1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2
3%YAML 1.2
4---
5$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
6$schema: "http://devicetree.org/meta-schemas/core.yaml#"
7
8title: Qualcomm Quad Serial Peripheral Interface (QSPI)
9
10maintainers:
11  - Mukesh Savaliya <msavaliy@codeaurora.org>
12  - Akash Asthana <akashast@codeaurora.org>
13
14description: The QSPI controller allows SPI protocol communication in single,
15  dual, or quad wire transmission modes for read/write access to slaves such
16  as NOR flash.
17
18allOf:
19  - $ref: /spi/spi-controller.yaml#
20
21properties:
22  compatible:
23    items:
24      - const: qcom,sdm845-qspi
25      - const: qcom,qspi-v1
26
27  reg:
28    maxItems: 1
29
30  interrupts:
31    maxItems: 1
32
33  clock-names:
34    items:
35      - const: iface
36      - const: core
37
38  clocks:
39    items:
40      - description: AHB clock
41      - description: QSPI core clock
42
43  interconnects:
44    minItems: 1
45    maxItems: 2
46
47  interconnect-names:
48    items:
49      - const: qspi-config
50      - const: qspi-memory
51
52required:
53  - compatible
54  - reg
55  - interrupts
56  - clock-names
57  - clocks
58
59examples:
60  - |
61    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
62    #include <dt-bindings/interrupt-controller/arm-gic.h>
63
64    soc: soc {
65        #address-cells = <2>;
66        #size-cells = <2>;
67
68        qspi: spi@88df000 {
69            compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
70            reg = <0 0x88df000 0 0x600>;
71            #address-cells = <1>;
72            #size-cells = <0>;
73            interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
74            clock-names = "iface", "core";
75            clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
76                         <&gcc GCC_QSPI_CORE_CLK>;
77
78            flash@0 {
79                compatible = "jedec,spi-nor";
80                reg = <0>;
81                spi-max-frequency = <25000000>;
82                spi-tx-bus-width = <2>;
83                spi-rx-bus-width = <2>;
84            };
85
86        };
87    };
88...
89