1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-mss-pil.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SC7280 MSS Peripheral Image Loader
8
9maintainers:
10  - Sibi Sankar <quic_sibis@quicinc.com>
11
12description:
13  This document describes the hardware for a component that loads and boots firmware
14  on the Qualcomm Technology Inc. SC7280 Modem Hexagon Core.
15
16properties:
17  compatible:
18    enum:
19      - qcom,sc7280-mss-pil
20
21  reg:
22    items:
23      - description: MSS QDSP6 registers
24      - description: RMB registers
25
26  reg-names:
27    items:
28      - const: qdsp6
29      - const: rmb
30
31  iommus:
32    items:
33      - description: MSA Stream 1
34      - description: MSA Stream 2
35
36  interconnects:
37    items:
38      - description: Path leading to system memory
39
40  interrupts:
41    items:
42      - description: Watchdog interrupt
43      - description: Fatal interrupt
44      - description: Ready interrupt
45      - description: Handover interrupt
46      - description: Stop acknowledge interrupt
47      - description: Shutdown acknowledge interrupt
48
49  interrupt-names:
50    items:
51      - const: wdog
52      - const: fatal
53      - const: ready
54      - const: handover
55      - const: stop-ack
56      - const: shutdown-ack
57
58  clocks:
59    items:
60      - description: GCC MSS IFACE clock
61      - description: GCC MSS OFFLINE clock
62      - description: GCC MSS SNOC_AXI clock
63      - description: RPMH PKA clock
64      - description: RPMH XO clock
65
66  clock-names:
67    items:
68      - const: iface
69      - const: offline
70      - const: snoc_axi
71      - const: pka
72      - const: xo
73
74  power-domains:
75    items:
76      - description: CX power domain
77      - description: MSS power domain
78
79  power-domain-names:
80    items:
81      - const: cx
82      - const: mss
83
84  resets:
85    items:
86      - description: AOSS restart
87      - description: PDC reset
88
89  reset-names:
90    items:
91      - const: mss_restart
92      - const: pdc_reset
93
94  memory-region:
95    items:
96      - description: MBA reserved region
97      - description: modem reserved region
98
99  firmware-name:
100    $ref: /schemas/types.yaml#/definitions/string-array
101    items:
102      - description: Name of MBA firmware
103      - description: Name of modem firmware
104
105  qcom,halt-regs:
106    $ref: /schemas/types.yaml#/definitions/phandle-array
107    description:
108      Halt registers are used to halt transactions of various sub-components
109      within MSS.
110    items:
111      - items:
112          - description: phandle to TCSR_MUTEX registers
113          - description: offset to the Q6 halt register
114          - description: offset to the modem halt register
115          - description: offset to the nc halt register
116          - description: offset to the vq6 halt register
117
118  qcom,ext-regs:
119    $ref: /schemas/types.yaml#/definitions/phandle-array
120    description: EXT registers are used for various power related functionality
121    items:
122      - items:
123          - description: phandle to TCSR_REG registers
124          - description: offset to the force_clk_en register
125          - description: offset to the rscc_disable register
126      - items:
127          - description: phandle to TCSR_MUTEX registers
128          - description: offset to the axim1_clk_off register
129          - description: offset to the crypto_clk_off register
130
131  qcom,qaccept-regs:
132    $ref: /schemas/types.yaml#/definitions/phandle-array
133    description: QACCEPT registers are used to bring up/down Q-channels
134    items:
135      - items:
136          - description: phandle to TCSR_MUTEX registers
137          - description: offset to the mdm qaccept register
138          - description: offset to the cx qaccept register
139          - description: offset to the axi qaccept register
140
141  qcom,qmp:
142    $ref: /schemas/types.yaml#/definitions/phandle
143    description: Reference to the AOSS side-channel message RAM.
144
145  qcom,smem-states:
146    $ref: /schemas/types.yaml#/definitions/phandle-array
147    description: States used by the AP to signal the Hexagon core
148    items:
149      - description: Stop the modem
150
151  qcom,smem-state-names:
152    description: The names of the state bits used for SMP2P output
153    const: stop
154
155  glink-edge:
156    $ref: qcom,glink-edge.yaml#
157    unevaluatedProperties: false
158    description:
159      Qualcomm G-Link subnode which represents communication edge, channels
160      and devices related to the DSP.
161
162    properties:
163      interrupts:
164        items:
165          - description: IRQ from MSS to GLINK
166
167      mboxes:
168        items:
169          - description: Mailbox for communication between APPS and MSS
170
171      label:
172        const: modem
173
174      apr: false
175      fastrpc: false
176
177required:
178  - compatible
179  - reg
180  - reg-names
181  - iommus
182  - interconnects
183  - interrupts
184  - interrupt-names
185  - clocks
186  - clock-names
187  - power-domains
188  - power-domain-names
189  - resets
190  - reset-names
191  - qcom,halt-regs
192  - qcom,ext-regs
193  - qcom,qaccept-regs
194  - memory-region
195  - qcom,qmp
196  - qcom,smem-states
197  - qcom,smem-state-names
198  - glink-edge
199
200additionalProperties: false
201
202examples:
203  - |
204    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
205    #include <dt-bindings/clock/qcom,rpmh.h>
206    #include <dt-bindings/interconnect/qcom,sc7280.h>
207    #include <dt-bindings/interrupt-controller/arm-gic.h>
208    #include <dt-bindings/mailbox/qcom-ipcc.h>
209    #include <dt-bindings/power/qcom-rpmpd.h>
210    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
211    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
212
213    remoteproc_mpss: remoteproc@4080000 {
214        compatible = "qcom,sc7280-mss-pil";
215        reg = <0x04080000 0x10000>, <0x04180000 0x48>;
216        reg-names = "qdsp6", "rmb";
217
218        iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
219
220        interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
221
222        interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
223                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
224                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
225                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
226                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
227                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
228
229        interrupt-names = "wdog", "fatal", "ready", "handover",
230                          "stop-ack", "shutdown-ack";
231
232        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
233                 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
234                 <&gcc GCC_MSS_SNOC_AXI_CLK>,
235                 <&rpmhcc RPMH_PKA_CLK>,
236                 <&rpmhcc RPMH_CXO_CLK>;
237        clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
238
239        power-domains = <&rpmhpd SC7280_CX>,
240                        <&rpmhpd SC7280_MSS>;
241        power-domain-names = "cx", "mss";
242
243        memory-region = <&mba_mem>, <&mpss_mem>;
244
245        qcom,qmp = <&aoss_qmp>;
246
247        qcom,smem-states = <&modem_smp2p_out 0>;
248        qcom,smem-state-names = "stop";
249
250        resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
251                 <&pdc_reset PDC_MODEM_SYNC_RESET>;
252        reset-names = "mss_restart", "pdc_reset";
253
254        qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
255        qcom,ext-regs = <&tcsr 0x10000 0x10004>, <&tcsr_mutex 0x26004 0x26008>;
256        qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>;
257
258        glink-edge {
259            interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
260                                   IPCC_MPROC_SIGNAL_GLINK_QMP
261                                   IRQ_TYPE_EDGE_RISING>;
262            mboxes = <&ipcc IPCC_CLIENT_MPSS
263                      IPCC_MPROC_SIGNAL_GLINK_QMP>;
264            label = "modem";
265            qcom,remote-pid = <1>;
266        };
267    };
268