1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/regulator/richtek,rt4801-regulator.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Richtek RT4801 Display Bias regulators 8 9maintainers: 10 - ChiYuan Huang <cy_huang@richtek.com> 11 12description: | 13 Regulator nodes should be named to DSVP and DSVN. The 14 definition for each of these nodes is defined using the standard 15 binding for regulators at 16 Documentation/devicetree/bindings/regulator/regulator.txt. 17 Datasheet is available at 18 https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf 19 20#The valid names for RT4801 regulator nodes are: 21#DSVP, DSVN 22 23properties: 24 compatible: 25 enum: 26 - richtek,rt4801 27 28 reg: 29 maxItems: 1 30 31 enable-gpios: 32 description: GPIOs to use to enable DSVP/DSVN regulator. 33 The first one is ENP to enable DSVP, and second one is ENM to enable DSVN. 34 Number of GPIO in the array list could be 1 or 2. 35 If only one gpio is specified, only one gpio used to control ENP/ENM. 36 Else both are spefied, DSVP/DSVN could be controlled individually. 37 Othersie, this property not specified. treat both as always-on regulator. 38 minItems: 1 39 maxItems: 2 40 41patternProperties: 42 "^DSV(P|N)$": 43 type: object 44 $ref: regulator.yaml# 45 description: 46 Properties for single display bias regulator. 47 48required: 49 - compatible 50 - reg 51 52additionalProperties: false 53 54examples: 55 - | 56 i2c { 57 #address-cells = <1>; 58 #size-cells = <0>; 59 60 rt4801@73 { 61 compatible = "richtek,rt4801"; 62 reg = <0x73>; 63 enable-gpios = <&gpio26 2 0>, <&gpio26 3 0>; 64 65 dsvp: DSVP { 66 regulator-name = "rt4801,dsvp"; 67 regulator-min-microvolt = <4000000>; 68 regulator-max-microvolt = <6000000>; 69 regulator-boot-on; 70 }; 71 dsvn: DSVN { 72 regulator-name = "rt4801,dsvn"; 73 regulator-min-microvolt = <4000000>; 74 regulator-max-microvolt = <6000000>; 75 regulator-boot-on; 76 }; 77 78 }; 79 }; 80