1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2
3%YAML 1.2
4---
5$id: "http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#"
6$schema: "http://devicetree.org/meta-schemas/core.yaml#"
7
8title: Spreadtrum ADI controller
9
10maintainers:
11  - Orson Zhai <orsonzhai@gmail.com>
12  - Baolin Wang <baolin.wang7@gmail.com>
13  - Chunyan Zhang <zhang.lyra@gmail.com>
14
15description: |
16  ADI is the abbreviation of Anolog-Digital interface, which is used to access
17  analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
18  framework for its hardware implementation is alike to SPI bus and its timing
19  is compatile to SPI timing.
20
21  ADI controller has 50 channels including 2 software read/write channels and
22  48 hardware channels to access analog chip. For 2 software read/write channels,
23  users should set ADI registers to access analog chip. For hardware channels,
24  we can configure them to allow other hardware components to use it independently,
25  which means we can just link one analog chip address to one hardware channel,
26  then users can access the mapped analog chip address by this hardware channel
27  triggered by hardware components instead of ADI software channels.
28
29  Thus we introduce one property named "sprd,hw-channels" to configure hardware
30  channels, the first value specifies the hardware channel id which is used to
31  transfer data triggered by hardware automatically, and the second value specifies
32  the analog chip address where user want to access by hardware components.
33
34  Since we have multi-subsystems will use unique ADI to access analog chip, when
35  one system is reading/writing data by ADI software channels, that should be under
36  one hardware spinlock protection to prevent other systems from reading/writing
37  data by ADI software channels at the same time, or two parallel routine of setting
38  ADI registers will make ADI controller registers chaos to lead incorrect results.
39  Then we need one hardware spinlock to synchronize between the multiple subsystems.
40
41  The new version ADI controller supplies multiple master channels for different
42  subsystem accessing, that means no need to add hardware spinlock to synchronize,
43  thus change the hardware spinlock support to be optional to keep backward
44  compatibility.
45
46allOf:
47  - $ref: /spi/spi-controller.yaml#
48
49properties:
50  compatible:
51    enum:
52      - sprd,sc9860-adi
53      - sprd,sc9863-adi
54      - sprd,ums512-adi
55
56  reg:
57    maxItems: 1
58
59  hwlocks:
60    maxItems: 1
61
62  hwlock-names:
63    const: adi
64
65  sprd,hw-channels:
66    $ref: /schemas/types.yaml#/definitions/uint32-matrix
67    description: A list of hardware channels
68    minItems: 1
69    maxItems: 48
70    items:
71      items:
72        - description: The hardware channel id which is used to transfer data
73            triggered by hardware automatically, channel id 0-1 are for software
74            use, 2-49 are hardware channels.
75          minimum: 2
76          maximum: 49
77        - description: The analog chip address where user want to access by
78            hardware components.
79
80required:
81  - compatible
82  - reg
83  - '#address-cells'
84  - '#size-cells'
85
86unevaluatedProperties: false
87
88examples:
89  - |
90    aon {
91        #address-cells = <2>;
92        #size-cells = <2>;
93
94        adi_bus: spi@40030000 {
95            compatible = "sprd,sc9860-adi";
96            reg = <0 0x40030000 0 0x10000>;
97            hwlocks = <&hwlock1 0>;
98            hwlock-names = "adi";
99            #address-cells = <1>;
100            #size-cells = <0>;
101            sprd,hw-channels = <30 0x8c20>;
102        };
103    };
104...
105