12596e07aSArnd BergmannDevicetree binding for regmap 2275876e2SXiubo Li 3a06c488dSMark BrownOptional properties: 42596e07aSArnd Bergmann 52596e07aSArnd Bergmann little-endian, 62596e07aSArnd Bergmann big-endian, 72596e07aSArnd Bergmann native-endian: See common-properties.txt for a definition 82596e07aSArnd Bergmann 92596e07aSArnd BergmannNote: 102596e07aSArnd BergmannRegmap defaults to little-endian register access on MMIO based 112596e07aSArnd Bergmanndevices, this is by far the most common setting. On CPU 122596e07aSArnd Bergmannarchitectures that typically run big-endian operating systems 132596e07aSArnd Bergmann(e.g. PowerPC), registers can be defined as big-endian and must 142596e07aSArnd Bergmannbe marked that way in the devicetree. 152596e07aSArnd Bergmann 162596e07aSArnd BergmannOn SoCs that can be operated in both big-endian and little-endian 177587eb18SOtto Kekäläinenmodes, with a single hardware switch controlling both the endianness 182596e07aSArnd Bergmannof the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS 192596e07aSArnd Bergmannchips), "native-endian" is used to allow using the same device tree 202596e07aSArnd Bergmannblob in both cases. 21275876e2SXiubo Li 22275876e2SXiubo LiExamples: 232596e07aSArnd BergmannScenario 1 : a register set in big-endian mode. 24275876e2SXiubo Lidev: dev@40031000 { 252596e07aSArnd Bergmann compatible = "syscon"; 26275876e2SXiubo Li reg = <0x40031000 0x1000>; 27275876e2SXiubo Li big-endian; 28275876e2SXiubo Li ... 29275876e2SXiubo Li}; 30