1Binding for TI/National Semiconductor LP872x Driver
2
3Required properties:
4  - compatible: "ti,lp8720" or "ti,lp8725"
5  - reg: I2C slave address. 0x7d = LP8720, 0x7a = LP8725
6
7Optional properties:
8  - ti,general-config: the value of LP872X_GENERAL_CFG register (u8)
9    (LP8720)
10    bit[2]: BUCK output voltage control by external DVS pin or register
11            1 = external pin, 0 = bit7 of register 08h
12    bit[1]: sleep control by external DVS pin or register
13            1 = external pin, 0 = bit6 of register 08h
14    bit[0]: time step unit(usec). 1 = 25, 0 = 50
15
16    (LP8725)
17    bit[7:6]: time step unit(usec). 00 = 32, 01 = 64, 10 = 128, 11 = 256
18    bit[4]:   BUCK2 enable control. 1 = enable, 0 = disable
19    bit[3]:   BUCK2 output voltage register address. 1 = 0Ah, 0 = 0Bh
20    bit[2]:   BUCK1 output voltage control by external DVS pin or register
21              1 = register 08h, 0 = DVS
22    bit[1]:   LDO sleep control. 1 = sleep mode, 0 = normal
23    bit[0]:   BUCK1 enable control, 1 = enable, 0 = disable
24
25    For more details, please see the datasheet.
26
27  - ti,update-config: define it when LP872X_GENERAL_CFG register should be set
28  - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
29  - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
30  - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
31  - enable-gpios: GPIO specifier for EN pin control of LP872x devices.
32
33  Sub nodes for regulator_init_data
34    LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck)
35    LP8725 has maximum 9 nodes. (child name: ldo1 ~ 5, lilo1,2 and buck1,2)
36    For more details, please see the following binding document.
37    (Documentation/devicetree/bindings/regulator/regulator.txt)
38
39Datasheet
40  - LP8720: http://www.ti.com/lit/ds/symlink/lp8720.pdf
41  - LP8725: http://www.ti.com/lit/ds/symlink/lp8725.pdf
42
43Example 1) LP8720
44
45lp8720@7d {
46	compatible = "ti,lp8720";
47	reg = <0x7d>;
48
49	/* external DVS pin used, timestep is 25usec */
50	ti,general-config = /bits/ 8 <0x03>;
51	ti,update-config;
52
53	/*
54	 * The dvs-gpio depends on the processor environment.
55	 * For example, following GPIO specifier means GPIO134 in OMAP4.
56	 */
57	ti,dvs-gpio = <&gpio5 6 0>;
58	ti,dvs-vsel = /bits/ 8 <1>;		/* SEL_V2 */
59	ti,dvs-state = /bits/ 8 <1>;		/* DVS_HIGH */
60
61	vaf: ldo1 {
62		regulator-min-microvolt = <1200000>;
63		regulator-max-microvolt = <3300000>;
64	};
65
66	vmmc: ldo2 {
67		regulator-min-microvolt = <1200000>;
68		regulator-max-microvolt = <3300000>;
69	};
70
71	vcam_io: ldo3 {
72		regulator-min-microvolt = <1200000>;
73		regulator-max-microvolt = <3300000>;
74		regulator-boot-on;
75	};
76
77	vcam_core: ldo4 {
78		regulator-min-microvolt = <800000>;
79		regulator-max-microvolt = <2850000>;
80		regulator-boot-on;
81	};
82
83	vcam: ldo5 {
84		regulator-min-microvolt = <1200000>;
85		regulator-max-microvolt = <3300000>;
86	};
87
88	vcc: buck {
89		regulator-name = "VBUCK";
90		regulator-min-microvolt = <800000>;
91		regulator-max-microvolt = <2300000>;
92	};
93};
94
95Example 2) LP8725
96
97lp8725@7a {
98	compatible = "ti,lp8725";
99	reg = <0x7a>;
100
101	/* Enable BUCK1,2, no DVS, normal LDO mode, timestep is 256usec */
102	ti,general-config = /bits/ 8 <0xdd>;
103	ti,update-config;
104
105	vcam_io: ldo1 {
106		regulator-min-microvolt = <1200000>;
107		regulator-max-microvolt = <3300000>;
108	};
109
110	vcam_core: ldo2 {
111		regulator-min-microvolt = <1200000>;
112		regulator-max-microvolt = <3300000>;
113	};
114
115	vcam: ldo3 {
116		regulator-min-microvolt = <1200000>;
117		regulator-max-microvolt = <3300000>;
118	};
119
120	vcmmb_io: ldo4 {
121		regulator-min-microvolt = <1200000>;
122		regulator-max-microvolt = <3300000>;
123		regulator-boot-on;
124	};
125
126	vcmmb_core: ldo5 {
127		regulator-min-microvolt = <1200000>;
128		regulator-max-microvolt = <3300000>;
129		regulator-boot-on;
130	};
131
132	vaux1: lilo1 {
133		regulator-name = "VAUX1";
134		regulator-min-microvolt = <800000>;
135		regulator-max-microvolt = <3300000>;
136	};
137
138	vaux2: lilo2 {
139		regulator-name = "VAUX2";
140		regulator-min-microvolt = <800000>;
141		regulator-max-microvolt = <3300000>;
142	};
143
144	vcc1: buck1 {
145		regulator-name = "VBUCK1";
146		regulator-min-microvolt = <800000>;
147		regulator-max-microvolt = <3000000>;
148		regulator-min-microamp  = <460000>;
149		regulator-max-microamp  = <1370000>;
150		regulator-boot-on;
151	};
152
153	vcc2: buck2 {
154		regulator-name = "VBUCK2";
155		regulator-min-microvolt = <800000>;
156		regulator-max-microvolt = <3000000>;
157		regulator-min-microamp  = <460000>;
158		regulator-max-microamp  = <1370000>;
159		regulator-boot-on;
160	};
161};
162