1* Microchip Universal Asynchronous Receiver Transmitter (UART)
2
3Required properties:
4- compatible: Should be "microchip,pic32mzda-uart"
5- reg: Should contain registers location and length
6- interrupts: Should contain interrupt
7- clocks: Phandle to the clock.
8          See: Documentation/devicetree/bindings/clock/clock-bindings.txt
9- pinctrl-names: A pinctrl state names "default" must be defined.
10- pinctrl-0: Phandle referencing pin configuration of the UART peripheral.
11             See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
12
13Optional properties:
14- cts-gpios: CTS pin for UART
15
16Example:
17	uart1: serial@1f822000 {
18		compatible = "microchip,pic32mzda-uart";
19		reg = <0x1f822000 0x50>;
20		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
21			<113 IRQ_TYPE_LEVEL_HIGH>,
22			<114 IRQ_TYPE_LEVEL_HIGH>;
23		clocks = <&rootclk PB2CLK>;
24		pinctrl-names = "default";
25		pinctrl-0 = <&pinctrl_uart1
26				&pinctrl_uart1_cts
27				&pinctrl_uart1_rts>;
28		cts-gpios = <&gpio1 15 0>;
29	};
30