1Analog Devices ADAU1701
2
3Required properties:
4
5 - compatible:		Should contain "adi,adau1701"
6 - reg:			The i2c address. Value depends on the state of ADDR0
7			and ADDR1, as wired in hardware.
8
9Optional properties:
10
11 - reset-gpio: 		A GPIO spec to define which pin is connected to the
12			chip's !RESET pin. If specified, the driver will
13			assert a hardware reset at probe time.
14
15Examples:
16
17	i2c_bus {
18		adau1701@34 {
19			compatible = "adi,adau1701";
20			reg = <0x34>;
21			reset-gpio = <&gpio 23 0>;
22		};
23	};
24