1050a0e1fSMatt PorterTDA7419 audio processor 2050a0e1fSMatt Porter 3050a0e1fSMatt PorterThis device supports I2C only. 4050a0e1fSMatt Porter 5050a0e1fSMatt PorterRequired properties: 6050a0e1fSMatt Porter 7050a0e1fSMatt Porter- compatible : "st,tda7419" 8050a0e1fSMatt Porter- reg : the I2C address of the device. 9050a0e1fSMatt Porter- vdd-supply : a regulator spec for the common power supply (8-10V) 10050a0e1fSMatt Porter 11050a0e1fSMatt PorterOptional properties: 12050a0e1fSMatt Porter 13050a0e1fSMatt Porter- st,mute-gpios : a GPIO spec for the MUTE pin. 14050a0e1fSMatt Porter 15050a0e1fSMatt PorterPins on the device (for linking into audio routes): 16050a0e1fSMatt Porter 17050a0e1fSMatt Porter * SE3L 18050a0e1fSMatt Porter * SE3R 19050a0e1fSMatt Porter * SE2L 20050a0e1fSMatt Porter * SE2R 21050a0e1fSMatt Porter * SE1L 22050a0e1fSMatt Porter * SE1R 23050a0e1fSMatt Porter * DIFFL 24050a0e1fSMatt Porter * DIFFR 25050a0e1fSMatt Porter * MIX 26050a0e1fSMatt Porter * OUTLF 27050a0e1fSMatt Porter * OUTRF 28050a0e1fSMatt Porter * OUTLR 29050a0e1fSMatt Porter * OUTRR 30050a0e1fSMatt Porter * OUTSW 31050a0e1fSMatt Porter 32050a0e1fSMatt PorterExample: 33050a0e1fSMatt Porter 34050a0e1fSMatt Porterap: tda7419@44 { 35050a0e1fSMatt Porter compatible = "st,tda7419"; 36050a0e1fSMatt Porter reg = <0x44>; 37050a0e1fSMatt Porter vdd-supply = <&vdd_9v0_reg>; 38050a0e1fSMatt Porter}; 39