1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Core Power Reduction (CPR) bindings
8
9maintainers:
10  - Niklas Cassel <nks@flawful.org>
11
12description: |
13  CPR (Core Power Reduction) is a technology to reduce core power on a CPU
14  or other device. Each OPP of a device corresponds to a "corner" that has
15  a range of valid voltages for a particular frequency. While the device is
16  running at a particular frequency, CPR monitors dynamic factors such as
17  temperature, etc. and suggests adjustments to the voltage to save power
18  and meet silicon characteristic requirements.
19
20properties:
21  compatible:
22    items:
23      - enum:
24          - qcom,qcs404-cpr
25      - const: qcom,cpr
26
27  reg:
28    description: Base address and size of the RBCPR register region.
29    maxItems: 1
30
31  interrupts:
32    maxItems: 1
33
34  clocks:
35    items:
36      - description: Reference clock.
37
38  clock-names:
39    items:
40      - const: ref
41
42  vdd-apc-supply:
43    description: APC regulator supply.
44
45  '#power-domain-cells':
46    const: 0
47
48  operating-points-v2:
49    description: |
50      A phandle to the OPP table containing the performance states
51      supported by the CPR power domain.
52
53  acc-syscon:
54    $ref: /schemas/types.yaml#/definitions/phandle
55    description: A phandle to the syscon used for writing ACC settings.
56
57  nvmem-cells:
58    items:
59      - description: Corner 1 quotient offset
60      - description: Corner 2 quotient offset
61      - description: Corner 3 quotient offset
62      - description: Corner 1 initial voltage
63      - description: Corner 2 initial voltage
64      - description: Corner 3 initial voltage
65      - description: Corner 1 quotient
66      - description: Corner 2 quotient
67      - description: Corner 3 quotient
68      - description: Corner 1 ring oscillator
69      - description: Corner 2 ring oscillator
70      - description: Corner 3 ring oscillator
71      - description: Fuse revision
72
73  nvmem-cell-names:
74    items:
75      - const: cpr_quotient_offset1
76      - const: cpr_quotient_offset2
77      - const: cpr_quotient_offset3
78      - const: cpr_init_voltage1
79      - const: cpr_init_voltage2
80      - const: cpr_init_voltage3
81      - const: cpr_quotient1
82      - const: cpr_quotient2
83      - const: cpr_quotient3
84      - const: cpr_ring_osc1
85      - const: cpr_ring_osc2
86      - const: cpr_ring_osc3
87      - const: cpr_fuse_revision
88
89required:
90  - compatible
91  - reg
92  - interrupts
93  - clocks
94  - clock-names
95  - vdd-apc-supply
96  - '#power-domain-cells'
97  - operating-points-v2
98  - nvmem-cells
99  - nvmem-cell-names
100
101additionalProperties: false
102
103examples:
104  - |
105    #include <dt-bindings/interrupt-controller/arm-gic.h>
106
107    cpr_opp_table: opp-table-cpr {
108        compatible = "operating-points-v2-qcom-level";
109
110        cpr_opp1: opp1 {
111            opp-level = <1>;
112            qcom,opp-fuse-level = <1>;
113        };
114        cpr_opp2: opp2 {
115            opp-level = <2>;
116            qcom,opp-fuse-level = <2>;
117        };
118        cpr_opp3: opp3 {
119            opp-level = <3>;
120            qcom,opp-fuse-level = <3>;
121        };
122    };
123
124    power-controller@b018000 {
125        compatible = "qcom,qcs404-cpr", "qcom,cpr";
126        reg = <0x0b018000 0x1000>;
127        interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
128        clocks = <&xo_board>;
129        clock-names = "ref";
130        vdd-apc-supply = <&pms405_s3>;
131        #power-domain-cells = <0>;
132        operating-points-v2 = <&cpr_opp_table>;
133        acc-syscon = <&tcsr>;
134
135        nvmem-cells = <&cpr_efuse_quot_offset1>,
136            <&cpr_efuse_quot_offset2>,
137            <&cpr_efuse_quot_offset3>,
138            <&cpr_efuse_init_voltage1>,
139            <&cpr_efuse_init_voltage2>,
140            <&cpr_efuse_init_voltage3>,
141            <&cpr_efuse_quot1>,
142            <&cpr_efuse_quot2>,
143            <&cpr_efuse_quot3>,
144            <&cpr_efuse_ring1>,
145            <&cpr_efuse_ring2>,
146            <&cpr_efuse_ring3>,
147            <&cpr_efuse_revision>;
148        nvmem-cell-names = "cpr_quotient_offset1",
149            "cpr_quotient_offset2",
150            "cpr_quotient_offset3",
151            "cpr_init_voltage1",
152            "cpr_init_voltage2",
153            "cpr_init_voltage3",
154            "cpr_quotient1",
155            "cpr_quotient2",
156            "cpr_quotient3",
157            "cpr_ring_osc1",
158            "cpr_ring_osc2",
159            "cpr_ring_osc3",
160            "cpr_fuse_revision";
161    };
162