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>, 279 <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>, 280 <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>, 281 <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>, 282 <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, 283 <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, 284 <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>, 285 <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>, 286 <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, 287 <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; 288 interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tciv0", "tgie0", 289 "tgif0", 290 "tgia1", "tgib1", "tciv1", "tciu1", 291 "tgia2", "tgib2", "tciv2", "tciu2", 292 "tgia3", "tgib3", "tgic3", "tgid3", "tciv3", 293 "tgia4", "tgib4", "tgic4", "tgid4", "tciv4", 294 "tgiu5", "tgiv5", "tgiw5", 295 "tgia6", "tgib6", "tgic6", "tgid6", "tciv6", 296 "tgia7", "tgib7", "tgic7", "tgid7", "tciv7", 297 "tgia8", "tgib8", "tgic8", "tgid8", "tciv8", "tciu8"; 298 clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; 299 power-domains = <&cpg>; 300 resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; 301 #pwm-cells = <2>; 302 }; 303