1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/regulator/gpio-regulator.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: GPIO controlled regulators
8
9maintainers:
10  - Liam Girdwood <lgirdwood@gmail.com>
11  - Mark Brown <broonie@kernel.org>
12
13description:
14  Any property defined as part of the core regulator binding, defined in
15  regulator.txt, can also be used.
16
17allOf:
18  - $ref: "regulator.yaml#"
19
20properties:
21  compatible:
22    const: regulator-gpio
23
24  regulator-name: true
25
26  enable-gpios:
27    description: GPIO to use to enable/disable the regulator.
28      Warning, the GPIO phandle flags are ignored and the GPIO polarity is
29      controlled solely by the presence of "enable-active-high" DT property.
30      This is due to compatibility with old DTs.
31    maxItems: 1
32
33  gpios:
34    description: Array of one or more GPIO pins used to select the regulator
35      voltage/current listed in "states".
36    minItems: 1
37    maxItems: 8  # Should be enough...
38
39  gpios-states:
40    description: |
41      On operating systems, that don't support reading back gpio values in
42      output mode (most notably linux), this array provides the state of GPIO
43      pins set when requesting them from the gpio controller. Systems, that are
44      capable of preserving state when requesting the lines, are free to ignore
45      this property.
46        0: LOW
47        1: HIGH
48      Default is LOW if nothing else is specified.
49    allOf:
50      - $ref: /schemas/types.yaml#/definitions/uint32-array
51      - maxItems: 8
52        items:
53          enum: [ 0, 1 ]
54          default: 0
55
56  states:
57    description: Selection of available voltages/currents provided by this
58      regulator and matching GPIO configurations to achieve them. If there are
59      no states in the "states" array, use a fixed regulator instead.
60    allOf:
61      - $ref: /schemas/types.yaml#/definitions/uint32-matrix
62      - maxItems: 8
63        items:
64          items:
65            - description: Voltage in microvolts
66            - description: GPIO group state value
67
68  startup-delay-us:
69    description: startup time in microseconds
70
71  enable-active-high:
72    description: Polarity of "enable-gpio" GPIO is active HIGH. Default is
73      active LOW.
74    type: boolean
75
76  gpio-open-drain:
77    description:
78      GPIO is open drain type. If this property is missing then default
79      assumption is false.
80    type: boolean
81
82  regulator-type:
83    description: Specifies what is being regulated.
84    allOf:
85      - $ref: /schemas/types.yaml#/definitions/string
86      - enum:
87          - voltage
88          - current
89        default: voltage
90
91required:
92  - compatible
93  - regulator-name
94  - gpios
95  - states
96
97examples:
98  - |
99    gpio-regulator {
100      compatible = "regulator-gpio";
101
102      regulator-name = "mmci-gpio-supply";
103      regulator-min-microvolt = <1800000>;
104      regulator-max-microvolt = <2600000>;
105      regulator-boot-on;
106
107      enable-gpios = <&gpio0 23 0x4>;
108      gpios = <&gpio0 24 0x4
109        &gpio0 25 0x4>;
110      states = <1800000 0x3>,
111        <2200000 0x2>,
112        <2600000 0x1>,
113        <2900000 0x0>;
114
115      startup-delay-us = <100000>;
116      enable-active-high;
117    };
118...
119