1* Nuvoton FLASH Interface Unit (FIU) SPI Controller
2
3NPCM FIU supports single, dual and quad communication interface.
4
5The NPCM7XX supports three FIU modules,
6FIU0 and FIUx supports two chip selects,
7FIU3 support four chip select.
8
9The NPCM8XX supports four FIU modules,
10FIU0 and FIUx supports two chip selects,
11FIU1 and FIU3 supports four chip selects.
12
13Required properties:
14  - compatible : "nuvoton,npcm750-fiu" for Poleg NPCM7XX BMC
15			     "nuvoton,npcm845-fiu" for Arbel NPCM8XX BMC
16  - #address-cells : should be 1.
17  - #size-cells : should be 0.
18  - reg : the first contains the register location and length,
19          the second contains the memory mapping address and length
20  - reg-names: Should contain the reg names "control" and "memory"
21  - clocks : phandle of FIU reference clock.
22
23Required properties in case the pins can be muxed:
24  - pinctrl-names : a pinctrl state named "default" must be defined.
25  - pinctrl-0 : phandle referencing pin configuration of the device.
26
27Optional property:
28  - nuvoton,spix-mode: enable spix-mode for an expansion bus to an ASIC or CPLD.
29
30Aliases:
31- All the FIU controller nodes should be represented in the aliases node using
32  the following format 'fiu{n}' where n is a unique number for the alias.
33  In the NPCM7XX BMC:
34  		fiu0 represent fiu 0 controller
35  		fiu1 represent fiu 3 controller
36  		fiu2 represent fiu x controller
37
38  In the NPCM8XX BMC:
39  		fiu0 represent fiu 0 controller
40  		fiu1 represent fiu 1 controller
41  		fiu2 represent fiu 3 controller
42  		fiu3 represent fiu x controller
43
44Example:
45fiu3: spi@c00000000 {
46	compatible = "nuvoton,npcm750-fiu";
47	#address-cells = <1>;
48	#size-cells = <0>;
49	reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>;
50	reg-names = "control", "memory";
51	clocks = <&clk NPCM7XX_CLK_AHB>;
52	pinctrl-names = "default";
53	pinctrl-0 = <&spi3_pins>;
54	flash@0 {
55			...
56	};
57};
58
59