1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Renesas RZ/{G2L,V2L} combined Pin and GPIO controller
8
9maintainers:
10  - Geert Uytterhoeven <geert+renesas@glider.be>
11  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
12
13description:
14  The Renesas SoCs of the RZ/{G2L,V2L} alike series feature a combined Pin and
15  GPIO controller.
16  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
17  Each port features up to 8 pins, each of them configurable for GPIO function
18  (port mode) or in alternate function mode.
19  Up to 8 different alternate function modes exist for each single pin.
20
21properties:
22  compatible:
23    oneOf:
24      - items:
25          - enum:
26              - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five
27              - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
28
29      - items:
30          - enum:
31              - renesas,r9a07g054-pinctrl     # RZ/V2L
32          - const: renesas,r9a07g044-pinctrl  # RZ/G2{L,LC} fallback for RZ/V2L
33
34  reg:
35    maxItems: 1
36
37  gpio-controller: true
38
39  '#gpio-cells':
40    const: 2
41    description:
42      The first cell contains the global GPIO port index, constructed using the
43      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
44      second cell represents consumer flag as mentioned in ../gpio/gpio.txt
45      E.g. "RZG2L_GPIO(39, 1)" for P39_1.
46
47  gpio-ranges:
48    maxItems: 1
49
50  interrupt-controller: true
51
52  '#interrupt-cells':
53    const: 2
54    description:
55      The first cell contains the global GPIO port index, constructed using the
56      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
57      second cell is used to specify the flag.
58      E.g. "interrupts = <RZG2L_GPIO(43, 0) IRQ_TYPE_EDGE_FALLING>;" if P43_0 is
59      being used as an interrupt.
60
61  clocks:
62    maxItems: 1
63
64  power-domains:
65    maxItems: 1
66
67  resets:
68    items:
69      - description: GPIO_RSTN signal
70      - description: GPIO_PORT_RESETN signal
71      - description: GPIO_SPARE_RESETN signal
72
73additionalProperties:
74  anyOf:
75    - type: object
76      allOf:
77        - $ref: pincfg-node.yaml#
78        - $ref: pinmux-node.yaml#
79
80      description:
81        Pin controller client devices use pin configuration subnodes (children
82        and grandchildren) for desired pin configuration.
83        Client device subnodes use below standard properties.
84
85      properties:
86        phandle: true
87        pinmux:
88          description:
89            Values are constructed from GPIO port number, pin number, and
90            alternate function configuration number using the RZG2L_PORT_PINMUX()
91            helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h>.
92        pins: true
93        drive-strength:
94          enum: [ 2, 4, 8, 12 ]
95        output-impedance-ohms:
96          enum: [ 33, 50, 66, 100 ]
97        power-source:
98          description: I/O voltage in millivolt.
99          enum: [ 1800, 2500, 3300 ]
100        slew-rate: true
101        gpio-hog: true
102        gpios: true
103        input-enable: true
104        output-high: true
105        output-low: true
106        line-name: true
107
108    - type: object
109      properties:
110        phandle: true
111
112      additionalProperties:
113        $ref: "#/additionalProperties/anyOf/0"
114
115allOf:
116  - $ref: "pinctrl.yaml#"
117
118required:
119  - compatible
120  - reg
121  - gpio-controller
122  - '#gpio-cells'
123  - gpio-ranges
124  - interrupt-controller
125  - '#interrupt-cells'
126  - clocks
127  - power-domains
128  - resets
129
130examples:
131  - |
132    #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
133    #include <dt-bindings/clock/r9a07g044-cpg.h>
134
135    pinctrl: pinctrl@11030000 {
136            compatible = "renesas,r9a07g044-pinctrl";
137            reg = <0x11030000 0x10000>;
138
139            gpio-controller;
140            #gpio-cells = <2>;
141            gpio-ranges = <&pinctrl 0 0 392>;
142            interrupt-controller;
143            #interrupt-cells = <2>;
144            clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
145            resets = <&cpg R9A07G044_GPIO_RSTN>,
146                     <&cpg R9A07G044_GPIO_PORT_RESETN>,
147                     <&cpg R9A07G044_GPIO_SPARE_RESETN>;
148            power-domains = <&cpg>;
149
150            scif0_pins: serial0 {
151                    pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* Tx */
152                             <RZG2L_PORT_PINMUX(38, 1, 1)>; /* Rx */
153            };
154
155            i2c1_pins: i2c1 {
156                    pins = "RIIC1_SDA", "RIIC1_SCL";
157                    input-enable;
158            };
159
160            sd1-pwr-en-hog {
161                    gpio-hog;
162                    gpios = <RZG2L_GPIO(39, 2) 0>;
163                    output-high;
164                    line-name = "sd1_pwr_en";
165            };
166
167            sdhi1_pins: sd1 {
168                    sd1_mux {
169                            pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
170                                     <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
171                            power-source  = <3300>;
172                    };
173
174                    sd1_data {
175                            pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
176                            power-source  = <3300>;
177                    };
178
179                    sd1_ctrl {
180                            pins = "SD1_CLK", "SD1_CMD";
181                            power-source  = <3300>;
182                    };
183            };
184    };
185