xref: /openbmc/linux/Documentation/devicetree/bindings/spi/cdns,xspi.yaml (revision 99a7fa0e)

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2020-21 Cadence
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/cdns,xspi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Cadence XSPI Controller

maintainers:
  - Parshuram Thombare <pthombar@cadence.com>

description: |
  The XSPI controller allows SPI protocol communication in
  single, dual, quad or octal wire transmission modes for
  read/write access to slaves such as SPI-NOR flash.

allOf:
  - $ref: spi-controller.yaml#

properties:
  compatible:
    const: cdns,xspi-nor

  reg:
    items:
      - description: address and length of the controller register set
      - description: address and length of the Slave DMA data port
      - description: address and length of the auxiliary registers

  reg-names:
    items:
      - const: io
      - const: sdma
      - const: aux

  interrupts:
    maxItems: 1

required:
  - compatible
  - reg
  - interrupts

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    bus {
        #address-cells = <2>;
        #size-cells = <2>;

        xspi: spi@a0010000 {
            #address-cells = <1>;
            #size-cells = <0>;
            compatible = "cdns,xspi-nor";
            reg = <0x0 0xa0010000 0x0 0x1040>,
                  <0x0 0xb0000000 0x0 0x1000>,
                  <0x0 0xa0020000 0x0 0x100>;
            reg-names = "io", "sdma", "aux";
            interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-parent = <&gic>;

            flash@0 {
                compatible = "jedec,spi-nor";
                spi-max-frequency = <75000000>;
                reg = <0>;
            };

            flash@1 {
                compatible = "jedec,spi-nor";
                spi-max-frequency = <75000000>;
                reg = <1>;
            };
        };
    };