1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Mediatek MT65xx Pin Controller
8
9maintainers:
10  - Sean Wang <sean.wang@kernel.org>
11
12description: |+
13  The Mediatek's Pin controller is used to control SoC pins.
14
15properties:
16  compatible:
17    enum:
18      - mediatek,mt2701-pinctrl
19      - mediatek,mt2712-pinctrl
20      - mediatek,mt6397-pinctrl
21      - mediatek,mt7623-pinctrl
22      - mediatek,mt8127-pinctrl
23      - mediatek,mt8135-pinctrl
24      - mediatek,mt8167-pinctrl
25      - mediatek,mt8173-pinctrl
26      - mediatek,mt8516-pinctrl
27
28  reg:
29    maxItems: 1
30
31  pins-are-numbered:
32    $ref: /schemas/types.yaml#/definitions/flag
33    description: |
34      Specify the subnodes are using numbered pinmux to specify pins. (UNUSED)
35    deprecated: true
36
37  gpio-controller: true
38
39  "#gpio-cells":
40    const: 2
41    description: |
42      Number of cells in GPIO specifier. Since the generic GPIO
43      binding is used, the amount of cells must be specified as 2. See the below
44      mentioned gpio binding representation for description of particular cells.
45
46  mediatek,pctl-regmap:
47    $ref: /schemas/types.yaml#/definitions/phandle-array
48    items:
49      maxItems: 1
50    minItems: 1
51    maxItems: 2
52    description: |
53      Should be phandles of the syscfg node.
54
55  interrupt-controller: true
56
57  interrupts:
58    minItems: 1
59    maxItems: 3
60
61  "#interrupt-cells":
62    const: 2
63
64required:
65  - compatible
66  - gpio-controller
67  - "#gpio-cells"
68
69allOf:
70  - $ref: "pinctrl.yaml#"
71
72patternProperties:
73  '-[0-9]+$':
74    type: object
75    additionalProperties: false
76    patternProperties:
77      'pins':
78        type: object
79        additionalProperties: false
80        description: |
81          A pinctrl node should contain at least one subnodes representing the
82          pinctrl groups available on the machine. Each subnode will list the
83          pins it needs, and how they should be configured, with regard to muxer
84          configuration, pullups, drive strength, input enable/disable and input
85          schmitt.
86        $ref: "/schemas/pinctrl/pincfg-node.yaml"
87
88        properties:
89          pinmux:
90            description:
91              integer array, represents gpio pin number and mux setting.
92              Supported pin number and mux varies for different SoCs, and are
93              defined as macros in <soc>-pinfunc.h directly.
94
95          bias-disable: true
96
97          bias-pull-up:
98            description: |
99              Besides generic pinconfig options, it can be used as the pull up
100              settings for 2 pull resistors, R0 and R1. User can configure those
101              special pins. Some macros have been defined for this usage, such
102              as MTK_PUPD_SET_R1R0_00. See dt-bindings/pinctrl/mt65xx.h for
103              valid arguments.
104
105          bias-pull-down: true
106
107          input-enable: true
108
109          input-disable: true
110
111          output-low: true
112
113          output-high: true
114
115          input-schmitt-enable: true
116
117          input-schmitt-disable: true
118
119          drive-strength:
120            description: |
121              Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA,
122              etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments.
123
124        required:
125          - pinmux
126
127additionalProperties: false
128
129examples:
130  - |
131    #include <dt-bindings/interrupt-controller/irq.h>
132    #include <dt-bindings/interrupt-controller/arm-gic.h>
133    #include <dt-bindings/pinctrl/mt8135-pinfunc.h>
134
135    soc {
136        #address-cells = <2>;
137        #size-cells = <2>;
138
139        syscfg_pctl_a: syscfg-pctl-a@10005000 {
140          compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
141          reg = <0 0x10005000 0 0x1000>;
142        };
143
144        syscfg_pctl_b: syscfg-pctl-b@1020c020 {
145          compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
146          reg = <0 0x1020C020 0 0x1000>;
147        };
148
149        pinctrl@1c20800 {
150          compatible = "mediatek,mt8135-pinctrl";
151          reg = <0 0x1000B000 0 0x1000>;
152          mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
153          gpio-controller;
154          #gpio-cells = <2>;
155          interrupt-controller;
156          #interrupt-cells = <2>;
157          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
158              <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
159              <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
160
161          i2c0_pins_a: i2c0-0 {
162            pins1 {
163              pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
164                <MT8135_PIN_101_SCL0__FUNC_SCL0>;
165              bias-disable;
166            };
167          };
168
169          i2c1_pins_a: i2c1-0 {
170            pins {
171              pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
172                <MT8135_PIN_196_SCL1__FUNC_SCL1>;
173              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
174            };
175          };
176
177          i2c2_pins_a: i2c2-0 {
178            pins1 {
179              pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
180              bias-pull-down;
181            };
182
183            pins2 {
184              pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
185              bias-pull-up;
186            };
187          };
188
189          i2c3_pins_a: i2c3-0 {
190            pins1 {
191              pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
192                <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
193              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
194            };
195
196            pins2 {
197              pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
198                <MT8135_PIN_36_SDA3__FUNC_SDA3>;
199              output-low;
200              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
201            };
202
203            pins3 {
204              pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
205                <MT8135_PIN_60_JTDI__FUNC_JTDI>;
206              drive-strength = <32>;
207            };
208          };
209        };
210    };
211