1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Quad Serial Peripheral Interface (QSPI)
8
9maintainers:
10  - Bjorn Andersson <bjorn.andersson@linaro.org>
11
12description: The QSPI controller allows SPI protocol communication in single,
13  dual, or quad wire transmission modes for read/write access to slaves such
14  as NOR flash.
15
16allOf:
17  - $ref: /schemas/spi/spi-controller.yaml#
18
19properties:
20  compatible:
21    items:
22      - enum:
23          - qcom,sc7180-qspi
24          - qcom,sc7280-qspi
25          - qcom,sdm845-qspi
26
27      - const: qcom,qspi-v1
28
29  reg:
30    maxItems: 1
31
32  iommus:
33    maxItems: 1
34
35  interrupts:
36    maxItems: 1
37
38  clock-names:
39    items:
40      - const: iface
41      - const: core
42
43  clocks:
44    items:
45      - description: AHB clock
46      - description: QSPI core clock
47
48  interconnects:
49    minItems: 1
50    maxItems: 2
51
52  interconnect-names:
53    minItems: 1
54    items:
55      - const: qspi-config
56      - const: qspi-memory
57
58  operating-points-v2: true
59
60  power-domains:
61    maxItems: 1
62
63required:
64  - compatible
65  - reg
66  - interrupts
67  - clock-names
68  - clocks
69
70unevaluatedProperties: false
71
72examples:
73  - |
74    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
75    #include <dt-bindings/interrupt-controller/arm-gic.h>
76
77    soc: soc {
78        #address-cells = <2>;
79        #size-cells = <2>;
80
81        qspi: spi@88df000 {
82            compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
83            reg = <0 0x88df000 0 0x600>;
84            #address-cells = <1>;
85            #size-cells = <0>;
86            interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
87            clock-names = "iface", "core";
88            clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
89                         <&gcc GCC_QSPI_CORE_CLK>;
90
91            flash@0 {
92                compatible = "jedec,spi-nor";
93                reg = <0>;
94                spi-max-frequency = <25000000>;
95                spi-tx-bus-width = <2>;
96                spi-rx-bus-width = <2>;
97            };
98        };
99    };
100...
101