xref: /openbmc/linux/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml (revision fa041c4d)

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mutex.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Mediatek mutex

maintainers:
  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
  - Philipp Zabel <p.zabel@pengutronix.de>

description: |
  Mediatek mutex, namely MUTEX, is used to send the triggers signals called
  Start Of Frame (SOF) / End Of Frame (EOF) to each sub-modules on the display
  data path or MDP data path.
  In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects
  the shadow register.
  MUTEX device node must be siblings to the central MMSYS_CONFIG node.
  For a description of the MMSYS_CONFIG binding, see
  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
  for details.

properties:
  compatible:
    enum:
      - mediatek,mt2701-disp-mutex
      - mediatek,mt2712-disp-mutex
      - mediatek,mt6795-disp-mutex
      - mediatek,mt8167-disp-mutex
      - mediatek,mt8173-disp-mutex
      - mediatek,mt8183-disp-mutex
      - mediatek,mt8186-disp-mutex
      - mediatek,mt8186-mdp3-mutex
      - mediatek,mt8188-disp-mutex
      - mediatek,mt8192-disp-mutex
      - mediatek,mt8195-disp-mutex
      - mediatek,mt8195-vpp-mutex
      - mediatek,mt8365-disp-mutex

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  power-domains:
    description: A phandle and PM domain specifier as defined by bindings of
      the power controller specified by phandle. See
      Documentation/devicetree/bindings/power/power-domain.yaml for details.

  clocks:
    items:
      - description: MUTEX Clock

  mediatek,gce-events:
    description:
      The event id which is mapping to the specific hardware event signal
      to gce. The event id is defined in the gce header
      include/dt-bindings/gce/<chip>-gce.h of each chips.
    $ref: /schemas/types.yaml#/definitions/uint32-array

  mediatek,gce-client-reg:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    items:
      items:
        - description: phandle of GCE
        - description: GCE subsys id
        - description: register offset
        - description: register size
    description: The register of client driver can be configured by gce with
      4 arguments defined in this property. Each GCE subsys id is mapping to
      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.

allOf:
  - if:
      properties:
        compatible:
          contains:
            enum:
              - mediatek,mt2701-disp-mutex
              - mediatek,mt2712-disp-mutex
              - mediatek,mt6795-disp-mutex
              - mediatek,mt8173-disp-mutex
              - mediatek,mt8186-disp-mutex
              - mediatek,mt8186-mdp3-mutex
              - mediatek,mt8192-disp-mutex
              - mediatek,mt8195-disp-mutex
    then:
      required:
        - clocks


required:
  - compatible
  - reg
  - interrupts
  - power-domains

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/clock/mt8173-clk.h>
    #include <dt-bindings/power/mt8173-power.h>
    #include <dt-bindings/gce/mt8173-gce.h>

    soc {
        #address-cells = <2>;
        #size-cells = <2>;

        mutex: mutex@14020000 {
            compatible = "mediatek,mt8173-disp-mutex";
            reg = <0 0x14020000 0 0x1000>;
            interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
            clocks = <&mmsys CLK_MM_MUTEX_32K>;
            mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
                                  <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
        };
    };