1Lantiq Synchronous Serial Controller (SSC) SPI master driver
2
3Required properties:
4- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi"
5- #address-cells: see spi-bus.txt
6- #size-cells: see spi-bus.txt
7- reg: address and length of the spi master registers
8- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt.
9
10
11Optional properties:
12- clocks: spi clock phandle
13- num-cs: see spi-bus.txt, set to 8 if unset
14- base-cs: the number of the first chip select, set to 1 if unset.
15
16Example:
17
18
19spi: spi@e100800 {
20	compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
21	reg = <0xE100800 0x100>;
22	interrupt-parent = <&icu0>;
23	interrupts = <22 23 24>;
24	interrupt-names = "spi_rx", "spi_tx", "spi_err";
25	#address-cells = <1>;
26	#size-cells = <1>;
27	num-cs = <6>;
28	base-cs = <1>;
29};
30