1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/sound/maxim,max98925.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Maxim Integrated MAX98925/MAX98926/MAX98927 speaker amplifier
8
9maintainers:
10  - Ryan Lee <ryans.lee@maximintegrated.com>
11
12properties:
13  compatible:
14    enum:
15      - maxim,max98925
16      - maxim,max98926
17      - maxim,max98927
18
19  reg:
20    maxItems: 1
21
22  reset-gpios:
23    maxItems: 1
24
25  '#sound-dai-cells':
26    const: 0
27
28  vmon-slot-no:
29    $ref: /schemas/types.yaml#/definitions/uint32
30    minimum: 0
31    maximum: 30
32    default: 0
33    description:
34      Slot number used to send voltage information or in inteleave mode this
35      will be used as interleave slot.
36
37  imon-slot-no:
38    $ref: /schemas/types.yaml#/definitions/uint32
39    minimum: 0
40    maximum: 30
41    default: 0
42    description:
43      Slot number used to send current information.
44
45  maxim,interleave-mode:
46    type: boolean
47    description:
48      When using two MAX9892X in a system it is possible to create ADC data
49      that will overflow the frame size. When enabled, the Digital Audio
50      Interleave mode provides a means to output VMON and IMON data from two
51      devices on a single DOUT line when running smaller frames sizes such as
52      32 BCLKS per LRCLK or 48 BCLKS per LRCLK.
53
54required:
55  - compatible
56  - reg
57
58allOf:
59  - $ref: dai-common.yaml#
60  - if:
61      properties:
62        compatible:
63          contains:
64            enum:
65              - maxim,max98927
66    then:
67      properties:
68        vmon-slot-no:
69          minimum: 0
70          maximum: 15
71
72        imon-slot-no:
73          minimum: 0
74          maximum: 15
75
76additionalProperties: false
77
78examples:
79  - |
80    i2c {
81        #address-cells = <1>;
82        #size-cells = <0>;
83
84        #include <dt-bindings/gpio/gpio.h>
85        audio-codec@3a {
86            compatible = "maxim,max98927";
87            reg = <0x3a>;
88            #sound-dai-cells = <0>;
89
90            pinctrl-0 = <&speaker_default>;
91            pinctrl-names = "default";
92
93            reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
94
95            vmon-slot-no = <1>;
96            imon-slot-no = <0>;
97        };
98    };
99