1* Powerventure Semiconductor PV88080 Voltage Regulator
2
3Required properties:
4- compatible: "pvs,pv88080".
5- reg: I2C slave address, usually 0x49.
6- interrupts: the interrupt outputs of the controller
7- regulators: A node that houses a sub-node for each regulator within the
8  device. Each sub-node is identified using the node's name, with valid
9  values listed below. The content of each sub-node is defined by the
10  standard binding for regulators; see regulator.txt.
11  BUCK1, BUCK2, and BUCK3.
12
13Optional properties:
14- Any optional property defined in regulator.txt
15
16Example
17
18	pmic: pv88080@49 {
19		compatible = "pvs,pv88080";
20		reg = <0x49>;
21		interrupt-parent = <&gpio>;
22		interrupts = <24 24>;
23
24		regulators {
25			BUCK1 {
26				regulator-name = "buck1";
27				regulator-min-microvolt = < 600000>;
28				regulator-max-microvolt = <1393750>;
29				regulator-min-microamp 	= < 220000>;
30				regulator-max-microamp 	= <7040000>;
31			};
32
33			BUCK2 {
34				regulator-name = "buck2";
35				regulator-min-microvolt = < 600000>;
36				regulator-max-microvolt = <1393750>;
37				regulator-min-microamp 	= <1496000>;
38				regulator-max-microamp 	= <4189000>;
39			};
40
41			BUCK3 {
42				regulator-name = "buck3";
43				regulator-min-microvolt = <1400000>;
44				regulator-max-microvolt = <2193750>;
45				regulator-min-microamp 	= <1496000>;
46				regulator-max-microamp 	= <4189000>;
47			};
48		};
49	};
50