1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2# Copyright (C) Sunplus Co., Ltd.
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/pinctrl/sunplus,sp7021-pinctrl.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: Sunplus SP7021 Pin Controller Device Tree Bindings
9
10maintainers:
11  - Dvorkin Dmitry <dvorkin@tibbo.com>
12  - Wells Lu <wellslutw@gmail.com>
13
14description: |
15  The Sunplus SP7021 pin controller is used to control SoC pins. Please
16  refer to pinctrl-bindings.txt in this directory for details of the common
17  pinctrl bindings used by client devices.
18
19  SP7021 has 99 digital GPIO pins which are numbered from GPIO 0 to 98. All
20  are multiplexed with some special function pins. SP7021 has 3 types of
21  special function pins:
22
23  (1) function-group pins:
24      Ex 1 (SPI-NOR flash):
25        If control-field SPI_FLASH_SEL is set to 1, GPIO 83, 84, 86 and 87
26        will be pins of SPI-NOR flash. If it is set to 2, GPIO 76, 78, 79
27        and 81 will be pins of SPI-NOR flash.
28
29      Ex 2 (UART_0):
30        If control-bit UA0_SEL is set to 1, GPIO 88 and 89 will be TX and
31        RX pins of UART_0 (UART channel 0).
32
33      Ex 3 (eMMC):
34        If control-bit EMMC_SEL is set to 1, GPIO 72, 73, 74, 75, 76, 77,
35        78, 79, 80, 81 will be pins of an eMMC device.
36
37      Properties "function" and "groups" are used to select function-group
38      pins.
39
40  (2) fully pin-mux (like phone exchange mux) pins:
41      GPIO 8 to 71 are 'fully pin-mux' pins. Any pins of peripherals of
42      SP7021 (ex: UART_1, UART_2, UART_3, UART_4, I2C_0, I2C_1, and etc.)
43      can be routed to any pins of fully pin-mux pins.
44
45      Ex 1 (UART channel 1):
46        If control-field UA1_TX_SEL is set to 3, TX pin of UART_1 will be
47        routed to GPIO 10 (3 - 1 + 8 = 10).
48        If control-field UA1_RX_SEL is set to 4, RX pin of UART_1 will be
49        routed to GPIO 11 (4 - 1 + 8 = 11).
50        If control-field UA1_RTS_SEL is set to 5, RTS pin of UART_1 will
51        be routed to GPIO 12 (5 - 1 + 8 = 12).
52        If control-field UA1_CTS_SEL is set to 6, CTS pin of UART_1 will
53        be routed to GPIO 13 (6 - 1 + 8 = 13).
54
55      Ex 2 (I2C channel 0):
56        If control-field I2C0_CLK_SEL is set to 20, CLK pin of I2C_0 will
57        be routed to GPIO 27 (20 - 1 + 8 = 27).
58        If control-field I2C0_DATA_SEL is set to 21, DATA pin of I2C_0
59        will be routed to GPIO 28 (21 - 1 + 9 = 28).
60
61      Totally, SP7021 has 120 peripheral pins. The peripheral pins can be
62      routed to any of 64 'fully pin-mux' pins.
63
64  (3) I/O processor pins
65      SP7021 has a built-in I/O processor.
66      Any GPIO pins (GPIO 0 to 98) can be set to pins of I/O processor.
67
68  Vendor property "sunplus,pins" is used to select "fully pin-mux" pins,
69  "I/O processor pins" and "digital GPIO" pins.
70
71  The device node of pin controller of Sunplus SP7021 has following
72  properties.
73
74properties:
75  compatible:
76    const: sunplus,sp7021-pctl
77
78  gpio-controller: true
79
80  '#gpio-cells':
81    const: 2
82
83  reg:
84    items:
85      - description: the MOON2 registers
86      - description: the GPIOXT registers
87      - description: the FIRST registers
88      - description: the MOON1 registers
89
90  reg-names:
91    items:
92      - const: moon2
93      - const: gpioxt
94      - const: first
95      - const: moon1
96
97  clocks:
98    maxItems: 1
99
100  resets:
101    maxItems: 1
102
103patternProperties:
104  '-pins$':
105    type: object
106    description: |
107      A pinctrl node should contain at least one subnodes representing the
108      pins or function-pins group available on the machine. Each subnode
109      will list the pins it needs, and how they should be configured.
110
111      Pinctrl node's client devices use subnodes for desired pin
112      configuration. Client device subnodes use below standard properties.
113    $ref: pinmux-node.yaml#
114
115    properties:
116      sunplus,pins:
117        description: |
118          Define 'sunplus,pins' which are used by pinctrl node's client
119          device.
120
121          It consists of one or more integers which represents the config
122          setting for corresponding pin. Each integer defines a individual
123          pin in which:
124
125          Bit 32~24: defines GPIO number. Its range is 0 ~ 98.
126          Bit 23~16: defines types: (1) fully pin-mux pins
127                                    (2) IO processor pins
128                                    (3) digital GPIO pins
129          Bit 15~8:  defines pins of peripherals (which are defined in
130                     'include/dt-binging/pinctrl/sppctl.h').
131          Bit 7~0:   defines types or initial-state of digital GPIO pins.
132
133          Please use macro SPPCTL_IOPAD to define the integers for pins.
134
135        $ref: /schemas/types.yaml#/definitions/uint32-array
136
137      function:
138        description: |
139          Define pin-function which is used by pinctrl node's client device.
140          The name should be one of string in the following enumeration.
141        $ref: "/schemas/types.yaml#/definitions/string"
142        enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD,
143                UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ]
144
145      groups:
146        description: |
147          Define pin-group in a specified pin-function.
148          The name should be one of string in the following enumeration.
149        $ref: "/schemas/types.yaml#/definitions/string"
150        enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2,
151                SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1,
152                HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ]
153
154      sunplus,zerofunc:
155        description: |
156          This is a vendor specific property. It is used to disable pins
157          which are not used by pinctrl node's client device.
158          Some pins may be enabled by boot-loader. We can use this
159          property to disable them.
160        $ref: /schemas/types.yaml#/definitions/uint32-array
161
162    additionalProperties: false
163
164    allOf:
165      - if:
166          properties:
167            function:
168              enum:
169                - SPI_FLASH
170        then:
171          properties:
172            groups:
173              enum:
174                - SPI_FLASH1
175                - SPI_FLASH2
176      - if:
177          properties:
178            function:
179              enum:
180                - SPI_FLASH_4BIT
181        then:
182          properties:
183            groups:
184              enum:
185                - SPI_FLASH_4BIT1
186                - SPI_FLASH_4BIT2
187      - if:
188          properties:
189            function:
190              enum:
191                - SPI_NAND
192        then:
193          properties:
194            groups:
195              enum:
196                - SPI_NAND
197      - if:
198          properties:
199            function:
200              enum:
201                - CARD0_EMMC
202        then:
203          properties:
204            groups:
205              enum:
206                - CARD0_EMMC
207      - if:
208          properties:
209            function:
210              enum:
211                - SD_CARD
212        then:
213          properties:
214            groups:
215              enum:
216                - SD_CARD
217      - if:
218          properties:
219            function:
220              enum:
221                - UA0
222        then:
223          properties:
224            groups:
225              enum:
226                - UA0
227      - if:
228          properties:
229            function:
230              enum:
231                - FPGA_IFX
232        then:
233          properties:
234            groups:
235              enum:
236                - FPGA_IFX
237      - if:
238          properties:
239            function:
240              enum:
241                - HDMI_TX
242        then:
243          properties:
244            groups:
245              enum:
246                - HDMI_TX1
247                - HDMI_TX2
248                - HDMI_TX3
249      - if:
250          properties:
251            function:
252              enum:
253                - LCDIF
254        then:
255          properties:
256            groups:
257              enum:
258                - LCDIF
259      - if:
260          properties:
261            function:
262              enum:
263                - USB0_OTG
264        then:
265          properties:
266            groups:
267              enum:
268                - USB0_OTG
269      - if:
270          properties:
271            function:
272              enum:
273                - USB1_OTG
274        then:
275          properties:
276            groups:
277              enum:
278                - USB1_OTG
279
280required:
281  - compatible
282  - reg
283  - reg-names
284  - "#gpio-cells"
285  - gpio-controller
286  - clocks
287  - resets
288
289additionalProperties: false
290
291allOf:
292  - $ref: "pinctrl.yaml#"
293
294examples:
295  - |
296    #include <dt-bindings/pinctrl/sppctl-sp7021.h>
297
298    pinctrl@9c000100 {
299        compatible = "sunplus,sp7021-pctl";
300        reg = <0x9c000100 0x100>, <0x9c000300 0x100>,
301              <0x9c0032e4 0x1c>, <0x9c000080 0x20>;
302        reg-names = "moon2", "gpioxt", "first", "moon1";
303        gpio-controller;
304        #gpio-cells = <2>;
305        clocks = <&clkc 0x83>;
306        resets = <&rstc 0x73>;
307
308        uart0-pins {
309            function = "UA0";
310            groups = "UA0";
311        };
312
313        spinand0-pins {
314            function = "SPI_NAND";
315            groups = "SPI_NAND";
316        };
317
318        uart1-pins {
319            sunplus,pins = <
320                SPPCTL_IOPAD(11, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
321                SPPCTL_IOPAD(10, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
322            >;
323        };
324
325        uart2-pins {
326            sunplus,pins = <
327                SPPCTL_IOPAD(20, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
328                SPPCTL_IOPAD(21, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
329                SPPCTL_IOPAD(22, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RTS, 0)
330                SPPCTL_IOPAD(23, SPPCTL_PCTL_G_PMUX, MUXF_UA1_CTS, 0)
331            >;
332        };
333
334        emmc-pins {
335            function = "CARD0_EMMC";
336            groups = "CARD0_EMMC";
337        };
338
339        sdcard-pins {
340            function = "SD_CARD";
341            groups = "SD_CARD";
342            sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
343        };
344
345        hdmi_A_tx1-pins {
346            function = "HDMI_TX";
347            groups = "HDMI_TX1";
348        };
349        hdmi_A_tx2-pins {
350            function = "HDMI_TX";
351            groups = "HDMI_TX2";
352        };
353        hdmi_A_tx3-pins {
354            function = "HDMI_TX";
355            groups = "HDMI_TX3";
356        };
357
358        ethernet-pins {
359            sunplus,pins = <
360                SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
361                SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
362                SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
363                SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
364                SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
365                SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
366                SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
367                SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
368                SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
369            >;
370            sunplus,zerofunc = <
371                MUXF_L2SW_LED_FLASH0
372                MUXF_L2SW_LED_ON0
373                MUXF_L2SW_P0_MAC_RMII_RXER
374            >;
375        };
376    };
377...
378