1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,tlmm-common.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Technologies, Inc. Top Level Mode Multiplexer (TLMM) definitions
8
9maintainers:
10  - Bjorn Andersson <bjorn.andersson@linaro.org>
11
12description:
13  This defines the common properties used to describe all Qualcomm Top Level
14  Mode Multiplexer bindings and pinconf/pinmux states for these.
15
16properties:
17  interrupts:
18    description:
19      TLMM summary IRQ and dirconn interrupts.
20    minItems: 1
21    maxItems: 9
22
23  interrupt-controller: true
24
25  '#interrupt-cells':
26    description:
27      Specifies the PIN numbers and Flags, as defined in defined in
28      include/dt-bindings/interrupt-controller/irq.h
29    const: 2
30
31  gpio-controller: true
32
33  '#gpio-cells':
34    description:
35      Specifying the pin number and flags, as defined in
36      include/dt-bindings/gpio/gpio.h
37    const: 2
38
39  gpio-ranges:
40    maxItems: 1
41
42  wakeup-parent:
43    description:
44      Specifying the interrupt-controller used to wake up the system when the
45      TLMM block has been powered down.
46
47  gpio-reserved-ranges:
48    description:
49      Pins can be reserved for trusted applications and thereby unaccessible
50      from the OS.  This property can be used to mark the pins which resources
51      should not be accessed by the OS. Please see the ../gpio/gpio.txt for more
52      information.
53
54allOf:
55  - $ref: "pinctrl.yaml#"
56
57required:
58  - interrupts
59  - interrupt-controller
60  - '#interrupt-cells'
61  - gpio-controller
62  - '#gpio-cells'
63  - gpio-ranges
64
65additionalProperties: true
66
67$defs:
68  qcom-tlmm-state:
69    properties:
70      drive-strength:
71        enum: [2, 4, 6, 8, 10, 12, 14, 16]
72        description:
73          Selects the drive strength for the specified pins, in mA.
74
75      bias-pull-down: true
76      bias-pull-up: true
77      bias-disable: true
78      input-enable: false
79      output-disable: true
80      output-enable: true
81      output-high: true
82      output-low: true
83
84    allOf:
85      - $ref: pincfg-node.yaml#
86      - $ref: pinmux-node.yaml#
87
88      - if:
89          properties:
90            pins:
91              items:
92                pattern: "^gpio"
93        then:
94          required:
95            - function
96        else:
97          properties:
98            function: false
99
100    additionalProperties: true
101...
102