1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: STMicroelectronics STM32 Serial Audio Interface (SAI)
8
9maintainers:
10  - Olivier Moysan <olivier.moysan@foss.st.com>
11
12description:
13  The SAI interface (Serial Audio Interface) offers a wide set of audio
14  protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
15  The SAI contains two independent audio sub-blocks. Each sub-block has
16  its own clock generator and I/O lines controller.
17
18properties:
19  compatible:
20    enum:
21      - st,stm32f4-sai
22      - st,stm32h7-sai
23
24  reg:
25    items:
26      - description: Base address and size of SAI common register set.
27      - description: Base address and size of SAI identification register set.
28    minItems: 1
29
30  ranges:
31    maxItems: 1
32
33  interrupts:
34    maxItems: 1
35
36  resets:
37    maxItems: 1
38
39  "#address-cells":
40    const: 1
41
42  "#size-cells":
43    const: 1
44
45  clocks:
46    maxItems: 3
47
48  clock-names:
49    maxItems: 3
50
51required:
52  - compatible
53  - reg
54  - ranges
55  - "#address-cells"
56  - "#size-cells"
57  - clocks
58  - clock-names
59
60patternProperties:
61  "^audio-controller@[0-9a-f]+$":
62    type: object
63    additionalProperties: false
64    description:
65      Two subnodes corresponding to SAI sub-block instances A et B
66      can be defined. Subnode can be omitted for unsused sub-block.
67
68    properties:
69      compatible:
70        description: Compatible for SAI sub-block A or B.
71        pattern: "st,stm32-sai-sub-[ab]"
72
73      "#sound-dai-cells":
74        const: 0
75
76      reg:
77        maxItems: 1
78
79      clocks:
80        items:
81          - description: sai_ck clock feeding the internal clock generator.
82          - description: MCLK clock from a SAI set as master clock provider.
83        minItems: 1
84
85      clock-names:
86        items:
87          - const: sai_ck
88          - const: MCLK
89        minItems: 1
90
91      dmas:
92        maxItems: 1
93
94      dma-names:
95        description: |
96          rx: SAI sub-block is configured as a capture DAI.
97          tx: SAI sub-block is configured as a playback DAI.
98        enum: [ rx, tx ]
99
100      st,sync:
101        description:
102          Configure the SAI sub-block as slave of another SAI sub-block.
103          By default SAI sub-block is in asynchronous mode.
104          Must contain the phandle and index of the SAI sub-block providing
105          the synchronization.
106        $ref: /schemas/types.yaml#/definitions/phandle-array
107        items:
108          - items:
109              - description: phandle of the SAI sub-block
110              - description: index of the SAI sub-block
111
112      st,iec60958:
113        description:
114          If set, support S/PDIF IEC6958 protocol for playback.
115          IEC60958 protocol is not available for capture.
116          By default, custom protocol is assumed, meaning that protocol is
117          configured according to protocol defined in related DAI link node,
118          such as i2s, left justified, right justified, dsp and pdm protocols.
119        $ref: /schemas/types.yaml#/definitions/flag
120
121      "#clock-cells":
122        description: Configure the SAI device as master clock provider.
123        const: 0
124
125      port:
126        $ref: audio-graph-port.yaml#
127        unevaluatedProperties: false
128
129    required:
130      - compatible
131      - "#sound-dai-cells"
132      - reg
133      - clocks
134      - clock-names
135      - dmas
136      - dma-names
137
138allOf:
139  - if:
140      properties:
141        compatible:
142          contains:
143            const: st,stm32f4-sai
144    then:
145      properties:
146        clocks:
147          items:
148            - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
149            - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.
150
151        clock-names:
152          items:
153            - const: x8k
154            - const: x11k
155    else:
156      properties:
157        clocks:
158          items:
159            - description: pclk feeds the peripheral bus interface.
160            - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
161            - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.
162
163        clock-names:
164          items:
165            - const: pclk
166            - const: x8k
167            - const: x11k
168
169additionalProperties: false
170
171examples:
172  - |
173    #include <dt-bindings/interrupt-controller/arm-gic.h>
174    #include <dt-bindings/clock/stm32mp1-clks.h>
175    #include <dt-bindings/reset/stm32mp1-resets.h>
176    sai2: sai@4400b000 {
177      compatible = "st,stm32h7-sai";
178      #address-cells = <1>;
179      #size-cells = <1>;
180      ranges = <0 0x4400b000 0x400>;
181      reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
182      clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
183      clock-names = "pclk", "x8k", "x11k";
184      pinctrl-names = "default", "sleep";
185      pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
186      pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
187
188      sai2a: audio-controller@4400b004 {
189        #sound-dai-cells = <0>;
190        compatible = "st,stm32-sai-sub-a";
191        reg = <0x4 0x1c>;
192        dmas = <&dmamux1 89 0x400 0x01>;
193        dma-names = "tx";
194        clocks = <&rcc SAI2_K>;
195        clock-names = "sai_ck";
196      };
197    };
198
199...
200