1# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/remoteproc/qcom,sm6115-pas.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Qualcomm SM6115 Peripheral Authentication Service 8 9maintainers: 10 - Bhupesh Sharma <bhupesh.sharma@linaro.org> 11 12description: 13 Qualcomm SM6115 SoC Peripheral Authentication Service loads and boots 14 firmware on the Qualcomm DSP Hexagon cores. 15 16properties: 17 compatible: 18 oneOf: 19 - enum: 20 - qcom,sm6115-adsp-pas 21 - qcom,sm6115-cdsp-pas 22 - qcom,sm6115-mpss-pas 23 24 - items: 25 - const: qcom,qcm2290-adsp-pas 26 - const: qcom,sm6115-adsp-pas 27 28 - items: 29 - const: qcom,qcm2290-mpss-pas 30 - const: qcom,sm6115-mpss-pas 31 32 reg: 33 maxItems: 1 34 35 clocks: 36 items: 37 - description: XO clock 38 39 clock-names: 40 items: 41 - const: xo 42 43 memory-region: 44 maxItems: 1 45 description: Reference to the reserved-memory for the Hexagon core 46 47 smd-edge: false 48 49 firmware-name: 50 $ref: /schemas/types.yaml#/definitions/string 51 description: Firmware name for the Hexagon core 52 53required: 54 - compatible 55 - reg 56 - memory-region 57 58allOf: 59 - $ref: /schemas/remoteproc/qcom,pas-common.yaml# 60 - if: 61 properties: 62 compatible: 63 contains: 64 enum: 65 - qcom,sm6115-adsp-pas 66 - qcom,sm6115-cdsp-pas 67 then: 68 properties: 69 interrupts: 70 maxItems: 5 71 interrupt-names: 72 maxItems: 5 73 else: 74 properties: 75 interrupts: 76 minItems: 6 77 interrupt-names: 78 minItems: 6 79 80 - if: 81 properties: 82 compatible: 83 contains: 84 enum: 85 - qcom,sm6115-cdsp-pas 86 - qcom,sm6115-mpss-pas 87 then: 88 properties: 89 power-domains: 90 items: 91 - description: CX power domain 92 power-domain-names: 93 items: 94 - const: cx 95 96 - if: 97 properties: 98 compatible: 99 contains: 100 enum: 101 - qcom,sm6115-adsp-pas 102 then: 103 properties: 104 power-domains: 105 items: 106 - description: LPI CX power domain 107 - description: LPI MX power domain 108 power-domain-names: 109 items: 110 - const: lcx 111 - const: lmx 112 113unevaluatedProperties: false 114 115examples: 116 - | 117 #include <dt-bindings/clock/qcom,rpmcc.h> 118 #include <dt-bindings/interrupt-controller/arm-gic.h> 119 #include <dt-bindings/interrupt-controller/irq.h> 120 #include <dt-bindings/power/qcom-rpmpd.h> 121 122 remoteproc@ab00000 { 123 compatible = "qcom,sm6115-adsp-pas"; 124 reg = <0x0ab00000 0x100>; 125 126 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; 127 clock-names = "xo"; 128 129 firmware-name = "qcom/sm6115/adsp.mdt"; 130 131 interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, 132 <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 133 <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 134 <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 135 <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 136 interrupt-names = "wdog", "fatal", "ready", 137 "handover", "stop-ack"; 138 139 memory-region = <&pil_adsp_mem>; 140 141 power-domains = <&rpmpd SM6115_VDD_LPI_CX>, 142 <&rpmpd SM6115_VDD_LPI_MX>; 143 144 qcom,smem-states = <&adsp_smp2p_out 0>; 145 qcom,smem-state-names = "stop"; 146 147 glink-edge { 148 interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; 149 label = "lpass"; 150 qcom,remote-pid = <2>; 151 mboxes = <&apcs_glb 8>; 152 153 /* ... */ 154 155 }; 156 }; 157