1* Marvell PXA1928 USB and HSIC PHYs
2
3Required properties:
4- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy"
5- reg: base address and length of the registers
6- clocks - A single clock. From common clock binding.
7- #phys-cells: should be 0. From common phy binding.
8- resets: reference to the reset controller
9
10Example:
11
12	usbphy: phy@7000 {
13		compatible = "marvell,pxa1928-usb-phy";
14		reg = <0x7000 0xe0>;
15		clocks = <&apmu_clocks PXA1928_CLK_USB>;
16		#phy-cells = <0>;
17	};
18
19