1* Marvell Armada 370/375/380/XP thermal management
2
3Required properties:
4
5- compatible: Should be set to one of the following:
6    * marvell,armada370-thermal
7    * marvell,armada375-thermal
8    * marvell,armada380-thermal
9    * marvell,armadaxp-thermal
10    * marvell,armada-ap806-thermal
11    * marvell,armada-ap807-thermal
12    * marvell,armada-cp110-thermal
13
14Note: these bindings are deprecated for AP806/CP110 and should instead
15follow the rules described in:
16Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
17Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
18
19- reg: Device's register space.
20  Two entries are expected, see the examples below. The first one points
21  to the status register (4B). The second one points to the control
22  registers (8B).
23  Note: The compatibles marvell,armada370-thermal,
24  marvell,armada380-thermal, and marvell,armadaxp-thermal must point to
25  "control MSB/control 1", with size of 4 (deprecated binding), or point
26  to "control LSB/control 0" with size of 8 (current binding). All other
27  compatibles must point to "control LSB/control 0" with size of 8.
28
29Examples:
30
31	/* Legacy bindings */
32	thermal@d0018300 {
33		compatible = "marvell,armada370-thermal";
34		reg = <0xd0018300 0x4
35		       0xd0018304 0x4>;
36	};
37
38	ap_thermal: thermal@6f8084 {
39		compatible = "marvell,armada-ap806-thermal";
40		reg = <0x6f808C 0x4>,
41		      <0x6f8084 0x8>;
42	};
43