1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8074-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm IPQ8074 TLMM pin controller
8
9maintainers:
10  - Bjorn Andersson <andersson@kernel.org>
11  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
12
13description:
14  Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC.
15
16properties:
17  compatible:
18    const: qcom,ipq8074-pinctrl
19
20  reg:
21    maxItems: 1
22
23  interrupts:
24    maxItems: 1
25
26  interrupt-controller: true
27  "#interrupt-cells": true
28  gpio-controller: true
29  "#gpio-cells": true
30  gpio-ranges: true
31  wakeup-parent: true
32
33  gpio-reserved-ranges:
34    minItems: 1
35    maxItems: 35
36
37  gpio-line-names:
38    maxItems: 70
39
40patternProperties:
41  "-state$":
42    oneOf:
43      - $ref: "#/$defs/qcom-ipq8074-tlmm-state"
44      - patternProperties:
45          "-pins$":
46            $ref: "#/$defs/qcom-ipq8074-tlmm-state"
47        additionalProperties: false
48
49$defs:
50  qcom-ipq8074-tlmm-state:
51    type: object
52    description:
53      Pinctrl node's client devices use subnodes for desired pin configuration.
54      Client device subnodes use below standard properties.
55    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
56    unevaluatedProperties: false
57
58    properties:
59      pins:
60        description:
61          List of gpio pins affected by the properties specified in this
62          subnode.
63        items:
64          pattern: "^gpio([0-9]|[1-6][0-9]|70)$"
65        minItems: 1
66        maxItems: 36
67
68      function:
69        description:
70          Specify the alternative function to be configured for the specified
71          pins.
72
73        enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
74                atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync,
75                audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync,
76                audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c,
77                blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart,
78                blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2,
79                blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0,
80                blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi,
81                blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, cxc0,
82                cxc1, dbg_out, gcc_plltest, gcc_tlmm, ldo_en, ldo_update, led0,
83                led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, mac1_sa1, mac1_sa2,
84                mac1_sa3, mac2_sa0, mac2_sa1, mdc, mdio, pcie0_clk, pcie0_rst,
85                pcie0_wake, pcie1_clk, pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx,
86                pcm_fsync, pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0,
87                pta1_1, pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3,
88                qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
89                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
90                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
91                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
92                qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
93                qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write,
94                tsens_max, wci2a, wci2b, wci2c, wci2d ]
95
96    required:
97      - pins
98
99allOf:
100  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
101
102required:
103  - compatible
104  - reg
105
106additionalProperties: false
107
108examples:
109  - |
110    #include <dt-bindings/interrupt-controller/arm-gic.h>
111
112    tlmm: pinctrl@1000000 {
113        compatible = "qcom,ipq8074-pinctrl";
114        reg = <0x01000000 0x300000>;
115        gpio-controller;
116        #gpio-cells = <0x2>;
117        gpio-ranges = <&tlmm 0 0 70>;
118        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
119        interrupt-controller;
120        #interrupt-cells = <0x2>;
121
122        serial4-state {
123            pins = "gpio23", "gpio24";
124            function = "blsp4_uart1";
125            drive-strength = <8>;
126            bias-disable;
127        };
128    };
129