1TI Real Time Clock
2
3Required properties:
4- compatible:
5	- "ti,da830-rtc"  - for RTC IP used similar to that on DA8xx SoC family.
6	- "ti,am3352-rtc" - for RTC IP used similar to that on AM335x SoC family.
7			    This RTC IP has special WAKE-EN Register to enable
8			    Wakeup generation for event Alarm. It can also be
9			    used to control an external PMIC via the
10			    pmic_power_en pin.
11	- "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
12- reg: Address range of rtc register set
13- interrupts: rtc timer, alarm interrupts in order
14- interrupt-parent: phandle for the interrupt controller
15
16Optional properties:
17- system-power-controller: whether the rtc is controlling the system power
18  through pmic_power_en
19- clocks: Any internal or external clocks feeding in to rtc
20- clock-names: Corresponding names of the clocks
21- pinctrl-0: a phandle pointing to the pin settings for the device
22- pinctrl-names: should be "default"
23
24Optional subnodes:
25- generic pinctrl node
26
27Required pinctrl subnodes properties:
28- pins - Names of ext_wakeup pins to configure
29
30Optional pinctrl subnodes properties:
31- input-enable - Enables ext_wakeup
32- ti,active-high - Set input active high (by default active low)
33
34Example:
35
36rtc@1c23000 {
37	compatible = "ti,da830-rtc";
38	reg = <0x23000 0x1000>;
39	interrupts = <19
40		      19>;
41	interrupt-parent = <&intc>;
42	system-power-controller;
43	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
44	clock-names = "ext-clk", "int-clk";
45
46	pinctrl-0 = <&ext_wakeup>;
47	pinctrl-names = "default";
48
49	ext_wakeup: ext-wakeup {
50		pins = "ext_wakeup0";
51		input-enable;
52		ti,active-high;
53	};
54};
55