1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/reset/hisilicon,hi3660-reset.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Hisilicon System Reset Controller 8 9maintainers: 10 - Wei Xu <xuwei5@hisilicon.com> 11 12description: | 13 Please also refer to reset.txt in this directory for common reset 14 controller binding usage. 15 The reset controller registers are part of the system-ctl block on 16 hi3660 and hi3670 SoCs. 17 18properties: 19 compatible: 20 oneOf: 21 - items: 22 - const: hisilicon,hi3660-reset 23 - items: 24 - const: hisilicon,hi3670-reset 25 - const: hisilicon,hi3660-reset 26 27 hisilicon,rst-syscon: 28 description: phandle of the reset's syscon. 29 $ref: /schemas/types.yaml#/definitions/phandle 30 31 '#reset-cells': 32 description: | 33 Specifies the number of cells needed to encode a reset source. 34 Cell #1 : offset of the reset assert control register from the syscon 35 register base 36 offset + 4: deassert control register 37 offset + 8: status control register 38 Cell #2 : bit position of the reset in the reset control register 39 const: 2 40 41required: 42 - compatible 43 44additionalProperties: false 45 46examples: 47 - | 48 #include <dt-bindings/interrupt-controller/irq.h> 49 #include <dt-bindings/interrupt-controller/arm-gic.h> 50 #include <dt-bindings/clock/hi3660-clock.h> 51 52 iomcu: iomcu@ffd7e000 { 53 compatible = "hisilicon,hi3660-iomcu", "syscon"; 54 reg = <0xffd7e000 0x1000>; 55 }; 56 57 iomcu_rst: iomcu_rst_controller { 58 compatible = "hisilicon,hi3660-reset"; 59 hisilicon,rst-syscon = <&iomcu>; 60 #reset-cells = <2>; 61 }; 62 63 /* Specifying reset lines connected to IP modules */ 64 i2c@ffd71000 { 65 compatible = "snps,designware-i2c"; 66 reg = <0xffd71000 0x1000>; 67 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; 68 #address-cells = <1>; 69 #size-cells = <0>; 70 clock-frequency = <400000>; 71 clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>; 72 resets = <&iomcu_rst 0x20 3>; 73 pinctrl-names = "default"; 74 pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; 75 status = "disabled"; 76 }; 77... 78