1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-tlmm.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Technologies, Inc. SM6350 TLMM block
8
9maintainers:
10  - Konrad Dybcio <konrad.dybcio@somainline.org>
11
12description:
13  Top Level Mode Multiplexer pin controller in Qualcomm SM6350 SoC.
14
15allOf:
16  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
17
18properties:
19  compatible:
20    const: qcom,sm6350-tlmm
21
22  reg:
23    maxItems: 1
24
25  interrupts: true
26  interrupt-controller: true
27  "#interrupt-cells": true
28  gpio-controller: true
29  gpio-reserved-ranges: true
30  "#gpio-cells": true
31  gpio-ranges: true
32  wakeup-parent: true
33
34required:
35  - compatible
36  - reg
37
38additionalProperties: false
39
40patternProperties:
41  "-state$":
42    oneOf:
43      - $ref: "#/$defs/qcom-sm6350-tlmm-state"
44      - patternProperties:
45          "-pins$":
46            $ref: "#/$defs/qcom-sm6350-tlmm-state"
47        additionalProperties: false
48
49$defs:
50  qcom-sm6350-tlmm-state:
51    type: object
52    description:
53      Pinctrl node's client devices use subnodes for desired pin configuration.
54      Client device subnodes use below standard properties.
55    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
56
57    properties:
58      pins:
59        description:
60          List of gpio pins affected by the properties specified in this
61          subnode.
62        items:
63          oneOf:
64            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$"
65            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
66        minItems: 1
67        maxItems: 36
68
69      function:
70        description:
71          Specify the alternative function to be configured for the specified
72          pins.
73
74        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, atest_char2,
75                atest_char3, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
76                atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, atest_usb22,
77                atest_usb23, audio_ref, btfm_slimbus, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
78                cam_mclk4, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
79                cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3,
80                dp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
81                gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext, m_voc, mclk,
82                mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, mi2s_2,
83                mss_lte, nav_gpio, nav_pps, pa_indicator, pcie0_clk, phase_flag0, phase_flag1,
84                phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
85                phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
86                phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
87                phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
88                phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9,
89                pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, qdss_gpio, qdss_gpio0,
90                qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
91                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
92                qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss,
93                qlink1_enable, qlink1_request, qlink1_wmss, qup00, qup01, qup02, qup10, qup11,
94                qup12, qup13_f1, qup13_f2, qup14, rffe0_clk, rffe0_data, rffe1_clk, rffe1_data,
95                rffe2_clk, rffe2_data, rffe3_clk, rffe3_data, rffe4_clk, rffe4_data, sd_write,
96                sdc1_tb, sdc2_tb, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
97                tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
98                uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
99                wlan2_adc0, wlan2_adc1, ]
100
101
102      bias-disable: true
103      bias-pull-down: true
104      bias-pull-up: true
105      drive-strength: true
106      input-enable: true
107      output-high: true
108      output-low: true
109
110    required:
111      - pins
112
113    additionalProperties: false
114
115examples:
116  - |
117    #include <dt-bindings/interrupt-controller/arm-gic.h>
118    pinctrl@f100000 {
119        compatible = "qcom,sm6350-tlmm";
120        reg = <0x0f100000 0x300000>;
121        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
122        gpio-controller;
123        #gpio-cells = <2>;
124        interrupt-controller;
125        #interrupt-cells = <2>;
126        gpio-ranges = <&tlmm 0 0 157>;
127
128        gpio-wo-subnode-state {
129            pins = "gpio1";
130            function = "gpio";
131        };
132
133        uart-w-subnodes-state {
134            rx-pins {
135                pins = "gpio25";
136                function = "qup13_f2";
137                bias-disable;
138            };
139
140            tx-pins {
141                pins = "gpio26";
142                function = "qup13_f2";
143                bias-disable;
144            };
145        };
146    };
147...
148