1Broadcom Northstar2 IOMUX Controller
2
3The Northstar2 IOMUX controller supports group based mux configuration. There
4are some individual pins that support modifying the pinconf parameters.
5
6Required properties:
7
8- compatible:
9    Must be "brcm,ns2-pinmux"
10
11- reg:
12    Define the base and range of the I/O address space that contains the
13    Northstar2 IOMUX and pin configuration registers.
14
15Properties in sub nodes:
16
17- function:
18    The mux function to select
19
20- groups:
21    The list of groups to select with a given function
22
23- pins:
24    List of pin names to change configuration
25
26The generic properties bias-disable, bias-pull-down, bias-pull-up,
27drive-strength, slew-rate, input-enable, input-disable are supported
28for some individual pins listed at the end.
29
30For more details, refer to
31Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
32
33For example:
34
35	pinctrl: pinctrl@6501d130 {
36		compatible = "brcm,ns2-pinmux";
37		reg = <0x6501d130 0x08>,
38		      <0x660a0028 0x04>,
39		      <0x660009b0 0x40>;
40
41		pinctrl-names = "default";
42		pinctrl-0 = <&nand_sel &uart3_rx &sdio0_d4>;
43
44		/* Select nand function */
45		nand_sel: nand_sel {
46			function = "nand";
47			groups = "nand_grp";
48		};
49
50		/* Pull up the uart3 rx pin */
51		uart3_rx: uart3_rx {
52			pins = "uart3_sin";
53			bias-pull-up;
54		};
55
56		/* Set the drive strength of sdio d4 pin */
57		sdio0_d4: sdio0_d4 {
58			pins = "sdio0_data4";
59			drive-strength = <8>;
60		};
61	};
62
63List of supported functions and groups in Northstar2:
64
65"nand": "nand_grp"
66
67"nor": "nor_data_grp", "nor_adv_grp", "nor_addr_0_3_grp", "nor_addr_4_5_grp",
68	"nor_addr_6_7_grp", "nor_addr_8_9_grp", "nor_addr_10_11_grp",
69	"nor_addr_12_15_grp"
70
71"gpio": "gpio_0_1_grp", "gpio_2_5_grp", "gpio_6_7_grp", "gpio_8_9_grp",
72	"gpio_10_11_grp", "gpio_12_13_grp", "gpio_14_17_grp", "gpio_18_19_grp",
73	"gpio_20_21_grp", "gpio_22_23_grp", "gpio_24_25_grp", "gpio_26_27_grp",
74	"gpio_28_29_grp", "gpio_30_31_grp"
75
76"pcie": "pcie_ab1_clk_wak_grp", "pcie_a3_clk_wak_grp", "pcie_b3_clk_wak_grp",
77	"pcie_b2_clk_wak_grp", "pcie_a2_clk_wak_grp"
78
79"uart0": "uart0_modem_grp", "uart0_rts_cts_grp", "uart0_in_out_grp"
80
81"uart1": "uart1_ext_clk_grp", "uart1_dcd_dsr_grp", "uart1_ri_dtr_grp",
82	"uart1_rts_cts_grp", "uart1_in_out_grp"
83
84"uart2": "uart2_rts_cts_grp"
85
86"pwm": "pwm_0_grp", "pwm_1_grp", "pwm_2_grp", "pwm_3_grp"
87
88
89List of pins that support pinconf parameters:
90
91"qspi_wp", "qspi_hold", "qspi_cs", "qspi_sck", "uart3_sin", "uart3_sout",
92"qspi_mosi", "qspi_miso", "spi0_fss", "spi0_rxd", "spi0_txd", "spi0_sck",
93"spi1_fss", "spi1_rxd", "spi1_txd", "spi1_sck", "sdio0_data7",
94"sdio0_emmc_rst", "sdio0_led_on", "sdio0_wp", "sdio0_data3", "sdio0_data4",
95"sdio0_data5", "sdio0_data6", "sdio0_cmd", "sdio0_data0", "sdio0_data1",
96"sdio0_data2", "sdio1_led_on", "sdio1_wp", "sdio0_cd_l", "sdio0_clk",
97"sdio1_data5", "sdio1_data6", "sdio1_data7", "sdio1_emmc_rst", "sdio1_data1",
98"sdio1_data2", "sdio1_data3", "sdio1_data4", "sdio1_cd_l", "sdio1_clk",
99"sdio1_cmd", "sdio1_data0", "ext_mdio_0", "ext_mdc_0", "usb3_p1_vbus_ppc",
100"usb3_p1_overcurrent", "usb3_p0_vbus_ppc", "usb3_p0_overcurrent",
101"usb2_presence_indication", "usb2_vbus_present", "usb2_vbus_ppc",
102"usb2_overcurrent", "sata_led1", "sata_led0"
103