1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/power/qcom,rpmpd.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm RPM/RPMh Power domains
8
9maintainers:
10  - Rajendra Nayak <rnayak@codeaurora.org>
11
12description:
13  For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
14  which then translates it into a corresponding voltage on a rail.
15
16properties:
17  compatible:
18    enum:
19      - qcom,mdm9607-rpmpd
20      - qcom,msm8916-rpmpd
21      - qcom,msm8939-rpmpd
22      - qcom,msm8976-rpmpd
23      - qcom,msm8994-rpmpd
24      - qcom,msm8996-rpmpd
25      - qcom,msm8998-rpmpd
26      - qcom,qcs404-rpmpd
27      - qcom,sdm660-rpmpd
28      - qcom,sc7180-rpmhpd
29      - qcom,sc7280-rpmhpd
30      - qcom,sc8180x-rpmhpd
31      - qcom,sdm845-rpmhpd
32      - qcom,sdx55-rpmhpd
33      - qcom,sm8150-rpmhpd
34      - qcom,sm8250-rpmhpd
35      - qcom,sm8350-rpmhpd
36
37  '#power-domain-cells':
38    const: 1
39
40  operating-points-v2: true
41
42  opp-table:
43    type: object
44
45required:
46  - compatible
47  - '#power-domain-cells'
48  - operating-points-v2
49
50additionalProperties: false
51
52examples:
53  - |
54
55    // Example 1 (rpmh power domain controller and OPP table):
56
57    #include <dt-bindings/power/qcom-rpmpd.h>
58
59    rpmhpd: power-controller {
60      compatible = "qcom,sdm845-rpmhpd";
61      #power-domain-cells = <1>;
62      operating-points-v2 = <&rpmhpd_opp_table>;
63
64      rpmhpd_opp_table: opp-table {
65        compatible = "operating-points-v2";
66
67        rpmhpd_opp_ret: opp1 {
68          opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
69        };
70
71        rpmhpd_opp_min_svs: opp2 {
72          opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
73        };
74
75        rpmhpd_opp_low_svs: opp3 {
76          opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
77        };
78
79        rpmhpd_opp_svs: opp4 {
80          opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
81        };
82
83        rpmhpd_opp_svs_l1: opp5 {
84          opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
85        };
86
87        rpmhpd_opp_nom: opp6 {
88          opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
89        };
90
91        rpmhpd_opp_nom_l1: opp7 {
92          opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
93        };
94
95        rpmhpd_opp_nom_l2: opp8 {
96          opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
97        };
98
99        rpmhpd_opp_turbo: opp9 {
100          opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
101        };
102
103        rpmhpd_opp_turbo_l1: opp10 {
104          opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
105        };
106      };
107    };
108
109  - |
110
111    // Example 2 (rpm power domain controller and OPP table):
112
113    rpmpd: power-controller {
114      compatible = "qcom,msm8996-rpmpd";
115      #power-domain-cells = <1>;
116      operating-points-v2 = <&rpmpd_opp_table>;
117
118      rpmpd_opp_table: opp-table {
119        compatible = "operating-points-v2";
120
121        rpmpd_opp_low: opp1 {
122          opp-level = <1>;
123        };
124
125        rpmpd_opp_ret: opp2 {
126          opp-level = <2>;
127        };
128
129        rpmpd_opp_svs: opp3 {
130          opp-level = <3>;
131        };
132
133        rpmpd_opp_normal: opp4 {
134          opp-level = <4>;
135        };
136
137        rpmpd_opp_high: opp5 {
138          opp-level = <5>;
139        };
140
141        rpmpd_opp_turbo: opp6 {
142          opp-level = <6>;
143        };
144      };
145    };
146
147  - |
148
149    // Example 3 (Client/Consumer device using OPP table):
150
151    leaky-device0@12350000 {
152      compatible = "foo,i-leak-current";
153      reg = <0x12350000 0x1000>;
154      power-domains = <&rpmhpd 0>;
155      operating-points-v2 = <&leaky_opp_table>;
156    };
157
158    leaky_opp_table: opp-table {
159      compatible = "operating-points-v2";
160      opp1 {
161        opp-hz = /bits/ 64 <144000>;
162        required-opps = <&rpmhpd_opp_low>;
163      };
164
165      opp2 {
166        opp-hz = /bits/ 64 <400000>;
167        required-opps = <&rpmhpd_opp_ret>;
168      };
169
170      opp3 {
171        opp-hz = /bits/ 64 <20000000>;
172        required-opps = <&rpmpd_opp_svs>;
173      };
174
175      opp4 {
176        opp-hz = /bits/ 64 <25000000>;
177        required-opps = <&rpmpd_opp_normal>;
178      };
179    };
180...
181