1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sm6375-tlmm.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Technologies, Inc. SM6375 TLMM block
8
9maintainers:
10  - Konrad Dybcio <konrad.dybcio@somainline.org>
11
12description: |
13  This binding describes the Top Level Mode Multiplexer (TLMM) block found
14  in the SM6375 platform.
15
16allOf:
17  - $ref: "pinctrl.yaml#"
18  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
19
20properties:
21  compatible:
22    const: qcom,sm6375-tlmm
23
24  reg:
25    maxItems: 1
26
27  interrupts: true
28  interrupt-controller: true
29  '#interrupt-cells': true
30  gpio-controller: true
31  gpio-reserved-ranges: true
32  '#gpio-cells': true
33  gpio-ranges: true
34  wakeup-parent: true
35
36required:
37  - compatible
38  - reg
39
40additionalProperties: false
41
42patternProperties:
43  '-state$':
44    oneOf:
45      - $ref: "#/$defs/qcom-sm6375-tlmm-state"
46      - patternProperties:
47          ".*":
48            $ref: "#/$defs/qcom-sm6375-tlmm-state"
49
50$defs:
51  qcom-sm6375-tlmm-state:
52    type: object
53    description:
54      Pinctrl node's client devices use subnodes for desired pin configuration.
55      Client device subnodes use below standard properties.
56    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
57
58    properties:
59      pins:
60        description:
61          List of gpio pins affected by the properties specified in this
62          subnode.
63        items:
64          oneOf:
65            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$"
66            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
67                      sdc2_cmd, sdc2_data ]
68        minItems: 1
69        maxItems: 36
70
71      function:
72        description:
73          Specify the alternative function to be configured for the specified
74          pins.
75
76        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
77                atest_char2, atest_char3, atest_tsens, atest_tsens2,
78                atest_usb1, atest_usb10, atest_usb11, atest_usb12,
79                atest_usb13, atest_usb2, atest_usb20, atest_usb21,
80                atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk,
81                cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2,
82                cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist,
83                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd,
84                gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
85                gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext,
86                m_voc, mclk, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
87                mdp_vsync3, mi2s_0, mi2s_1, mi2s_2, mss_lte, nav_gpio,
88                nav_pps, pa_indicator, phase_flag0, phase_flag1, phase_flag10,
89                phase_flag11, phase_flag12, phase_flag13, phase_flag14,
90                phase_flag15, phase_flag16, phase_flag17, phase_flag18,
91                phase_flag19, phase_flag2, phase_flag20, phase_flag21,
92                phase_flag22, phase_flag23, phase_flag24, phase_flag25,
93                phase_flag26, phase_flag27, phase_flag28, phase_flag29,
94                phase_flag3, phase_flag30, phase_flag31, phase_flag4,
95                phase_flag5, phase_flag6, phase_flag7, phase_flag8,
96                phase_flag9, pll_bist, pll_bypassnl, pll_clk, pll_reset,
97                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
98                qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
99                qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15,
100                qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
101                qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
102                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
103                qlink1_wmss, qup00, qup01, qup02, qup10, qup11_f1, qup11_f2,
104                qup12, qup13_f1, qup13_f2, qup14, sd_write, sdc1_tb, sdc2_tb,
105                sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
106                tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset,
107                uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac,
108                usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
109                wlan2_adc0, wlan2_adc1 ]
110
111
112      bias-disable: true
113      bias-pull-down: true
114      bias-pull-up: true
115      drive-strength: true
116      input-enable: true
117      output-high: true
118      output-low: true
119
120    required:
121      - pins
122      - function
123
124    additionalProperties: false
125
126examples:
127  - |
128        #include <dt-bindings/interrupt-controller/arm-gic.h>
129        pinctrl@500000 {
130                compatible = "qcom,sm6375-tlmm";
131                reg = <0x00500000 0x800000>;
132                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
133                gpio-controller;
134                #gpio-cells = <2>;
135                interrupt-controller;
136                #interrupt-cells = <2>;
137                gpio-ranges = <&tlmm 0 0 157>;
138
139                gpio-wo-subnode-state {
140                        pins = "gpio1";
141                        function = "gpio";
142                };
143
144                uart-w-subnodes-state {
145                        rx {
146                                pins = "gpio18";
147                                function = "qup13_f2";
148                                bias-pull-up;
149                        };
150
151                        tx {
152                                pins = "gpio19";
153                                function = "qup13_f2";
154                                bias-disable;
155                        };
156                };
157        };
158...
159