1# SPDX-License-Identifier: GPL-2.0-only 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/spi/snps,dw-apb-ssi.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface 8 9maintainers: 10 - Mark Brown <broonie@kernel.org> 11 12allOf: 13 - $ref: "spi-controller.yaml#" 14 - if: 15 properties: 16 compatible: 17 contains: 18 enum: 19 - mscc,ocelot-spi 20 - mscc,jaguar2-spi 21 then: 22 properties: 23 reg: 24 minItems: 2 25 - if: 26 properties: 27 compatible: 28 contains: 29 enum: 30 - baikal,bt1-sys-ssi 31 then: 32 properties: 33 mux-controls: 34 maxItems: 1 35 required: 36 - mux-controls 37 else: 38 required: 39 - interrupts 40 41properties: 42 compatible: 43 oneOf: 44 - description: Generic DW SPI Controller 45 enum: 46 - snps,dw-apb-ssi 47 - snps,dwc-ssi-1.01a 48 - description: Microsemi Ocelot/Jaguar2 SoC SPI Controller 49 items: 50 - enum: 51 - mscc,ocelot-spi 52 - mscc,jaguar2-spi 53 - const: snps,dw-apb-ssi 54 - description: Microchip Sparx5 SoC SPI Controller 55 const: microchip,sparx5-spi 56 - description: Amazon Alpine SPI Controller 57 const: amazon,alpine-dw-apb-ssi 58 - description: Renesas RZ/N1 SPI Controller 59 items: 60 - const: renesas,rzn1-spi 61 - const: snps,dw-apb-ssi 62 - description: Intel Keem Bay SPI Controller 63 const: intel,keembay-ssi 64 - description: Baikal-T1 SPI Controller 65 const: baikal,bt1-ssi 66 - description: Baikal-T1 System Boot SPI Controller 67 const: baikal,bt1-sys-ssi 68 - description: Canaan Kendryte K210 SoS SPI Controller 69 const: canaan,k210-spi 70 - description: Renesas RZ/N1 SPI Controller 71 items: 72 - enum: 73 - renesas,r9a06g032-spi # RZ/N1D 74 - renesas,r9a06g033-spi # RZ/N1S 75 - const: renesas,rzn1-spi # RZ/N1 76 77 reg: 78 minItems: 1 79 items: 80 - description: DW APB SSI controller memory mapped registers 81 - description: SPI MST region map or directly mapped SPI ROM 82 83 interrupts: 84 maxItems: 1 85 86 clocks: 87 minItems: 1 88 items: 89 - description: SPI Controller reference clock source 90 - description: APB interface clock source 91 92 clock-names: 93 minItems: 1 94 items: 95 - const: ssi_clk 96 - const: pclk 97 98 resets: 99 maxItems: 1 100 101 reset-names: 102 const: spi 103 104 reg-io-width: 105 $ref: /schemas/types.yaml#/definitions/uint32 106 description: I/O register width (in bytes) implemented by this device 107 default: 4 108 enum: [ 2, 4 ] 109 110 num-cs: 111 default: 4 112 minimum: 1 113 maximum: 4 114 115 dmas: 116 items: 117 - description: TX DMA Channel 118 - description: RX DMA Channel 119 120 dma-names: 121 items: 122 - const: tx 123 - const: rx 124 125 rx-sample-delay-ns: 126 default: 0 127 description: Default value of the rx-sample-delay-ns property. 128 This value will be used if the property is not explicitly defined 129 for a SPI slave device. See below. 130 131patternProperties: 132 "^.*@[0-9a-f]+$": 133 type: object 134 properties: 135 reg: 136 minimum: 0 137 maximum: 3 138 139 spi-rx-bus-width: 140 const: 1 141 142 spi-tx-bus-width: 143 const: 1 144 145 rx-sample-delay-ns: 146 description: SPI Rx sample delay offset, unit is nanoseconds. 147 The delay from the default sample time before the actual 148 sample of the rxd input signal occurs. The "rx_sample_delay" 149 is an optional feature of the designware controller, and the 150 upper limit is also subject to controller configuration. 151 152unevaluatedProperties: false 153 154required: 155 - compatible 156 - reg 157 - "#address-cells" 158 - "#size-cells" 159 - clocks 160 161examples: 162 - | 163 spi@fff00000 { 164 compatible = "snps,dw-apb-ssi"; 165 reg = <0xfff00000 0x1000>; 166 #address-cells = <1>; 167 #size-cells = <0>; 168 interrupts = <0 154 4>; 169 clocks = <&spi_m_clk>; 170 num-cs = <2>; 171 cs-gpios = <&gpio0 13 0>, 172 <&gpio0 14 0>; 173 rx-sample-delay-ns = <3>; 174 spi-flash@1 { 175 compatible = "spi-nand"; 176 reg = <1>; 177 rx-sample-delay-ns = <7>; 178 }; 179 }; 180 - | 181 spi@1f040100 { 182 compatible = "baikal,bt1-sys-ssi"; 183 reg = <0x1f040100 0x900>, 184 <0x1c000000 0x1000000>; 185 #address-cells = <1>; 186 #size-cells = <0>; 187 mux-controls = <&boot_mux>; 188 clocks = <&ccu_sys>; 189 clock-names = "ssi_clk"; 190 }; 191... 192