1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/cirrus,madera.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Cirrus Logic Madera class audio CODECs pinctrl driver
8
9maintainers:
10  - patches@opensource.cirrus.com
11
12description: |
13  The Cirrus Logic Madera codecs provide a number of GPIO functions for
14  interfacing to external hardware and to provide logic outputs to other devices.
15  Certain groups of GPIO pins also have an alternate function, normally as an
16  audio interface.
17
18  The set of available GPIOs, functions and alternate function groups differs
19  between CODECs so refer to the datasheet for the CODEC for further information
20  on what is supported on that device.
21
22  The properties for this driver exist within the parent MFD driver node.
23
24  See also the core bindings for the parent MFD driver:
25
26    Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
27
28  And the generic pinmix bindings:
29
30    Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
31
32properties:
33  pin-settings:
34    description:
35      One subnode is required to contain the default settings. It
36      contains an arbitrary number of configuration subnodes, one for
37      each group or pin configuration you want to apply as a default.
38    type: object
39    patternProperties:
40      '-pins$':
41        type: object
42        allOf:
43          - $ref: "pincfg-node.yaml#"
44          - $ref: "pinmux-node.yaml#"
45        properties:
46          groups:
47            description:
48              Name of one pin group to configure.
49            enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1,
50                    pdmspk2, dmic4, dmic5, dmic6, gpio1, gpio2, gpio3,
51                    gpio4, gpio5, gpio6, gpio7, gpio8, gpio9,
52                    gpio10, gpio11, gpio12, gpio13, gpio14, gpio15,
53                    gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
54                    gpio22, gpio23, gpio24, gpio25, gpio26, gpio27,
55                    gpio28, gpio29, gpio30, gpio31, gpio32, gpio33,
56                    gpio34, gpio35, gpio36, gpio37, gpio38, gpio39 ]
57
58          function:
59            description:
60              Name of function to assign to this group.
61            enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3,
62                    pdmspk1, pdmspk2, dmic3, dmic4, dmic5,
63                    dmic6, io, dsp-gpio, irq1, irq2, fll1-clk,
64                    fll1-lock, fll2-clk, fll2-lock, fll3-clk,
65                    fll3-lock, fllao-clk, fllao-lock, opclk,
66                    opclk-async, pwm1, pwm2, spdif, asrc1-in1-lock,
67                    asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock,
68                    spkl-short-circuit, spkr-short-circuit,
69                    spk-shutdown, spk-overheat-shutdown,
70                    spk-overheat-warn, timer1-sts, timer2-sts,
71                    timer3-sts, timer4-sts, timer5-sts, timer6-sts,
72                    timer7-sts, timer8-sts, log1-fifo-ne,
73                    log2-fifo-ne, log3-fifo-ne, log4-fifo-ne,
74                    log5-fifo-ne, log6-fifo-ne, log7-fifo-ne,
75                    log8-fifo-ne ]
76
77          bias-disable: true
78
79          bias-bus-hold: true
80
81          bias-pull-up: true
82
83          bias-pull-down: true
84
85          drive-push-pull: true
86
87          drive-open-drain: true
88
89          drive-strength:
90            enum: [ 4, 8 ]
91
92          input-schmitt-enable: true
93
94          input-schmitt-disable: true
95
96          input-debounce: true
97
98          output-low: true
99
100          output-high: true
101
102        additionalProperties: false
103
104        required:
105          - groups
106
107    additionalProperties: false
108
109required:
110  - pinctrl-0
111  - pinctrl-names
112
113additionalProperties: true
114