xref: /openbmc/linux/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt (revision 4e3fe1cb)

ROCKCHIP HDMI PHY WITH INNO IP BLOCK

Required properties:
 - compatible : should be one of the listed compatibles:
	* "rockchip,rk3228-hdmi-phy",
	* "rockchip,rk3328-hdmi-phy";
 - reg : Address and length of the hdmi phy control register set
 - clocks : phandle + clock specifier for the phy clocks
 - clock-names : string, clock name, must contain "sysclk" for system
	  control and register configuration, "refoclk" for crystal-
	  oscillator reference PLL clock input and "refpclk" for pclk-
	  based refeference PLL clock input.
 - #clock-cells: should be 0.
 - clock-output-names : shall be the name for the output clock.
 - interrupts : phandle + interrupt specified for the hdmiphy interrupt
 - #phy-cells : must be 0. See ./phy-bindings.txt for details.

Optional properties for rk3328-hdmi-phy:
 - nvmem-cells = phandle + nvmem specifier for the cpu-version efuse
 - nvmem-cell-names : "cpu-version" to read the chip version, required
	  for adjustment to some frequency settings

Example:
	hdmi_phy: hdmi-phy@12030000 {
		compatible = "rockchip,rk3228-hdmi-phy";
		reg = <0x12030000 0x10000>;
		#phy-cells = <0>;
		clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
		clock-names = "sysclk", "refoclk", "refpclk";
		#clock-cells = <0>;
		clock-output-names = "hdmi_phy";
		status = "disabled";
	};

Then the PHY can be used in other nodes such as:

	hdmi: hdmi@200a0000 {
		compatible = "rockchip,rk3228-dw-hdmi";
		...
		phys = <&hdmi_phy>;
		phy-names = "hdmi";
		...
	};